![]() |
ROLEXROLEXROLEXROLEXROLEXROLEX
ROLEXROLEXROLEXROLEXROLEXROLEX
![]() |
#1 |
"TRF" Member
Join Date: Apr 2024
Location: New York
Posts: 1
|
Introduction--and jumping in right away!
Hello,
I am happy to introduce myself. I am a hobbyist for seevral years and have experience overhauling many brands. Recently I was working on a rolex 2135 with a broken jewel setting for the escape wheel on the plate side. I don't have a Seitz jeweling tool, but do have a good staking set. I sourced a new jewel setting which comes complete with shock protection within brass bushing. My question: Can I replace this with my staking set? I would think I push the old jewel; from inside out towards the dial side and do the reverse to put in the new jewel? Any suggestions to reduce the chance of mishap would be greatly appreciated. Regards, JC |
![]() |
![]() |
![]() |
#2 |
TechXpert
Join Date: May 2012
Location: Earth
Posts: 23,564
|
I'd recommend getting a Horia jewelling tool, or a chinese knock-off. It will make your life so much easier. I wouldn't attempt it with a staking tool.
Don't push it towards the dial side, push it from dial side towards the inside just like you'd do with a jewel in the mainplate, otherwise you'll wreck the mainplate. |
![]() |
![]() |
![]() |
#3 |
2024 Pledge Member
Join Date: Apr 2022
Real Name: Bazil Brush
Location: Star Gazing
Watch: Any Daytona
Posts: 3,186
|
Hi there …
__________________
![]() ![]() If you have no enemies, you have no character. Taking a stand always creates opposition. Paul Newman Being Serious = Onto the list you go ![]() ![]() |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.