ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

ddnyc77 · 16 January 2011, 02:54 AM

I have a Z Serial 14060M and a D Serial LV/. The LV just came back from RSC service. Here is the question, when the crown is unscrewed and turned backwards (ie counter clockwise) there is a clicking sound on the 14060M and no sound on the LV.

What is going on here, any thoughts would be appreciated.

Chris3 · 16 January 2011, 04:26 PM

Not sure about the 16610, but my 14060M definitely clicks when wound anti-clockwise in the manual wind position.

onryo · 29 January 2011, 05:17 PM

Not a Sub, but my 16710 (GMT II) doesn't click when the crown is turned counterclockwise in the winding position. My Seamaster however has more of a ratcheting sound to it, subtle click counterclockwise and the winding 'grind' when turned clockwise. Interesting...

beebleb · 25 March 2011, 04:44 PM

I hear clicking on my 14060 too.

poppyoua12 · 9 April 2011, 06:18 AM

I use to have a 14060M M serial when you tried to set time and go counterclockwise it seemed to not want to go that way like the gears were binding it would move that way just hard I just thought because it was new.

16 January 2011, 02:54 AM	#1
ddnyc77 Member Join Date: Dec 2009 Location: nyc Posts: 425	LV and 14060M I have a Z Serial 14060M and a D Serial LV/. The LV just came back from RSC service. Here is the question, when the crown is unscrewed and turned backwards (ie counter clockwise) there is a clicking sound on the 14060M and no sound on the LV. What is going on here, any thoughts would be appreciated.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

16 January 2011, 04:26 PM	#2
Chris3 Member Join Date: May 2009 Location: Australia Posts: 23	Not sure about the 16610, but my 14060M definitely clicks when wound anti-clockwise in the manual wind position.

29 January 2011, 05:17 PM	#3
onryo Member Join Date: Dec 2010 Location: Seattle Watch: GMT-Master II Posts: 410	Not a Sub, but my 16710 (GMT II) doesn't click when the crown is turned counterclockwise in the winding position. My Seamaster however has more of a ratcheting sound to it, subtle click counterclockwise and the winding 'grind' when turned clockwise. Interesting...

25 March 2011, 04:44 PM	#4
beebleb "TRF" Member Join Date: Oct 2009 Location: Australia Posts: 42	I hear clicking on my 14060 too.

9 April 2011, 06:18 AM	#5
poppyoua12 2024 ROLEX SUBMARINER 41 Pledge Member Join Date: Mar 2009 Real Name: Justen Location: detroit Watch: 116610 Submariner Posts: 180	I use to have a 14060M M serial when you tried to set time and go counterclockwise it seemed to not want to go that way like the gears were binding it would move that way just hard I just thought because it was new.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)