The truth about Rolex Service Center Polishing ?

[trandonnghia92]

Guy, any of you have your rolex to be polished by RSC ?

Are they really damage the watch or rounded-up the shape of the case/lug after just 1 polish ? Many thanks

[123Blueface]

I have never had an issue and wouldn’t consider using anyone else.
Some have had issues.

[Henrimontgomery]

You’ll get people saying it’s perfect that it doesn’t change anything and that Rolex has invented a way to polish a high volume of watches without any failure.

On the other hand you have people who have read the take of Sisyphus and don’t bother polishing.

[0nly5iv3Digits]

Polishing = metal being removed. Regardless of how you want to look at it, polishing will alter the look of the watch - to what extent and how well the polishing is executed comes down to the polisher. Watches are hand polished. So you’ll inevitably get a large degree of variation from person to person.

Unless you’re an absolute cave man with your watches (ie. deep dents etc), I don’t see the need to ever have a watch polished. If anything, just a light re-brushing of the bracelet.

My $0.02.

[Dendi]

Originally Posted by 0nly5iv3Digits

Polishing = metal being removed. Regardless of how you want to look at it, polishing will alter the look of the watch - to what extent and how well the polishing is executed comes down to the polisher. Watches are hand polished. So you’ll inevitably get a large degree of variation from person to person.

Unless you’re an absolute cave man with your watches (ie. deep dents etc), I don’t see the need to ever have a watch polished. If anything, just a light re-brushing of the bracelet.

My $0.02.

Agreed

[FL2024]

Originally Posted by 0nly5iv3Digits

Polishing = metal being removed. Regardless of how you want to look at it, polishing will alter the look of the watch - to what extent and how well the polishing is executed comes down to the polisher. Watches are hand polished. So you’ll inevitably get a large degree of variation from person to person.

Unless you’re an absolute cave man with your watches (ie. deep dents etc), I don’t see the need to ever have a watch polished. If anything, just a light re-brushing of the bracelet.

My $0.02.

Very untrue. Metal may be removed, but it's a micron or a few microns. To put in perspective, that's far less than a hair. The human eye isn't even capable of seeing anything less than 25 microns. If the polish is done by a skilled professional, you will not be able to notice any alteration from factory finish. The watch will look 95% new, minus maybe a few dents. It is only when the watchmaker is incompetent or inexperienced when things become noticeable.

[Dirt]

Originally Posted by 0nly5iv3Digits

Polishing = metal being removed. Regardless of how you want to look at it, polishing will alter the look of the watch - to what extent and how well the polishing is executed comes down to the polisher. Watches are hand polished. So you’ll inevitably get a large degree of variation from person to person.

Unless you’re an absolute cave man with your watches (ie. deep dents etc), I don’t see the need to ever have a watch polished. If anything, just a light re-brushing of the bracelet.

My $0.02.

True enough.

Expectations must be realistic.
A watch that goes in with micro marring on the polished surfaces will not have it's appearance perceptably changed over it's lifetime of polishing at service time.
Alternately, if the watch goes in looking like it was towed along the ground behind a car on a road trip from city to city couldn't be saved by JC himself to look factory fresh at the finish of the polishing.

[jamesbondOO7]

Don‘t

[messikens]

Agree - touch up the bracelet if you feel so inclined. Unless you have a super deep sing (laser weld), polishing invariably removes metal. You can tell esp on the bezel where the teeth are not as crisp and pronounced.

I'd stay away and just enjoy the unique character of your watch, it's your own scratches that truly makes a mass product a "piece unique"

[Bozzie1982]

I watches a YouTube video about polishing a few weeks back.

By his own admissions he was a watch maker by profession and weighed a sub before and after a polish.

It lost the equivalent of a hair in weight after the polish.

I'd have no hesitation getting rolex to perform a polish come service time. A few during its lifetime won't cause any issues imo.

[123Blueface]

Originally Posted by Bozzie1982

I watches a YouTube video about polishing a few weeks back.

By his own admissions he was a watch maker by profession and weighed a sub before and after a polish.

It lost the equivalent of a hair in weight after the polish.

I'd have no hesitation getting rolex to perform a polish come service time. A few during its lifetime won't cause any issues imo.

The way it always was before the internet, TRF and watches as investments. The way it will continue to be for this old fool I guess.

[t65tampa]

Every time I have had a Rolex serviced at an RSC, I’ve opted for their refinishing the case and bracelet. I have never had a watch not come back looking fantastic.


Sent from my iPhone using Tapatalk

[77T]

Originally Posted by trandonnghia92

Guy, any of you have your rolex to be polished by RSC ?

Are they really damage the watch or rounded-up the shape of the case/lug after just 1 polish ? Many thanks

Do you own a new model Rolex, or an older one?

No, they do not damage the shape of the case or lug profiles after just one polishing process.

If your watch case has pre-existing damage, then your experience will be different.


Sent from my iPhone using Tapatalk Pro

[brandrea]

Repairing bad dings and dents is my motto.

I wouldn’t polish a watch with simple scratches as they’ll just be back again in short order.

[Ferrari-F430]

To me, it's a matter of how often you get it serviced. If it's once in 10 or 20 years and it's one service, I can't see where that would be bad for a watch you wore every day and had some wear. If you're sending it out every few years, then no, I wouldn't recommend that.

[FL2024]

Do not be afraid of polishing a watch if it's banged up. Just have it done through RSC.

[7enderbender]

If you send it to RSC (especially Dallas) I think it’s perfectly fine. I always chuckle when people post picture asking if a watch has been polished and then the experts weigh in with opinions ranging from: it’s ruined to never been touched.
Unless there are deep scratches you won’t be able to tell. And it’ll look like new.

[Dan Pierce]

Originally Posted by 7enderbender

If you send it to RSC (especially Dallas) I think it’s perfectly fine. I always chuckle when people post picture asking if a watch has been polished and then the experts weigh in with opinions ranging from: it’s ruined to never been touched.
Unless there are deep scratches you won’t be able to tell. And it’ll look like new.

If only the armchair metallurgists could agree.
dP

[L_S_SHOE]

It’s a crapshoot. You have no way of knowing how good the tech is. Better to not polish it than have someone screw it up.


Sent from my iPhone using Tapatalk

[911cz]

If is really needs due to bigger dents and damage then go for it otherwise keep they way it is as it will get there again after the polish.

[thesharkfactor]

My brothers 3yr old blnr went in for repair, came back polished with soft edge case and bezel. Never again.

[padi56]

Originally Posted by trandonnghia92

Guy, any of you have your rolex to be polished by RSC ?

Are they really damage the watch or rounded-up the shape of the case/lug after just 1 polish ? Many thanks

Today there is a anti polish syndrome god knows why as long as its only done at normal routine RSC times. Picture below of my own working tool 16600SD I am sure this watch has seen more use and sometimes abuse than todays pampered watches will see in ten life times. Picture taken after last service in Singapore this was its third service and polish by various RSC world wide. Now had 4 services and polish and still looks good today now almost 25 years old. Having serviced many many Rolex watches over the plus 50 odd years of owning and wearing Rolex watches, never ever had a bad service or bad polish from any RSC. But must admit I don't have a loupe to expect every miniscule area of any watch I have ever owned.

[thesharkfactor]

I’d say the crown guards look a little thin and you got wide chamfers on the lugs there Padi?

[padi56]

Originally Posted by thesharkfactor

I’d say the crown guards look a little thin and you got wide chamfers on the lugs there Padi?

Sorry you don't know what you are talking about chamfers and lug guards are as they should be for a very late 1990s 16600 SD.

[thesharkfactor]

Originally Posted by padi56

Sorry you don't know what you are talking about chamfers and lug guards are as they should be for a very late 1990s 16600 SD.

Just looked a bit Bexley edged to me, but if I’m incorrect I accept that.

Hyper critical aside, truth is, it’s in lovely condition and I’d buy that myself.

[padi56]

Originally Posted by thesharkfactor

Just looked a bit Bexley edged to me, but if I’m incorrect I accept that.

Hyper critical aside, truth is, it’s in lovely condition and I’d buy that myself.

Well watch has had a hard life yes it was scratched but no deep gashes considering it was used as a working tool.But serviced regularly mainly around Asia,Africa and Caribbean where I was PADI/BSAC instructor and dive guide.

[Dirt]

Originally Posted by thesharkfactor

I’d say the crown guards look a little thin and you got wide chamfers on the lugs there Padi?

Yeah.
Now that you come to mention it.
It may appear that the chamfers are 2 or 3 thou wider at the end of the lugs than a factory fresh watch of that era.

Having said that.
I reckon Peter's watch has been pretty well babied compared with mine

[waterman1]

I’ll say just had my first experience with polishing. Result is outstanding and I cannot see any “overpolished negative effects”. I was pleasantly surprised. I’m one who would rather have the blemishes than a look that is unnatural by over polishing.

[lamadoo]

Lots of uneducated responses here.
Proper polishing moves the material not remove material! When it comes polishing, its an artwork and should only take it down to the micron. I would definitely trust RSC to do it. If you take your Rolex to any watchmaker or God forbid a jeweler or pre-own dealer for a polish, then they will remove material down to the defect!

Watch this video about what it means to 'moving material'

https://www.youtube.com/watch?v=jI_N2XRffdk

[Dirt]

Originally Posted by lamadoo

Lots of uneducated responses here.
Proper polishing moves the material not remove material! When it comes polishing, its an artwork and should only take it down to the micron. I would definitely trust RSC to do it. If you take your Rolex to any watchmaker or God forbid a jeweler or pre-own dealer for a polish, then they will remove material down to the defect!

Watch this video about what it means to 'moving material'

https://www.youtube.com/watch?v=jI_N2XRffdk

I'm curious
Do you see any necessity for Laser welding as a legitimate part of the polishing process?