Makes me wonder if these ceramic bezels could withstand sudden shock cooling.Like being cooled to subzero temps, then emersed into warm water.Not gonna try, but reasoning tells me that they wouldnt do so good.

terrible pics!!!
Everyone's nightmare!!!
A replacement is very expensive!!! easy 5 - 6 hundred $ ( maybe more)

Hi I am new to the Rolex forum I just bought my friends Rolex Deepsea and it has a similar problem. There is a crack on the left corner of white circle on the top of the bezel. It is not a big crack and i am more concerned for cosmetic reasons then any dive complications. Does any one know a estimate on a repair price and the time I will have to leave it to be fixed. Also can they just change that circle it is encased in metal or will i have to get a new bezel insert or something like that. I don't have a relationship with any particular AD but the guy i bought it from got it at tournou. I heard there very reputable but over priced. Any help on this matter would appreciated sorry for all the questions.

The Deep Sea is a bigger watch than the old Seadweller, so I don't think the bezel inserts are interchangeable.

:cheers:

Looks like the crystal is chipped as well. I betif you took that watch to RSC they would recommend changing that as well as the bezel.

Not to sound like a noob buy what is RSC? I had the crystal checked it's a scratch not a chip but I would still like it fixed. Does any one know how much it would be to change out the crystal with installation.

Sorry to hear about this. Yes, as some have suggested, take it back to the AD soonest. Pls let us know what the AD did or did not do to help resolve this issue. Isn't ther bezel insert made of ceramic that is supposed to a strong material used for that purpose?

Anyhoot, best of luck to ya!

Diving is a contact sport . . . :chuckle: . . . seriously, when you are gearing up, and when you are gearing down. Your slinging steel, nickel plated brass, and aluminum all over the place, and its easy to knock your wrist into something and not notice it, especially if your wearing your watch over a dry-suit or wetsuit. If your on a cattle boat with other divers, then you get a full on assault from the guy next to you, add if the boat is a rocking, ten fold.

That being said it is very easy to get your gear banged up and not notice it because your focused on so many things. Getting your gear together, getting in your gear, checking your budd's gear, sweating your but off, listening to the captain and divemaster, getting up, getting to the platform, getting your fins while the boat is a rockin, and then finally taking the giant stride. Thats just getting off the boat :chuckle: If you are the occassional vacation diver, its even more stressfull, because not your doing on a regular basis.

http://i247.photobucket.com/albums/g...hernlights.jpg

Don't sweat the small stuff, get it fixed and move on, I know it sucks, BOHICA

The problem with a big and thick watch (other than reduced comfort) is that they get bashed around and hooked up on equipment straps a lot more than a smaller one. This gives them a hard life. The raised luminous capsule in the ceramic inserts causes a weakness because it protrudes enough to get knocked and then transmits the entire force of the knock to a small area (that is already weakened by having a hole in it).

The other design flaws, like the bezel that turns too easily and also the very high cost and finally the obsolete nature of this type of diving equipment make it hard to accept that Rolex intend this new model to be an actual working diving watch.

Rolex Servivce Centre (Center in the USA) :thumbsup:

Update
I tried 2 different ADs and they both say they'll have to replace the whole bezel. They won't even give me a estimate. They said it takes 3 weeks after being sent in to Rolex to even get a price. I don't know what to do i want it fixed but i dont wanna send it out to find out it is a grand for the bezel. Both ADs professional opinion was to just keep it as is scince it's minimal and has no function. What are you guys suggestions?

The ceramic bezel is a Rolex only replacement part. I has to be sent to Rolex for repair. The insert alone is about 3 to 4 hundred installed and a bezel complete is approximately 600. The bezel has nothing to do with water resistance if you're going to dive alot I wouldn't replace it till it needs a service. Rik

These ADssss ugg,
Since you are in NY, call NY RSC. Ask for the service manager. Be very specific: What is the price for an insert and crystal for a deep sea. They might say they will not replace the crystal without service. Ask them what the cost is for a crystal and insert at service then. Is the watch still under warranty?
Contact Info:

Rolex Watch Usa Inc Business Information
Name: Rolex Watch Usa Inc
Address: 665 5th Ave # 6
City: New York

State: New York, US

Zip Code: 10022
Telephone: (212) 758-7700
Fax: (212) 371-0371
URL: n/a
Categories: Watches (Wholesale)

Services: n/a
Products: n/a
Brands: n/a
Nearest Major Intersection: 52nd St E & Madison Ave
Coordinates: 40.760210, -73.975977

I'd venture to say that less than 1% of these watches are used for diving. Not too many Speedmasters used for timing races either!!!:chuckle:

Thanx cave diver I'll try that tomorrow. Widows son your absolutely right I dive a few times a year but I'll never even reach half this watch potential. It's a beautiful time piece I like it for it's style and class. I drive a Porsche but I'll never go 180mph it's all about finding the things that make you happy in life and utilizing them to suit your needs. Not saying material things make you happy love, friendship, and honor are most important but toys are hella fun lol.

:chuckle: I'm a 1 percenter :chuckle:

I agree 100%

I read a while back that another member on one of the forums broke his GMT2c insert after he dropped the watch on a tile floor. When he sent it to Rolex they wanted to full service it (to make sure the movement was ok after the fall) at a cost of $1200 give or take, inc bezel and insert.

I have not owned a ceramic rolex yet as I am a vintage guy, so I cant say if its more durable than the old metal inserts, but if i had a new Sub or GMT then i would be really carefull with it.

Lonnie

Let me correct that for you:

Maximum safe depth for normal recreational diving: 40M
Depth rating of DSSD : 3900M

Means you will never reach more than 1% of what the watch is capable of.

Professional saturation divers may get to work at up to 7% of the watches capability in exceptional circumstances.

No amount of technology will ever change this as its our physiological limitations. Over engineered - just a bit!

I love my DS but the ceramic is the part which I believe is the weakest part.

:chuckle: Its not what the watch is capable of, its what the watchmaker is capable of building

Not anymore!! Welcome to the future of Rolex!

Rolex's for the most part are very simple compared to some other ultra high end brands... All flashy and glossy... not like the old days.. those real tool watches are what made Rolex what it is today.

Lonnie

oH...that hurts...both wallet and my heart...aluminium didnt sound too bad at all seeing this...

Although the prices would be outdated now, here's a ballmark figure:


From this thread:

http://www.rolexforums.com/showthrea...ost#post412319

i think the GMTIIc bezel has platinum in it. does the deepsea?

Yup, it does.

As Bo said...It sure does!!:agree:

Ouch!

I would disagree, strongly. Its predecesor, original Rolex Deep Sea Special, seems pretty on par with Rolex heritage. Continuing to push boundries.

http://www.rolex.com/en#/rolex-watch...ep-sea-special

ceramic bezel inserts are much more expensive than the older alloy ones you are looking at 650-700 dollars, compared to 100 dollars for the older alloy type goodluck with it all