The Rolex Forums   The Rolex Watch

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX


Go Back   Rolex Forums - Rolex Forum > Rolex & Tudor Watch Topics > Rolex WatchTech

Reply
 
Thread Tools Display Modes
Old 20 June 2017, 10:19 AM   #1
---rolex---
"TRF" Member
 
Join Date: Dec 2015
Location: california
Watch: 18038
Posts: 8
Need some help installing the retaining ring on my Submariner!

Last night I wanted to change the bezel on my 1994 Submariner 14060. I tried to pry it off with a thin knife but ended up removing the entire retaining ring and crystal. I was able to force it back closed with my hands. But this morning I noticed a speck of dust on the inside of the crystal that wasn't there before, and it would drive me mad if I didn't get it out. So I took off the retaining ring again and cleaned the crystal. But now I can't seem to get it back onto the watch, and I've been trying for hours. Do you know of a method for putting it back on without using specific watchmakers' tools? I've heard of using a PVC pipe that's just the right size can work. Any other ideas?

Thanks for helping me undo my stupid mistake!
---rolex--- is offline   Reply With Quote
Old 20 June 2017, 12:36 PM   #2
NKflyer
2024 Pledge Member
 
Join Date: Jan 2012
Real Name: Richard
Location: Colorado
Posts: 2,858
If you have a Harbor Freight store nearby, they sell a very cheap crystal press (like <$15) that will actually work for your situation. Also, you will need to source a fresh crystal gasket because it's not secure to reuse the old one. Personally, I would take it to a reputable watchmaker who probably has the new gasket in stock, has the proper crystal press tool, and can pressure test it for you afterward to ensure waterproof.
NKflyer is offline   Reply With Quote
Old 20 June 2017, 01:23 PM   #3
---rolex---
"TRF" Member
 
Join Date: Dec 2015
Location: california
Watch: 18038
Posts: 8
Quote:
Originally Posted by NKflyer View Post
If you have a Harbor Freight store nearby, they sell a very cheap crystal press (like <$15) that will actually work for your situation. Also, you will need to source a fresh crystal gasket because it's not secure to reuse the old one. Personally, I would take it to a reputable watchmaker who probably has the new gasket in stock, has the proper crystal press tool, and can pressure test it for you afterward to ensure waterproof.

I do actually have one not too far. Is this the press you're talking about? https://www.harborfreight.com/watch-...ies-91621.html I didn't know they sold watchmaker tools!

I'll probably take it to my watchmaker soon to get a full service and all gaskets changed because it's due for that anyway, but I just wanted to get it wearable (even if not submergible) in the meantime.
---rolex--- is offline   Reply With Quote
Old 22 July 2024, 02:33 AM   #4
Dahccpa
"TRF" Member
 
Join Date: Apr 2024
Location: Colorado
Posts: 5
Seated Crystal Retaining Ring

Frustratingly dealing with the exact same issue as the OP on my GMT 16710. I have replaced the rubber gasket that sits under the crystal retaining ring and properly pressed the retaining ring back into place.

Wondering if anyone can confirm if the retaining ring should sit flush against the case, or should the rubber gasket be sitting between the case and the retaining ring?

Since there is a channel inside the lip of the retaining ring for the gasket to sit, it seems like it is impossible for the rubber gasket to end up between the retaining ring and the case when pressed. So currently my crystal retaining ring is sitting completely flush against the case with no sign of the rubber gasket at all when fully pressed.

Just wanted to see if anyone can confirm this is the correct installation. Thanks in advance!!
Dahccpa is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

DavidSW Watches

Takuya Watches

My Watch LLC

OCWatches

Wrist Aficionado

Asset Appeal

WatchesOff5th


*Banners Of The Month*
This space is provided to horological resources.





Copyright ©2004-2024, The Rolex Forums. All Rights Reserved.

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Rolex is a registered trademark of ROLEX USA. The Rolex Forums is not affiliated with ROLEX USA in any way.