ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
Yesterday, 08:56 AM | #1 |
2024 SubLV41 Pledge Member
Join Date: Sep 2008
Location: USA
Posts: 9,168
|
Found troubled 6542 - considering purchase …
I’m scared of vintage, but always wanted a GMT 6542 Pepsi. Found one today in brick & mortar jeweler.
I’d like your thoughts. Two options I’m considering: 1. Color match the dial to hands/bezel, get movement serviced, and wear it! 2. Fully restore it, but I think that might cost $100k. Things known to be wrong: 1. Bracelet: 1-70 folded, should be rivet C&I (I think) 2. Dial wrong and poorly relumed 3. Hands wrong 4. Aftermarket (bakelite-ish) bezel insert 5. Watch runs (smooth sweep) but winding is a little too stiff and date wheel isn’t tumbling over (tried through three days but stuck on “2”). Based on only seeing “2”, can’t tell if original, but black serif font on silver so could be correct. 6. Case pretty strong. Polished, but not overly. 7. Watch was not opened, so not sure if movement is correct or if case back stamped properly My price would be $26k “as is” with 2-year warranty and 14-day money back guarantee. Sent from my iPhone using Tapatalk |
Yesterday, 09:05 AM | #2 |
2024 SubLV41 Pledge Member
Join Date: Sep 2008
Location: USA
Posts: 9,168
|
Should date wheel be roulette, or were some years all black text? Is 24-hour hand wrong (arrow too big)?
Sent from my iPhone using Tapatalk |
Yesterday, 09:32 AM | #3 |
"TRF" Member
Join Date: May 2019
Location: Uk
Watch: RolexGMT/Tudor7928
Posts: 4,145
|
I think the 24 hour hand should be a lot smaller like half the size?. Interesting to see what direction you take on this one
|
Yesterday, 09:33 AM | #4 |
"TRF" Member
Join Date: Nov 2010
Real Name: AJ
Location: USA
Watch: Swiss
Posts: 5,235
|
Seems odd to me how the case is worn to hell yet the very flimsy Bakelite bezel is still relatively intact. I’ll wait for the vintage experts who should be arriving soon..
|
Yesterday, 09:44 AM | #5 |
"TRF" Member
Join Date: Jun 2020
Location: USA
Posts: 466
|
The price seems to be quite high for what is essentially a collection of service and aftermarket parts in poor condition.
There are several others on Chrono24 in similar or better condition for about $20,000 to $23,000 and some of those would be a better starting point for getting a presentable looking watch. At $26,000 for this one, knowing the difficulties of finding replacement parts and also knowing that it requires an unknown amount of servicing/repair, I would be looking very seriously at any other ones that are available. Although there are are a lot of good quality 6542s at very high prices there is actually very little interest in the poorer quality ones and so the prices are now quite reasonable if you can tolerate a service dial, aftermarket bezel insert, etc. |
Yesterday, 09:56 AM | #6 |
2024 SubLV41 Pledge Member
Join Date: Sep 2008
Location: USA
Posts: 9,168
|
|
Yesterday, 09:57 AM | #7 | |
2024 SubLV41 Pledge Member
Join Date: Sep 2008
Location: USA
Posts: 9,168
|
Quote:
Great advice! Sent from my iPhone using Tapatalk |
|
Yesterday, 10:01 AM | #8 |
2024 SubLV41 Pledge Member
Join Date: Nov 2006
Real Name: Eddie
Location: Australia
Watch: A few.
Posts: 37,449
|
I would resume the search.
__________________
E |
Yesterday, 10:07 AM | #9 |
2024 Pledge Member
Join Date: Oct 2018
Location: Colorado, USA
Posts: 6,238
|
I feel like there is not enough left to base a restoration on, just case and presumably movement.
__________________
@oldwatchdan on IG |
Yesterday, 10:23 AM | #10 |
"TRF" Member
Join Date: Jan 2009
Location: SC
Posts: 216
|
Pass, IMO it’s a money pit.
|
Yesterday, 10:36 AM | #11 |
2024 SubLV41 Pledge Member
Join Date: Sep 2008
Location: USA
Posts: 9,168
|
Thanks - moving on
Sent from my iPhone using Tapatalk |
Yesterday, 04:52 PM | #12 |
2024 SubLV41 Pledge Member
Join Date: Jan 2019
Location: Valencia, CA
Watch: GMT Master 1675/3
Posts: 2,185
|
|
Yesterday, 05:08 PM | #13 |
2024 Pledge Member
Join Date: Jan 2014
Location: london
Posts: 6,128
|
Effectively you’re buying a worn case with questionable vintage parts. Movement shouldn’t too hard or expensive to service and the case can be restored. The remaining parts are where the money is. $26k is way over. Late teens max and just wear the hell out of it!!
__________________
@imrootbeer7 |
Yesterday, 09:03 PM | #14 |
2024 Pledge Member
Join Date: May 2019
Location: Hobart
Posts: 1,030
|
I wouldn't touch that with $10000 dollars of my enemies money. Too much too wrong - looks nice though if you got it for $5000.
__________________
2 FA Enabled |
Yesterday, 11:23 PM | #15 |
2024 SubLV41 Pledge Member
Join Date: Nov 2010
Location: North Carolina
Watch: Rolex/Others
Posts: 47,459
|
Good move to move on. I like the concept of this watch in original and pristine condition but finding and paying for one will be a whole different story. Good luck as you look.
|
Yesterday, 11:30 PM | #16 |
2024 SubLV41 Pledge Member
Join Date: Jul 2013
Real Name: Brian (TBone)
Location: canada
Watch: es make me smile
Posts: 77,580
|
Good luck in your search
If I were serious about a heavy hitter like this, I’d work with an expert to source me one. I know you pay up for that, but IMHO that’s the best way to get an authentic example (assuming of course you want a good or pristine example). |
Currently Active Users Viewing This Thread: 4 (1 members and 3 guests) | |
cowboy music |
|
|
*Banners
Of The Month*
This space is provided to horological resources.