![]() |
ROLEXROLEXROLEXROLEXROLEXROLEX
ROLEXROLEXROLEXROLEXROLEXROLEX
|
![]() |
#1 |
"TRF" Member
Join Date: Sep 2021
Location: Indonesia
Posts: 51
|
1967/68 Rolex 1675 MK 1 Fuchsia insert - opinion on dial
Hi thanks for accepting me as the forum member. I am very new to vintage watch collecting. I just purchase my very first vintage Rolex 1675 that comes complete with box and paper, which I am really2 happy about it. However since I am new I have few question that I would like to ask to this forum member.
The biggest question is my hour marker still glows strong so I assume it has been relume, however I just had the movement service and the service guy said is not relume and this could be a service dial. However I have not seen a single MK 1 service dial. I also read few website that during 67/68 the marker was treated with zinc sulfide/tritium but is it possible to still glow bright? called a day glow dial but it say it last few seconds mine last for around 2- 3 minutes if I put it under intense light and then turn off the light. The marker looks still puffy correct period as the 67/68 So my question is my dial a service dial? Or it is not service dial and been relume or it is period correct and possibility still glows strong? I have attach few pictures and video under UV. the video is film under UV The watch is serial number 175xxxx match with the guarantee and cosc paper dated 1968 Case back stamp II.67 Insert fuchsia faded Bracelet is not correct so if anyone is selling 7206 or the 6251 jubillee please dm me. I am interested to purchase Thanks for the help |
![]() |
![]() |
![]() |
#2 |
"TRF" Member
Join Date: Oct 2017
Location: East coast
Posts: 6,647
|
It looks like an original mark 1 dial to me……so when it exposed to sun and put in a dark room the dial glows? I’ve had 3 mark 1 and they are all dead(no glow) all the hands are super minty for the age….must have spent a lot of time in a safe(but bezel has a lot of fade??)…..and never polished..wow
|
![]() |
![]() |
![]() |
#3 |
"TRF" Member
Join Date: Sep 2021
Location: Indonesia
Posts: 51
|
Thanks
Yes thats why i was wandering why the lume is still strong if you see the video, i just had it service the movement. All the punch paper match with the case number. I just need second opinion. Im really happy to get the watch. But do you think its been relume? The service guy here in indonesia said it could be service dial but i never come across any mark 1 service dial.
Cheers |
![]() |
![]() |
![]() |
#4 |
2024 Pledge Member
Join Date: Jan 2009
Real Name: Aaron
Location: CT/NYC
Watch: ing the time!
Posts: 6,902
|
Maybe the watch was worn a lot for the first 20 years of its life, fading the insert, and then put away for the next 30 years, preserving the condition of the dial/case.
|
![]() |
![]() |
![]() |
#5 |
"TRF" Member
Join Date: Sep 2021
Location: Indonesia
Posts: 51
|
I attach more picture. I put in uv box and after uv box on dark room. Please comment.
|
![]() |
![]() |
![]() |
#6 |
"TRF" Member
Join Date: Sep 2021
Location: Indonesia
Posts: 51
|
I read that 67/68 it use zinc sulfide but i dont know how it suppose to br
|
![]() |
![]() |
![]() |
#7 |
"TRF" Member
Join Date: May 2006
Location: Seattle, WA, USA
Watch: 2005 16610
Posts: 15
|
That is a really illuminated dial. How does it last for so many years?
|
![]() |
![]() |
![]() |
#8 |
2024 Pledge Member
Join Date: Aug 2013
Location: The Empire State
Watch: Many
Posts: 3,446
|
|
![]() |
![]() |
![]() |
#9 |
"TRF" Member
Join Date: Sep 2021
Location: Indonesia
Posts: 51
|
Im really confuse because as i am aware there is none mark 1 service dial. But does it look relume or it is the transitional dial between gilt and matte and is it possible for the serial number.
|
![]() |
![]() |
![]() |
#10 |
2024 Pledge Member
Join Date: Oct 2018
Location: Colorado, USA
Posts: 6,110
|
In my experience, 1960s zinc sulfide phosphor can glow visibly for a minute or two after UV excitation. Of course, it is gradually getting dimmer over that time.
__________________
@oldwatchdan on IG |
![]() |
![]() |
![]() |
#11 |
"TRF" Member
Join Date: Sep 2021
Location: Indonesia
Posts: 51
|
|
![]() |
![]() |
![]() |
#13 |
"TRF" Member
Join Date: Sep 2021
Location: Indonesia
Posts: 51
|
|
![]() |
![]() |
![]() |
#15 |
"TRF" Member
Join Date: Nov 2018
Location: UK
Watch: DRSD
Posts: 12
|
My Long E mark 1 doesn't glow when exposed to the sun - but it does react to UV. OP's one looks remarkably bright however..
|
![]() |
![]() |
![]() |
#16 |
"TRF" Member
Join Date: Jan 2019
Real Name: Jim
Location: miami
Watch: GMT II 16760
Posts: 1,676
|
Beautiful watch, insert is killer. See my thread regarding the lume on my 5513. Looks exactly like yours under UV light and reacts exactly the same afterwards. Also does not seem to react much from direct sunlight. So you have a zinc sulfide dial. Your handset glows a different color so those look relumed to me. But the dial is in amazing condition, if that is relumed whoever did it is a master craftsman. I’m sure you’ll get more of the Eagle eyed experts around here to chime in but so far from what I’ve read so far they think it’s good which should be reassuring.
Sent from my iPhone using Tapatalk |
![]() |
![]() |
![]() |
#17 | |
"TRF" Member
Join Date: Sep 2021
Location: Indonesia
Posts: 51
|
Quote:
|
|
![]() |
![]() |
![]() |
#18 | |
"TRF" Member
Join Date: Sep 2021
Location: Indonesia
Posts: 51
|
Quote:
Cheers |
|
![]() |
![]() |
![]() |
#19 |
"TRF" Member
Join Date: Jan 2019
Real Name: Jim
Location: miami
Watch: GMT II 16760
Posts: 1,676
|
|
![]() |
![]() |
![]() |
#20 |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: Apr 2008
Real Name: jP
Location: Texas
Watch: GMT-MASTER
Posts: 17,206
|
There is no Mark I service dial, whether tritium or luminova, that has the same appearance as a Mark I dial. In the past, before there were service dials for the GMT 1675, you would find Mark V or Mark VI dials used as service dials on the early white-lettered Mark I watches and possibly the Mark II or Mark IV dials.
Later, service dials went into production for the GMT 1675s with the original dials identified as: 1) the first variation of service dial had tritium markers with SWISS-T<25 printed at the bottom of the dial 2) the next service dial variation had luminova markers and was also marked SWISS-T<25 3) the third variation of the GMT 1675 service dials looked in appearance as the other two service dials and luminova markers but was marked "SWISS" at the bottom of the dial. (Referred to as the superluminova dial) No matter which service dial was used on these GMT 1675s, all three have the same appearance as found in the dial photos below. The coronets on these service dials appear somewhat similar to the original Mark I dials, but upon closer scrutiny, the differences are apparent.
__________________
Member of NAWCC since 1990. INSTAGRAM USER NAME: SPRINGERJFP Visit my Instagram page to view some of the finest vintage GMTs anywhere - as well as other vintage classics. |
![]() |
![]() |
![]() |
#21 | |
"TRF" Member
Join Date: Sep 2021
Location: Indonesia
Posts: 51
|
Quote:
Thanks |
|
![]() |
![]() |
![]() |
#22 | |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: Apr 2008
Real Name: jP
Location: Texas
Watch: GMT-MASTER
Posts: 17,206
|
Quote:
The odd color of the markers when exposed to the UV light is based on your light. Not all UV lights project the same color UV. I've seen some UV lights used on vintage dials make the dial markers on a particulate watch look white while another UV light projected on the same dial would give the markers a light green or blue tint. The markers on the pre 1967 dials, and some from 1968 too, normally glow green under a UV light with the glow lasting several seconds to a minute or so. Also, based on my experience, these dials that glow green under UV light have a glitter or sparkle effect within the markers when excited by UV light and observed under magnification while the UV light is on the markers.
__________________
Member of NAWCC since 1990. INSTAGRAM USER NAME: SPRINGERJFP Visit my Instagram page to view some of the finest vintage GMTs anywhere - as well as other vintage classics. |
|
![]() |
![]() |
![]() |
#23 | |
"TRF" Member
Join Date: Sep 2021
Location: Indonesia
Posts: 51
|
Quote:
Thanks springer, i saw few thread and some within close to my serial number. Some people said to me its definetly relume. But i saw some it said dayglow. Mine lasted to completely dead is 3 min 49 second when i exposed to intense light.. i hope its the right dial. I have attach video also. But the dials look correct right? How about the other like insert and case ? So this is not relimed dial? |
|
![]() |
![]() |
![]() |
#24 | |
"TRF" Member
Join Date: Sep 2021
Location: Indonesia
Posts: 51
|
Quote:
Would you say this is the correct period dial with the srial number for zinc sulfide/tritium? Base on the lume when active and the dial picture when the lume is inacrive. Cheers |
|
![]() |
![]() |
![]() |
#25 | |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: Apr 2008
Real Name: jP
Location: Texas
Watch: GMT-MASTER
Posts: 17,206
|
Quote:
I have a suggestion for you. Try this. Hire a consultant or find an expert close to you that can help you out by examining the watch in person. In person exams by someone knowledgeable who can address your concerns always works quite well for most. The other option is returning the watch. You seem to have a lot of concerns about this watch so maybe you might just need to do a return and find a GMT from someone reputable that you trust.
__________________
Member of NAWCC since 1990. INSTAGRAM USER NAME: SPRINGERJFP Visit my Instagram page to view some of the finest vintage GMTs anywhere - as well as other vintage classics. |
|
![]() |
![]() |
![]() |
#26 |
"TRF" Member
Join Date: Sep 2021
Location: Indonesia
Posts: 51
|
After 1-2 minites it becomes like thsi
|
![]() |
![]() |
![]() |
#27 |
"TRF" Member
Join Date: Nov 2020
Location: USA
Watch: Rolex
Posts: 135
|
I had a zinc sulfide dial mk1 and this seems the same. It's a beautiful watch and the complete makes it even better. Congrats
|
![]() |
![]() |
![]() |
#28 |
"TRF" Member
Join Date: Sep 2021
Location: Indonesia
Posts: 51
|
|
![]() |
![]() |
![]() |
#29 |
"TRF" Member
Join Date: Sep 2021
Location: Indonesia
Posts: 51
|
|
![]() |
![]() |
![]() |
#30 |
"TRF" Member
Join Date: Sep 2021
Location: Indonesia
Posts: 51
|
Hi
I just realise that if you come from bright place to dark place or room it does not glow. Only when it is under direct light that it will glows in dark room. So i am sure its the right dial. Thanks for the help |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.