![]() |
ROLEXROLEXROLEXROLEXROLEXROLEX
ROLEXROLEXROLEXROLEXROLEXROLEX
![]() |
#1 |
"TRF" Member
Join Date: Jul 2011
Real Name: Rob
Location: Boston, MA
Watch: 1530
Posts: 3,792
|
Every type of wood used for a Rolex dial
Rolex made a few types of wood dials over the years (5 that I know of), and here's my attempt to showcase them all. Thanks to Clay (miamiclay), David (crowncollection) and Bas (searchart) for all their helpful info in this thread.
The first wood dials appeared in the early 1970's on Day-Date 1800 series models. According to Amsterdam Watch Co, "wood dials in the 1803 reference Day-dates are extremely rare...In addition, these wood dials were unlacquered and very prone to cracking." Usually, dials for 1800 Day-Dates are "pie pan" dials with a step down around the minute track; that's not the case with these. While the wood type isn't known for sure, it's sometimes listed as sequoia: ![]() The straight-grain-maybe-sequoia dial was the only wood option on the 180x Day-Date, and the only wood dial Rolex ever made that wasn't burlwood. The burlwood dials began with the 18000 series of Day-Dates. Burlwood isn't a specific type of wood/tree; it refers to wood from burls (knots near the trunk) of any tree. The pattern of each burlwood dial is unique. Rolex used 4 kinds of burlwood: Birch: ![]() African mahogany: ![]() Walnut: ![]() Madrona (a.k.a. "madrone"): ![]() Madrona may have replaced mahogany in the 1980's. Mahogany, birch, and walnut are all known to be mentioned in official Rolex catalogs but this ad only mentions madrona, birch, and walnut. According to Bas, those three are all still available from RSC, so Rolex likely ran out of mahogany at some point. I've seen a couple Rolexes listed with supposed "oak dials" but I think it's likely those are actually walnut or mahogany. If you ever see a "briar root" dial, it's probably just a birch dial that's mis-labeled. Vilicich Watch asserts that this pressed wood dial is original but I think it's likely aftermarket: ![]() Some collectors are under the impression that wood dials ended in the 1980's, but this catalog pic proves that the final wood dial, walnut, lasted into the early 2000's: ![]() If I've gotten any of this wrong or forgotten any kinds of wood dials, please let me know. ![]() |
![]() |
![]() |
![]() |
#2 |
TechXpert
Join Date: May 2012
Location: Earth
Posts: 23,564
|
![]() ![]() |
![]() |
![]() |
![]() |
#3 |
"TRF" Member
Join Date: Oct 2014
Location: san francisco
Posts: 472
|
Oak
![]() ![]() Last edited by chocopeluche; 7 July 2020 at 04:48 PM.. Reason: add second image |
![]() |
![]() |
![]() |
#4 |
"TRF" Member
Join Date: Oct 2014
Location: san francisco
Posts: 472
|
also, thank you for this thread ... wood w/ yellow gold is my favorite dial combination by far.
|
![]() |
![]() |
![]() |
#5 |
"TRF" Member
Join Date: Jul 2011
Real Name: Rob
Location: Boston, MA
Watch: 1530
Posts: 3,792
|
|
![]() |
![]() |
![]() |
#6 |
"TRF" Member
Join Date: Oct 2014
Location: san francisco
Posts: 472
|
No, found it here - https://watch-fever.blogspot.com/201...e-ref.html?m=1
Sent from my iPhone using Tapatalk
__________________
Rolex OQ Fanatic SF, CA |
![]() |
![]() |
![]() |
#7 | |
"TRF" Member
Join Date: Jul 2011
Real Name: Rob
Location: Boston, MA
Watch: 1530
Posts: 3,792
|
Quote:
|
|
![]() |
![]() |
![]() |
#8 |
"TRF" Member
Join Date: Jan 2011
Real Name: David
Location: australia
Posts: 20,186
|
Great thread
![]() ![]() Sent from my iPhone using Tapatalk
__________________
watches many |
![]() |
![]() |
![]() |
#9 |
Banned
Join Date: May 2019
Location: USA
Posts: 106
|
This is so educating. Great thread and thanks for sharing.
|
![]() |
![]() |
![]() |
#10 |
"TRF" Member
Join Date: Jul 2011
Real Name: Rob
Location: Boston, MA
Watch: 1530
Posts: 3,792
|
|
![]() |
![]() |
![]() |
#11 |
2024 Pledge Member
Join Date: Apr 2019
Location: 33139/95460
Posts: 1,339
|
Thanks Rob, for yet another great public service thread!
Two minor wood-pedantry notes - Burls aren’t like knots. Knots are an internal indication of where there was once a tree branch, while burls are the roughly hemispherical ‘lumps’ which grow directly on tree trunks, often at the base. I’ll attach a pic below. “African mahogany” - Ummmmm ... yeah. Like “Bulgarian Champagne,” the name alone reveals the falsity. There are only two generally accepted “real” mahoganies - Cuban mahogany (swietenia mahagoni, the original, the good stuff) and Honduran or Bigleaf mahogany (swietenia macrophylla); both are native only to the West Indies and South FL. I think both types are now considered “commercially extinct” and are protected by the CITES treaties (like elephant ivory), which I expect was the reason for the change by Rolex. Beyond those, you do find “mahoganies” described as Philippine, African, Indonesian, etc., whose wood or burls may somewhat resemble real mahogany, but which may come from any species. NB - I am neither a botanist nor a dealer in tropical hardwoods, but the above is my understanding. Burls, in place on a tree trunk - . |
![]() |
![]() |
![]() |
#12 | |||
"TRF" Member
Join Date: Jul 2011
Real Name: Rob
Location: Boston, MA
Watch: 1530
Posts: 3,792
|
![]() Quote:
Quote:
Quote:
![]() |
|||
![]() |
![]() |
![]() |
#13 |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: Dec 2010
Real Name: PaulG
Location: Georgia
Posts: 41,439
|
Every type of wood used for a Rolex dial
Regarding the Amsterdam Watch Co statement about no lacquer on the wood - those slices of wood might have been shellacked or lightly oil-stained.
On painted metal, lacquer would be a typical clear coat - but wouldn’t be appropriate on wood. In the macro shots you can see that the surface wasn’t sealed well and the ink is missing in spots. Just a very difficult material to properly finish before printing. ![]() ![]() Sent from my iPhone using Tapatalk Pro
__________________
Does anyone really know what time it is? |
![]() |
![]() |
![]() |
#14 |
2024 Pledge Member
Join Date: Apr 2019
Location: 33139/95460
Posts: 1,339
|
I thought I’d add these pics of another seldom-seen 1803 straight grain (non-burl) wood dial I came across, this one with the Sigma markings.
. . |
![]() |
![]() |
![]() |
#15 |
"TRF" Member
Join Date: May 2016
Location: Sheffield
Posts: 11
|
This is an excellent post!! My brother has a wood-dial President that I've got to find and post.
|
![]() |
![]() |
![]() |
#16 |
2024 Pledge Member
Join Date: Apr 2019
Location: 33139/95460
Posts: 1,339
|
New-ish Hodinkee article on wood dials -
https://www.hodinkee.com/articles/a-...l-wooden-dials Although the article claims only 3 wood types for the 5-digit Rolex dials (birch, mahogany, walnut), our own powerfunk and others have confirmed at least one more, madrone, was also specified in Rolex ads. |
![]() |
![]() |
![]() |
#17 | |
"TRF" Member
Join Date: Jul 2011
Real Name: Rob
Location: Boston, MA
Watch: 1530
Posts: 3,792
|
Quote:
|
|
![]() |
![]() |
![]() |
#18 |
"TRF" Member
Join Date: Jul 2011
Real Name: Rob
Location: Boston, MA
Watch: 1530
Posts: 3,792
|
This is the first time I've seen this "multi-burlwood" dial. Looks like birch on the outside and a darker burlwood in the middle:
![]() |
![]() |
![]() |
![]() |
#19 |
"TRF" Member
Join Date: Jul 2018
Location: Washington, DC
Posts: 4
|
why do the dials say T swiss T when there is on lume?
|
![]() |
![]() |
![]() |
#20 |
"TRF" Member
Join Date: Jul 2011
Real Name: Rob
Location: Boston, MA
Watch: 1530
Posts: 3,792
|
|
![]() |
![]() |
![]() |
#21 |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: Jul 2013
Real Name: Brian (TBone)
Location: canada
Watch: es make me smile
Posts: 75,977
|
Great thread Rob, very informative.
I’m wondering if Rolex would be able to replace one of these with a service dial these days …? |
![]() |
![]() |
![]() |
#22 |
"TRF" Member
Join Date: Jul 2011
Real Name: Rob
Location: Boston, MA
Watch: 1530
Posts: 3,792
|
|
![]() |
![]() |
![]() |
#23 |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: Dec 2010
Real Name: PaulG
Location: Georgia
Posts: 41,439
|
I’d surmise that a “run of the mill” (if that is an acceptable term) Rolex with a damaged wood dial would have the option of replacement with a era & reference correct dial.
But a special Rolex (like the OQ with a birch/walnut dial pictured in an earlier post) would likely get appointed to the Restoration Atelier. If the dial needed attention, it would be either restored, or replaced by a duplicate dial made from scratch with period-correct materials and techniques. This, of course, would be a Rolex and customer negotiated price and process. Sent from my iPhone using Tapatalk Pro
__________________
Does anyone really know what time it is? |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.