ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

LSUfan · 10 July 2016, 03:09 AM

I am trying to get my watch to fit and was wondering if I could slide the bracelet towards this indentation on the clasp. Is this possible and how?

mmalek1 · 10 July 2016, 04:43 AM

Just the micro adjustment on the easy link clasp. It is fairly easy to move. It just requires using a spring bar tool. Use the partially grooved path to move the the spring straight out and then follow the next path to the desired pin hole. If you don't want to try, easy job at any AD with minimal to no cost. The middle fits me best for now, but will see in the dead of winter.

steviebeat · 10 July 2016, 05:09 AM

Yes you can do it, its why they have those holes there. Or you could fold the clasp into the winter setting. But if you took it to a Rolex stockist they should do it for free..I couldn't imagine charging a customer for that it literally takes a couple of seconds.

LSUfan · 10 July 2016, 01:18 PM

Thanks guys. I will search for a video now that I know what it's called and make the decision if I can handle it or not.

LSUfan · 11 July 2016, 09:24 AM

So I decided to take it to a dealer and get help. They did this to my watch and said they didn't know how to fix it. Any idea what I should do now?

handsfull · 11 July 2016, 01:55 PM

Wow. Seriously? They screwed that up. You'll have to name that dealer as a courtesy to others.

Now it needs professional attention. There are two springbars in the clasp...one on the easylink and the other that holds the clasp lock together....someone removed the wrong one (clasp lock). Never seen this one before.

LSUfan · 11 July 2016, 09:29 PM

Quote:

Originally Posted by handsfull

Wow. Seriously? They screwed that up. You'll have to name that dealer as a courtesy to others.

Now it needs professional attention. There are two springbars in the clasp...one on the easylink and the other that holds the clasp lock together....someone removed the wrong one (clasp lock). Never seen this one before.

Reed's in Memphis. I'm taking it to another AD today.

rebel_1 · 11 July 2016, 09:55 PM

I had the same thing happen to my first GMTIIC easy link bracelet. I was able to "fix" it, although I cannot remember the details. In fact, I had forgotten all about it until I saw your picture. I don't remember it being all that difficult.

LSUfan · 11 July 2016, 11:56 PM

I'm going to have the wife take it somewhere today. I am shocked they did this to my watch.

michigan.watches · 12 July 2016, 07:11 AM

Take it to a qualified watchmaker or a Rolex AD. Nothing is broken. Whoever did this just doesn't know what they are doing.

handsfull · 12 July 2016, 08:42 AM

Quote:

Originally Posted by michigan.watches

Nothing is broken. Whoever did this just doesn't know what they are doing.

^ this. Especially the last part -LOL

LSUfan · 12 July 2016, 08:48 AM

I took it in and they have to keep it. They said some part was put in backwards.

steviebeat · 12 July 2016, 07:55 PM

wow if this went on in any place I worked people would be in trouble..can't see why it happened in the first place but also can't see why someone wants to keep it..its an easy job to fix it might take a while if you are doing it for the first time but its a job to do while the customer waits. Its like keeping the watch in to tighten a bracelet screw level of complication.

11 July 2016, 09:55 PM	#8
rebel_1 "TRF" Member Join Date: May 2010 Location: Florida Posts: 2,132	I had the same thing happen to my first GMTIIC easy link bracelet. I was able to "fix" it, although I cannot remember the details. In fact, I had forgotten all about it until I saw your picture. I don't remember it being all that difficult. __________________ Official Member: 'Perpetual 30' Vegas International GTG 2016 Official Member "WIS-CON" Las Vegas International GTG 2017

10 July 2016, 04:43 AM	#2
mmalek1 "TRF" Member Join Date: Jun 2007 Real Name: Matt Location: Virginia Watch: This one. Posts: 1,760	Just the micro adjustment on the easy link clasp. It is fairly easy to move. It just requires using a spring bar tool. Use the partially grooved path to move the the spring straight out and then follow the next path to the desired pin hole. If you don't want to try, easy job at any AD with minimal to no cost. The middle fits me best for now, but will see in the dead of winter.

10 July 2016, 05:09 AM	#3
steviebeat "TRF" Member Join Date: Jul 2009 Location: uk Posts: 47	Yes you can do it, its why they have those holes there. Or you could fold the clasp into the winter setting. But if you took it to a Rolex stockist they should do it for free..I couldn't imagine charging a customer for that it literally takes a couple of seconds.

10 July 2016, 01:18 PM	#4
LSUfan "TRF" Member Join Date: Apr 2016 Location: Memphis Posts: 67	Thanks guys. I will search for a video now that I know what it's called and make the decision if I can handle it or not.

11 July 2016, 01:55 PM	#6
handsfull "TRF" Member Join Date: Apr 2010 Real Name: J Location: The great Midwest Watch: youlookinat? Posts: 2,369	Wow. Seriously? They screwed that up. You'll have to name that dealer as a courtesy to others. Now it needs professional attention. There are two springbars in the clasp...one on the easylink and the other that holds the clasp lock together....someone removed the wrong one (clasp lock). Never seen this one before.

11 July 2016, 11:56 PM	#9
LSUfan "TRF" Member Join Date: Apr 2016 Location: Memphis Posts: 67	I'm going to have the wife take it somewhere today. I am shocked they did this to my watch.

12 July 2016, 07:11 AM	#10
michigan.watches "TRF" Member Join Date: Jan 2014 Location: Metro Detroit Posts: 586	Take it to a qualified watchmaker or a Rolex AD. Nothing is broken. Whoever did this just doesn't know what they are doing.

12 July 2016, 08:48 AM	#12
LSUfan "TRF" Member Join Date: Apr 2016 Location: Memphis Posts: 67	I took it in and they have to keep it. They said some part was put in backwards.

12 July 2016, 07:55 PM	#13
steviebeat "TRF" Member Join Date: Jul 2009 Location: uk Posts: 47	wow if this went on in any place I worked people would be in trouble..can't see why it happened in the first place but also can't see why someone wants to keep it..its an easy job to fix it might take a while if you are doing it for the first time but its a job to do while the customer waits. Its like keeping the watch in to tighten a bracelet screw level of complication.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)