ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
|
6 April 2019, 02:44 PM | #1 |
"TRF" Member
Join Date: Mar 2019
Location: North America
Watch: 116710 BLNR
Posts: 165
|
What the ffff - new Rolex bracelet detached
Watching a show on my couch and I go to sit up and hear a familiar jangle of a watch hitting the floor. My comfort quickly dissipated as I realize this was not my Seiko 5 SNFZ17 but in fact my three week old BLNR. Did I take it off and set it on my lap and forget about it? No. Picked it up and the links were detached just above the clasp. Seemed that one of the screw pins came out which caused the bracelet to detach and my watch to head straight for the floor. Lucky enough it landed on carpet and I was able to find the small link screw but what a near heart attack. Had I been walking down the street, on a train, swimming, literally on anywhere but carpet at my home for sure the link pin would have been gone and possibly the BLNR.
I’m going to go to the AD tmrw and have him tighten all the screws but any thoughts here? This incident definitely shakes my confidence in wearing the piece |
6 April 2019, 02:46 PM | #2 |
"TRF" Member
Join Date: May 2018
Location: Worldwide
Posts: 707
|
Tell them to make sure they put loctite this time
|
6 April 2019, 05:49 PM | #3 |
"TRF" Member
Join Date: Sep 2018
Real Name: Duncan
Location: London
Watch: DD 40
Posts: 2,263
|
|
6 April 2019, 02:47 PM | #4 |
"TRF" Member
Join Date: Jun 2015
Location: Houston TX
Posts: 1,328
|
Who sized the bracelet? There must not have been any loctite on the screws. The screws are not held in place by tightening them, they are really just pins with threaded ends. If there is no loctite, the movement of the links can back out the screw. It takes time to happen. The screw probably have been working loose for awhile. Easily fixable. Hopefully the watch did not get dinged when it hit the floor.
|
6 April 2019, 02:56 PM | #5 |
TRF Moderator & 2024 SUBMARINER Patron
Join Date: May 2007
Real Name: Larry
Location: Mojave Desert
Watch: GMT's
Posts: 43,389
|
periodically checking the screws is good insurance.
__________________
(Chill ... It's just a watch Forum.....) NAWCC Member |
6 April 2019, 06:56 PM | #6 |
Banned
Join Date: Jul 2007
Location: USA
Watch: of course
Posts: 8,429
|
|
6 April 2019, 03:02 PM | #7 |
"TRF" Member
Join Date: Jan 2011
Real Name: gus
Location: East Coast
Watch: APK & sometimes Y
Posts: 26,286
|
Take a picture of the screw heads before and after. RSC used an axe head on my bracelet screws.
__________________
|
6 April 2019, 09:20 PM | #8 |
Banned
Join Date: Nov 2013
Real Name: Jim Smyth
Location: Florida
Watch: DD
Posts: 1,842
|
|
6 April 2019, 10:43 PM | #9 | |
"TRF" Member
Join Date: Jul 2016
Location: Michigan
Posts: 4,583
|
Quote:
Seriously, this is a task best done at home by yourself. Nobody else cares about your watch as much. Proper screwdriver, lecture, lighted magnifier. Sent from my SM-G950U using Tapatalk |
|
6 April 2019, 03:06 PM | #10 |
"TRF" Member
Join Date: Apr 2010
Location: Earth
Posts: 2,406
|
I've had 15+ Rolex watches in my life, I size my own watched and never used loctite, never had any issues.
Have I been lucky or us wis are too obsessive about this topic?
__________________
5230G / 5146G / 124060 / BB58 / '59 Constellation |
6 April 2019, 03:10 PM | #11 |
"TRF" Member
Join Date: Nov 2009
Real Name: Andreas
Location: Margaritaville
Watch: Smurf
Posts: 19,879
|
Same here. But it happens.
__________________
Yeah, well, you know, that's just, like, your opinion, man. |
6 April 2019, 04:04 PM | #12 |
Banned
Join Date: Jul 2011
Location: Oregon
Posts: 5,150
|
I don't use Loctite. I do periodically check the tightness of the screws. Never had a problem. That said, a couple days after I first had the bracelet sized, one of the screws did start to work loose. Luckily, I discovered it before it came out completely. After I tightened it down, the situation has not repeated. I suspect the watchmaker just wasn't as careful as he needed to be, and I suspect OP's mishap is due to the same reason. Loctite might result in added assurance, but I don't think it's strictly necessary if the OP checks the screws from time to time.
|
7 April 2019, 01:36 AM | #13 |
"TRF" Member
Join Date: Apr 2009
Location: USA
Posts: 96
|
It has happened to me, too, but only with the newer, solid link bracelets. For whatever reason the screws can and will back out if no Loctite is applied.
|
6 April 2019, 03:09 PM | #14 |
Banned
Join Date: May 2007
Location: ASK
Watch: SubC.5711.D500
Posts: 2,236
|
Never had that issue.
Hope you get it sorted out soon. Lucky you, it landed on the carpet. Sent from my iPhone using Tapatalk |
6 April 2019, 03:10 PM | #15 |
"TRF" Member
Join Date: Mar 2019
Location: North America
Watch: 116710 BLNR
Posts: 165
|
Thanks for the suggestion guys. I’m fairly rattled. This past weekend I decided to leave my watch at home for a Vegas weekend trip - just had a funny feeling that “you never know”. Would’ve never thought the pin would come out after 8 wears and with the state I was in during the weekend and crowded locations - it probably would have been as good as gone.
Has this happened to anybody else? |
6 April 2019, 04:02 PM | #16 |
"TRF" Member
Join Date: Apr 2019
Real Name: RD
Location: UK
Posts: 629
|
As mentioned already, there was probably no loctite used
Sent from my iPhone using Tapatalk |
6 April 2019, 04:12 PM | #17 |
2024 ROLEX DATEJUST41 Pledge Member
Join Date: Jul 2016
Location: Australia
Watch: @ kostastimepieces
Posts: 5,266
|
I’ve had a screw start unscrewing on one of my stainless pieces , why wouldn’t rolex issue a @use loctite” instruction if this is even a remote possibility
|
6 April 2019, 04:49 PM | #18 |
"TRF" Member
Join Date: Jun 2015
Location: Houston TX
Posts: 1,328
|
|
6 April 2019, 05:29 PM | #19 |
"TRF" Member
Join Date: Mar 2010
Location: michigan
Posts: 193
|
I'm going to go through checking the watches I have as soon as the proper size tool I ordered comes in. Do they use normal blue Loctite?
EDIT - it appears they use 222 or purple. Thanks for the tips everyone. |
6 April 2019, 11:15 PM | #20 |
"TRF" Member
Join Date: May 2011
Real Name: Rob
Location: NCR
Watch: Out for that tree!
Posts: 285
|
I also don’t use loctite, but as an alternative you could just use clear nail polish. It works just as well, and I’m sure your significant other has some in her drawer. Just like loctite, you just need a touch.
__________________
"The body will never go where the mind has never been" Rolex SD 126600, Seiko Golden Tuna SBBN 040, PAM 579, JLC Master Compressor Diving Chrono GMT NS in Yellow, DSSD, Sinn U1000S, Doxa T-Graph, Doxa 750 Caribbean, PAM 190 "8-Days", PAM 162,TT DJ (Left to me by Dad) |
7 April 2019, 01:13 AM | #21 | |
"TRF" Member
Join Date: Jan 2011
Real Name: gus
Location: East Coast
Watch: APK & sometimes Y
Posts: 26,286
|
Quote:
Hollow ground screwdriver. Tip does not come to a point, it is flattened and as a result wider. When inserted in the slot there is less wiggle room and less slippage. With the right tools the job becomes very easy and less prone to the lackluster service from the cavemen at the AD. If DIY, do one link at a time. Be sure to use the screw that was matched to that link and especially sure to keep the links in their original order. All links are not created equal and changing the order can cause binding or stiffness between mismatched links.
__________________
|
|
6 April 2019, 10:20 PM | #22 |
2024 Pledge Member
Join Date: Dec 2018
Real Name: Frank
Location: Dallas,NY,Colo.
Watch: Patek 5168, 5170P
Posts: 2,518
|
When using Loctite, be sure to use numbers 221 or 222, the purple Loctite. It holds tight but it is much easier to remove it than the blue, number 242. Also, when applying it use something like a toothpick to apply it to the threads in the link rather than smearing it on the pin itself. That also will make it easier to remove. Good luck.
|
6 April 2019, 10:42 PM | #23 | |
"TRF" Member
Join Date: Jan 2019
Real Name: Ernie
Location: Los Angeles
Watch: Rolex Submariner
Posts: 271
|
Quote:
Was just going to ask what type is best. TY.
__________________
|
|
6 April 2019, 10:54 PM | #24 |
"TRF" Member
Join Date: Oct 2008
Location: Tejas
Watch: Various
Posts: 5,082
|
Do yourself a favor and get a set of nice screwdrivers. German or Swiss. And some blue loctite.
And why was the sound of the watch hitting the floor "familiar" |
6 April 2019, 11:21 PM | #25 |
"TRF" Member
Join Date: May 2011
Real Name: Rob
Location: NCR
Watch: Out for that tree!
Posts: 285
|
OP, don’t take it to the AD, just do it yourself. That way you know it’s done correctly.
IIRC, all you need is a 1.6mm Bergeon style screwdriver. If you’re really worried about scratching your bracelet, just put a small piece of clear tape over the screw and the screwdriver will cut through the tape allowing you to tighten down the screw but protect everything else around the area.
__________________
"The body will never go where the mind has never been" Rolex SD 126600, Seiko Golden Tuna SBBN 040, PAM 579, JLC Master Compressor Diving Chrono GMT NS in Yellow, DSSD, Sinn U1000S, Doxa T-Graph, Doxa 750 Caribbean, PAM 190 "8-Days", PAM 162,TT DJ (Left to me by Dad) |
7 April 2019, 04:56 AM | #26 | |
"TRF" Member
Join Date: May 2018
Location: Tulsa
Posts: 269
|
Quote:
https://thewatchprince.com/1-60-scre...erai-flat-tip/ |
|
7 April 2019, 12:49 AM | #27 |
Banned
Join Date: Jul 2017
Real Name: Jaime
Location: Here
Posts: 5,606
|
If you clean your watch on a regular basis, when drying it just inspect all the bracelet pin heads that they are flush and not sticking out. Very simple to do and takes little time. An ounce of prevention is worth a pound of cure.
|
7 April 2019, 01:01 AM | #28 |
"TRF" Member
Join Date: May 2018
Location: CA
Posts: 2,549
|
Wow, pretty scary alright! I'm glad to hear that it fell onto the carpet and there was no loss or damage. I've heard other stories of screws loosening up. Every time I put my watch on, I take a quick look to see if any of them are backing out. Definitely get yourself a nice set of screwdrivers as others have also recommended.
|
7 April 2019, 01:29 AM | #29 |
2024 Pledge Member
Join Date: May 2015
Real Name: Mike
Location: Pacific Northwest
Watch: 116610LV 16710 SD
Posts: 10,650
|
I personally don't like or use Loctite. I look at my watches and check the pins on a regular basis, never had a problem
|
7 April 2019, 01:29 AM | #30 |
"TRF" Member
Join Date: Mar 2019
Location: North America
Watch: 116710 BLNR
Posts: 165
|
Thanks all! I really appreciate it. Will look into a proper tool and take periodic safety measures.
While I’m at it (and going to the AD in the meantime) - when it was sized I have four links on one side of the bracelet and 7 on the other side. Is this common? I would have anticipated 5 and 6 respectively but maybe this was done to mitigate the effects of desk diving? |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.