ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

19 July 2005, 01:59 AM

I recently purchased a Seiko 5 to play with (take apart for one thing, but haven't done it yet). The bracelet is a folded link style, looking a bit like an Oyster knock-off. Does anyone out there know what the correct tool/method is for removing the pins from the breacelet? I need to size it, but don't want to mess it up too much.......

Thanks, Al

padi56 · 19 July 2005, 02:23 AM

Quote:

Originally Posted by Avalon

I recently purchased a Seiko 5 to play with (take apart for one thing, but haven't done it yet). The bracelet is a folded link style, looking a bit like an Oyster knock-off. Does anyone out there know what the correct tool/method is for removing the pins from the bracelet? I need to size it, but don't want to mess it up too much.......

Thanks, Al

Those type of bracelets have collars over the pins to hold them in
try this link for information on how to remove its quite easy to do think they are all very similar.

http://www.network54.com/Forum/threa...eid=1067537620

Sam · 19 July 2005, 02:30 AM

Hey Padi...I think the bracelet you refer to is the one on the Monsters (SKX779 & SKX781).

The folded link bracelet doesn't have the collars. If you look at the underside of the bracelet, there should be a hole to put a small screwdriver (or something similar) into. Then just push against the bump in the direction of the arrow. These bracelets are a PITA to size.

padi56 · 19 July 2005, 02:40 AM

Yes Sam think you are right,yes now they can be a bugger to get out.

19 July 2005, 01:59 AM	#1
---- Guest Posts: n/a	Seiko help...... I recently purchased a Seiko 5 to play with (take apart for one thing, but haven't done it yet). The bracelet is a folded link style, looking a bit like an Oyster knock-off. Does anyone out there know what the correct tool/method is for removing the pins from the breacelet? I need to size it, but don't want to mess it up too much....... Thanks, Al

19 July 2005, 02:40 AM	#4
padi56 "TRF" Life Patron Join Date: Jun 2005 Real Name: Peter Location: Llanfairpwllgwyng Watch: ing you. Posts: 52,962	Yes Sam think you are right,yes now they can be a bugger to get out. __________________ ICom Pro3 All posts are my own opinion and my opinion only. "The clock of life is wound but once, and no man has the power to tell just when the hands will stop. Now is the only time you actually own the time, Place no faith in time, for the clock may soon be still for ever." Good Judgement comes from experience,experience comes from Bad Judgement,.Buy quality, cry once; buy cheap, cry again and again. www.mc0yad.club Second in command CEO and left handed watch winder

19 July 2005, 02:30 AM	#3
Sam Member Join Date: Jul 2005 Location: Texas Watch: Yes...too many!!! Posts: 426	Hey Padi...I think the bracelet you refer to is the one on the Monsters (SKX779 & SKX781). The folded link bracelet doesn't have the collars. If you look at the underside of the bracelet, there should be a hole to put a small screwdriver (or something similar) into. Then just push against the bump in the direction of the arrow. These bracelets are a PITA to size.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)