![]() |
ROLEXROLEXROLEXROLEXROLEXROLEX
ROLEXROLEXROLEXROLEXROLEXROLEX
![]() |
#1 |
"TRF" Member
Join Date: Aug 2009
Location: USA
Posts: 19,706
|
Hollow end link “fix” on Neo Vintage Rolex?
What’s the best solution to “close the gap” on this hollow end link?
Can a careful “pinch” get the end link fitment to be closer to the watch case…or would it be better to replace the link / spring bar? Thanks! ![]() |
![]() |
![]() |
![]() |
#2 |
2024 Pledge Member
Join Date: Oct 2018
Location: Colorado, USA
Posts: 6,085
|
First thing is to make sure that you have the correct end link for the reference. Then you can experiment with adjusting the end-link and using different diameter spring-bars.
__________________
@oldwatchdan on IG |
![]() |
![]() |
![]() |
#3 | |
"TRF" Member
Join Date: Aug 2009
Location: USA
Posts: 19,706
|
Hollow end link “fix” on Neo Vintage Rolex?
Quote:
Thanks. When you say adjusting, you mean pinching? I hadn’t thought about spring bar diameter. That’s interesting. |
|
![]() |
![]() |
![]() |
#4 |
"TRF" Member
Join Date: Oct 2023
Location: USA
Posts: 173
|
I'm assuming the endlink is correct and the springbar is correct and in good condition. I would use nylon-tipped pliers to gently pinch the endlink. This can be done while the bracelet is attached but you may have better results detaching the bracelet first.
__________________
Senior L40 Watchmaker for a Rolex-Authorized Dealer
Graduate of the Lititz Watch Technicum |
![]() |
![]() |
![]() |
#5 | |
"TRF" Member
Join Date: Aug 2009
Location: USA
Posts: 19,706
|
Quote:
Ah. Interesting. Thanks for the suggestion. These are 557B end links on a 2002 Y serial… I hope those are correct. |
|
![]() |
![]() |
![]() |
#6 |
Banned
Join Date: Jul 2016
Location: The Doghouse
Watch: Ingersoll Mickey
Posts: 3,128
|
Lovely watch, BTW.
|
![]() |
![]() |
![]() |
#7 |
TRF Moderator & 2024 DATE-JUST41 Patron
Join Date: May 2007
Real Name: Larry
Location: Mojave Desert
Watch: GMT's
Posts: 43,342
|
Often the "fix" is to slightly bend the batwings on the backside to rotate that case contour in closer to the case.
Pinching, over time, results in a flat endlink that looks sunken into the lug. The true fix is to replace the worn tube inside the ends or sleeve the spring bar as the problem is often wear and a too much slop between the tube and bar.
__________________
(Chill ... It's just a watch Forum.....) NAWCC Member |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.