ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
4 May 2016, 03:41 PM | #1 |
Banned
Join Date: Mar 2016
Location: NYC
Posts: 1,231
|
New To The President Bracelet - Do These Endlinks Look Right To You?
Just got home from Hong Kong with my newly acquired 1601 YG Datejust with Slate Grey dial, just put her on my vintage President bracelet which I obtained years ago and never wore, just never had the right YG watch for it. I've got 9 other Rolexes and none of them behave the way this President is, not sure if it's because I'm not used to how a President sits or if perhaps I've got the wrong endpieces. Two questions please: 1. The polished center links in the endpiece stick up a few millimeters on the endpiece itself. This is contrary to the rest of the bracelet whose polished center links are at the same height of the brushed side links. Is this correct? 2. As a result of this, the first row of 'real' links coming off the endpieces rise above the falling curve of the endpieces. Is this right? I ask because on all my Oyster/Jubilee bracelets there is a continuous flow of height from the endpiece to the start of the bracelet and on my President the opposite is happening, there seems to be a disconnect between the design of the endpiece and the design of the bracelet. I've tried to post pictures that show this, if anyone can chime in please let me know. If this is natural President bracelet/endpiece design I'll get used to it but its foreign to what I'm used to in all the other Rolex bracelets I've experienced. The first photo shows it best, the first row of real links on the bracelet sit higher than the endpiece. Is this how the President sits on the wrist? TIA |
4 May 2016, 05:05 PM | #2 |
"TRF" Member
Join Date: Jul 2013
Real Name: Sam
Location: los Angeles
Posts: 2,051
|
Hm. I don't like the look of the whole bracelet. Could u show the stampings on the clasp and also inside the end links? I'm sure we could give better assessment.
I blame it on the autoconnect. |
4 May 2016, 08:06 PM | #3 |
"TRF" Member
Join Date: Jan 2011
Real Name: David
Location: australia
Posts: 20,197
|
Show us the marks kings it does not look right
Sent from my iPhone using Tapatalk
__________________
watches many |
4 May 2016, 08:21 PM | #4 | ||
Banned
Join Date: Mar 2016
Location: NYC
Posts: 1,231
|
Quote:
Quote:
More views, thanks guys. |
||
4 May 2016, 08:58 PM | #5 |
"TRF" Member
Join Date: Jun 2008
Real Name: Yes, it is !
Location: Cheshire & Mersey
Watch: Military issue Sub
Posts: 1,330
|
It is not correct.
Where did you buy it? Sorry to bear bad news. Haywood
__________________
*Comex:5513,5514,1665x2,16800x2,16600 *Mil sub:5517x2,5513x9,5512 *Submariner:6536/1x2,5508,5513 PCG u/line & double SWISS (America's Cup),5513 giltx2, 5513 m-firstx2,5513 gloss WGx2,1680 Red,1680 White Mk1 & Mk2 *Sea-Dweller:1665 DRSDx3,Great Whitex3 *GMT-Master:6542x2 (1 Bakelite),1675x8 (2 gilt), 16750 & SeaKing 116710LN *Explorer:1016x6 (1 gilt),5500x3,14270 Blackout, Orange 1655 x4 *Milgauss 1019x3 *Cosmo 6263 *RNCD DSSD 116660. |
4 May 2016, 08:58 PM | #6 |
"TRF" Member
Join Date: Jan 2011
Real Name: David
Location: australia
Posts: 20,197
|
Your band is fake sorry
Sent from my iPhone using Tapatalk
__________________
watches many |
4 May 2016, 09:07 PM | #7 |
Banned
Join Date: Mar 2016
Location: NYC
Posts: 1,231
|
Wow, that would be disappointing. I bought it on eBay back in 2005 and it was all stretched and Michael Young did a restoration. I don't think he would restore a fake bracelet, so this is confusing. You positive it's a fake? I can live with being ripped off on eBay after all these years but the MY part doesn't add up.
|
4 May 2016, 09:22 PM | #8 |
"TRF" Member
Join Date: Jun 2008
Real Name: Yes, it is !
Location: Cheshire & Mersey
Watch: Military issue Sub
Posts: 1,330
|
Hmmm.....that incorrect Rolex logo (no "over and under" for a start), that clumsy cartoon of Donald Trump instead of Minerva's head in subtle relief, those Royal Opera House end-links, that 750 by potato printing and those main runs of links that do not appear to be consistent nor the correct scale / shape.
Haywood
__________________
*Comex:5513,5514,1665x2,16800x2,16600 *Mil sub:5517x2,5513x9,5512 *Submariner:6536/1x2,5508,5513 PCG u/line & double SWISS (America's Cup),5513 giltx2, 5513 m-firstx2,5513 gloss WGx2,1680 Red,1680 White Mk1 & Mk2 *Sea-Dweller:1665 DRSDx3,Great Whitex3 *GMT-Master:6542x2 (1 Bakelite),1675x8 (2 gilt), 16750 & SeaKing 116710LN *Explorer:1016x6 (1 gilt),5500x3,14270 Blackout, Orange 1655 x4 *Milgauss 1019x3 *Cosmo 6263 *RNCD DSSD 116660. |
4 May 2016, 09:30 PM | #9 | |
Banned
Join Date: Mar 2016
Location: NYC
Posts: 1,231
|
Quote:
What options do I have in solid gold besides the President style circa 1970? Did they make an Oyster or Jubilee or do I need to seek out another (this time authentic) President? |
|
4 May 2016, 09:54 PM | #10 | |
"TRF" Member
Join Date: Sep 2012
Location: Japan
Posts: 4,361
|
Quote:
These originally came on a President or on leather, so you could choose either or both. Aftermarket Presidents aren't considered acceptable, but aftermarket leather is, so your options in this regard are countless. Good luck with your choice. |
|
4 May 2016, 10:18 PM | #11 |
2024 Pledge Member
Join Date: Oct 2013
Real Name: Avery W Wood
Location: Norcross, GA
Posts: 273
|
Wow. Sorry to hear that.
I hope it is at least real 18k gold. Could still get some good scrap value out of it... |
4 May 2016, 10:28 PM | #12 | |
"TRF" Member
Join Date: Jun 2008
Real Name: Yes, it is !
Location: Cheshire & Mersey
Watch: Military issue Sub
Posts: 1,330
|
Quote:
Haywood M
__________________
*Comex:5513,5514,1665x2,16800x2,16600 *Mil sub:5517x2,5513x9,5512 *Submariner:6536/1x2,5508,5513 PCG u/line & double SWISS (America's Cup),5513 giltx2, 5513 m-firstx2,5513 gloss WGx2,1680 Red,1680 White Mk1 & Mk2 *Sea-Dweller:1665 DRSDx3,Great Whitex3 *GMT-Master:6542x2 (1 Bakelite),1675x8 (2 gilt), 16750 & SeaKing 116710LN *Explorer:1016x6 (1 gilt),5500x3,14270 Blackout, Orange 1655 x4 *Milgauss 1019x3 *Cosmo 6263 *RNCD DSSD 116660. |
|
4 May 2016, 11:30 PM | #13 |
"TRF" Member
Join Date: Jan 2011
Real Name: David
Location: australia
Posts: 20,197
|
Quote:
Lol. I was trying to be more subtle but what you state is true. Cheers. Likely made in Hong Kong I can almost name the maker but I won't.
__________________
watches many |
4 May 2016, 11:55 PM | #14 |
TRF Moderator & 2024 SUBMARINER Patron
Join Date: Jul 2013
Real Name: Adam
Location: Far East
Watch: Golden Tuna
Posts: 28,676
|
That's surprising that MY didn't say anything.
|
4 May 2016, 11:57 PM | #15 | |
Banned
Join Date: Mar 2016
Location: NYC
Posts: 1,231
|
Quote:
That said, I don't know why Michael Young would have reconditioned this bracelet for good money back then and wouldn't have told me it was a fake at the time. That's the only part that's upsetting me now actually. |
|
5 May 2016, 01:14 AM | #16 | |
Banned
Join Date: Nov 2010
Location: Kingstown
Posts: 58,279
|
Quote:
|
|
5 May 2016, 02:24 AM | #17 |
"TRF" Member
Join Date: Dec 2005
Posts: 3,670
|
I have same feeling
MY at least should notify before repair it.
__________________
Watching date changes every midnight |
5 May 2016, 05:37 AM | #18 |
"TRF" Member
Join Date: Sep 2012
Location: Japan
Posts: 4,361
|
|
5 May 2016, 06:00 AM | #19 |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: May 2011
Location: Great State of TX
Posts: 5,743
|
I've used him several times and am somewhat conflicted about this issue. He should have known back then (or at least now should know) what's real and what's not. Now, the next question is should he provide an evaluation if not prompted to do so?
If he's not asked directly, is it possible to think that he assumes his customers know what they own (especially if they don't ask for an authenticity check)? Maybe he feels it rude to point out that a customer's piece is fake if they don't ask (could be a cultural thing, for all I know). For example, my grandfather ("GF") leaves me a beautiful bubble back with a worn out, fake bracelet. I want the bracelet restored so that I can wear my GF's piece again just like he did. I don't care that it's fake because the value to me is in the memories of my GF's love for his watch; my only care is that it's functional while retaining the charm my GF gave it. Seems reasonable to me? On the same token, I wouldn't be insulted if MY told me it was fake just as a "FYI", but maybe someone else would get insulted? I don't know, just putting out possibilities. Note: I'm curious to hear from someone from/around this culture as to the validity of any cultural norm argument to be made here (I'm looking to you, Adam ).
__________________
Forty six & 2 are just ahead of me. Follow me on Instagram @ccrolex |
5 May 2016, 08:31 AM | #20 |
TRF Moderator & 2024 SUBMARINER Patron
Join Date: Jul 2013
Real Name: Adam
Location: Far East
Watch: Golden Tuna
Posts: 28,676
|
Did MY fix it with 18k gold pins?
|
5 May 2016, 09:35 AM | #21 |
Banned
Join Date: Mar 2016
Location: NYC
Posts: 1,231
|
|
5 May 2016, 11:31 AM | #22 | |
TRF Moderator & 2024 SUBMARINER Patron
Join Date: Jul 2013
Real Name: Adam
Location: Far East
Watch: Golden Tuna
Posts: 28,676
|
Quote:
|
|
5 May 2016, 05:19 PM | #23 |
"TRF" Member
Join Date: Dec 2009
Location: London
Posts: 2,081
|
MY isn't an AD or Rolex authorised repair agent, you send him stuff, he fixes it up, don't see any reason he'd feel he'd have to critically inspect parts as to their authenticity.
|
5 May 2016, 05:39 PM | #24 |
"TRF" Member
Join Date: Jun 2014
Location: Los Angeles, CA
Posts: 266
|
Getting back to the bracelet, the positioning of the 8385 is incorrect.
|
5 May 2016, 05:50 PM | #25 | |
"TRF" Member
Join Date: Jun 2008
Real Name: Yes, it is !
Location: Cheshire & Mersey
Watch: Military issue Sub
Posts: 1,330
|
Quote:
H
__________________
*Comex:5513,5514,1665x2,16800x2,16600 *Mil sub:5517x2,5513x9,5512 *Submariner:6536/1x2,5508,5513 PCG u/line & double SWISS (America's Cup),5513 giltx2, 5513 m-firstx2,5513 gloss WGx2,1680 Red,1680 White Mk1 & Mk2 *Sea-Dweller:1665 DRSDx3,Great Whitex3 *GMT-Master:6542x2 (1 Bakelite),1675x8 (2 gilt), 16750 & SeaKing 116710LN *Explorer:1016x6 (1 gilt),5500x3,14270 Blackout, Orange 1655 x4 *Milgauss 1019x3 *Cosmo 6263 *RNCD DSSD 116660. |
|
6 May 2016, 09:24 AM | #26 |
"TRF" Member
Join Date: Jun 2015
Real Name: Mark
Location: Washington State
Watch: SUBS and GMT's!
Posts: 9,664
|
Sorry to hear about this. Put that baby back on a strap. I really, really like this reference with the grey dial in YG. What a great combination. After you posted pictures of it, I was looking all over the web for one...
I have used MY many times and have always been pleased with his work and service. |
6 May 2016, 03:15 PM | #27 | |
Banned
Join Date: Mar 2016
Location: NYC
Posts: 1,231
|
Quote:
So until I can figure out my next move on either spending big $ on a period gold bracelet or selling the watch and ending the gold experience.... Is it completely against the rules to ask advice on an aftermarket gold bracelet to tide me over for a few weeks to decide? Am I allowed to ask for recommendations on near-perfect representations of gold Oysters, Jubilees, and Presidents? I don't want to go to forum jail or have others think less of me, but I can't enjoy my new 1601 on leather and I need some time with a gold bracelet to see if I really love the look before committing to tracking down an authentic. The one I have now is a joke and a reminder of a mistake. Are there high-quality reproductions that I can use for awhile and then make a decision? I've seen some online, I think Hadley Roma even makes some, anyone play with these for a few weeks perhaps when their bracelet was in the shop? |
|
6 May 2016, 03:25 PM | #28 |
"TRF" Member
Join Date: Jul 2013
Real Name: Sam
Location: los Angeles
Posts: 2,051
|
Personally I think the bracelet makes the president watch. Don't give up. Just to satisfy ur itch, find an aftermarket one on eBay n use it temporarily until u find the real deal. Here is my OP with aftermarket bracelet. We don't encourage it here but hey it's ur watch.
I blame it on the autoconnect. |
6 May 2016, 03:47 PM | #29 | |
Banned
Join Date: Mar 2016
Location: NYC
Posts: 1,231
|
Quote:
Thanks omito, that's a relief. I know here at TRF it is all about authenticity and all of my Rolexes are spot-on in that regard (proof above, not necessary perhaps but I feel compelled) except for this bracelet mess which I thought I was covered on a decade ago. Are there any aftermarket brands that are better than the rest? If I'm going to spend $100+ on a gold Oyster, Jubilee, or President bracelet reproduction and want to live with it for a few weeks, I want it to look as correct as possible. |
|
6 May 2016, 05:32 PM | #30 |
"TRF" Member
Join Date: Jul 2013
Real Name: Sam
Location: los Angeles
Posts: 2,051
|
PM sent.
I blame it on the autoconnect. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.