ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

stockae92 · 8 April 2023, 03:09 PM

Finally the battery on my Breitling emergency ran out and its time for a battery change. I have DIY countless Casio / Timex / X-33 / Aerospace battery change. This is my first time doing battery change for the Emergency. I am pretty exciting about it.

Batteries required are one (1) 399 for the time keeping module, two (2) 2025 for the distress beacon module.

The process was quite straightforward for the distress beacon module, the time keeping module was a little tricky in the popping of the pressed in caseback, otherwise not too bad.

LCD was flashing some time ago, now LCD is out, hands stopped. Its time for a battery change.

Loosen the four screws from the caseback in order to separate the time keeping module and distress beacon module.

After removing the four screws, one can separate the two modules.

A closer look at the emergency beacon module. Breitling put the battery reference on the battery clip.

Old battery removed.

New battery installed.

Now moving on to the time keeping module. Its important to keep the metal tap safe and keep the proper alignment to the crown. I think this is for starting the chronograph automatically in the case of activation of the emergency beacon.

Breitling put the battery reference on the caseback.

The whole glory of the module.

New battery in, LCD test mode on, turn the crown to go to time keeping mode. At this point, just reverse all the step to put everything together. And then test it with the Breitling emergency beacon tester to verify that the emergency beacon is working.

The lesson learn is I am going to get one of those watch maker stand that can pop the caseback. That will make the job a lot easier. Otherwise, its not too bad. More steps involved than the other quartz watches that I did before, but nothing tricky. I enjoy this battery change. Cheers.

1William · 8 April 2023, 11:20 PM

Good job. I would just have to send it off.

RW16610 · 9 April 2023, 12:12 AM

Great work indeed, thanks for taking those images and sharing. The experience replacing batteries on the other models definitely paid off here. How long do the batteries typically last in this particular watch?

stockae92 · 9 April 2023, 05:10 PM

Quote:

Originally Posted by RW16610

Great work indeed, thanks for taking those images and sharing. The experience replacing batteries on the other models definitely paid off here. How long do the batteries typically last in this particular watch?

The battery lasted about 4 years. I think its a good run for a small battery like 399. :)

RW16610 · 10 April 2023, 08:14 AM

It certainly is, that's not bad at all. I'll have to seriously consider adding one of these to the collection.

HERITAGE82 · 11 April 2023, 01:24 AM

Great job & pics!

WatchmeTimepiece · 11 April 2023, 07:44 AM

Nice post!

Watchflair · 10 August 2023, 10:47 AM

Did it myself as well and definitely agree about the case back tool - that was the hardest part.

Sent from my iPhone using Tapatalk

MadilynnRyan · 8 December 2023, 05:01 PM

Agreed

lindsywes · 8 December 2023, 05:06 PM

For the Breitling Emergency, you'll need one (1) 399 battery for the time keeping module and two (2) 2025 batteries for the distress beacon module. It's great that the process seems pretty straightforward, though the time keeping module might require a bit more care when popping the pressed in caseback. Since you're new to this forum, welcome! I'm here to assist you and provide valuable insights. By the way, have you considered using a CR927 battery? It might be worth exploring as an alternative.

8 April 2023, 03:09 PM	#1
stockae92 2024 Pledge Member Join Date: Oct 2009 Location: Socal Posts: 4,947	Breitling Emergency DIY battery change Finally the battery on my Breitling emergency ran out and its time for a battery change. I have DIY countless Casio / Timex / X-33 / Aerospace battery change. This is my first time doing battery change for the Emergency. I am pretty exciting about it. Batteries required are one (1) 399 for the time keeping module, two (2) 2025 for the distress beacon module. The process was quite straightforward for the distress beacon module, the time keeping module was a little tricky in the popping of the pressed in caseback, otherwise not too bad. LCD was flashing some time ago, now LCD is out, hands stopped. Its time for a battery change. Loosen the four screws from the caseback in order to separate the time keeping module and distress beacon module. After removing the four screws, one can separate the two modules. A closer look at the emergency beacon module. Breitling put the battery reference on the battery clip. Old battery removed. New battery installed. Now moving on to the time keeping module. Its important to keep the metal tap safe and keep the proper alignment to the crown. I think this is for starting the chronograph automatically in the case of activation of the emergency beacon. Breitling put the battery reference on the caseback. The whole glory of the module. New battery in, LCD test mode on, turn the crown to go to time keeping mode. At this point, just reverse all the step to put everything together. And then test it with the Breitling emergency beacon tester to verify that the emergency beacon is working. The lesson learn is I am going to get one of those watch maker stand that can pop the caseback. That will make the job a lot easier. Otherwise, its not too bad. More steps involved than the other quartz watches that I did before, but nothing tricky. I enjoy this battery change. Cheers. __________________ 135 ├┼┼╕ 246 R

11 April 2023, 01:24 AM	#6
HERITAGE82 "TRF" Member Join Date: Feb 2010 Location: South Florida Posts: 3,433	Great job & pics! __________________ - Rolex Explorer - 214270 - Tudor Black Bay - 79230B - Tudor Chronograph - 79270P - Breitling Chronomat - 10th Anniv. - Huguenin Freres Speedmaster Prototype

10 August 2023, 10:47 AM	#8
Watchflair 2024 ROLEX SUBMARINER 41 Pledge Member Join Date: May 2012 Real Name: Jim Location: Westchester NY Watch: Love em all Posts: 5,912	Did it myself as well and definitely agree about the case back tool - that was the hardest part. Sent from my iPhone using Tapatalk __________________ Remember what matters. Value everyday

8 April 2023, 11:20 PM	#2
1William 2024 ROLEX SUBMARINER 41 Pledge Member Join Date: Nov 2010 Location: North Carolina Watch: Rolex/Others Posts: 47,293	Good job. I would just have to send it off.

9 April 2023, 12:12 AM	#3
RW16610 2024 ROLEX SUBMARINER 41 Pledge Member Join Date: Apr 2008 Real Name: Rommel Location: Toronto Canada Watch: 116710LN Posts: 9,163	Great work indeed, thanks for taking those images and sharing. The experience replacing batteries on the other models definitely paid off here. How long do the batteries typically last in this particular watch?

10 April 2023, 08:14 AM	#5
RW16610 2024 ROLEX SUBMARINER 41 Pledge Member Join Date: Apr 2008 Real Name: Rommel Location: Toronto Canada Watch: 116710LN Posts: 9,163	It certainly is, that's not bad at all. I'll have to seriously consider adding one of these to the collection.

11 April 2023, 07:44 AM	#7
WatchmeTimepiece "TRF" Member Join Date: Mar 2023 Real Name: Francisco Location: Huntington Beach Watch: Tudor Ranger Posts: 35	Nice post!

8 December 2023, 05:01 PM	#9
MadilynnRyan "TRF" Member Join Date: Oct 2023 Location: USA Posts: 1	Agreed

8 December 2023, 05:06 PM	#10
lindsywes "TRF" Member Join Date: Jun 2021 Location: USA Posts: 12	For the Breitling Emergency, you'll need one (1) 399 battery for the time keeping module and two (2) 2025 batteries for the distress beacon module. It's great that the process seems pretty straightforward, though the time keeping module might require a bit more care when popping the pressed in caseback. Since you're new to this forum, welcome! I'm here to assist you and provide valuable insights. By the way, have you considered using a CR927 battery? It might be worth exploring as an alternative.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)