![]() |
ROLEXROLEXROLEXROLEXROLEXROLEX
ROLEXROLEXROLEXROLEXROLEXROLEX
![]() |
#31 |
"TRF" Life Patron
Join Date: Jun 2005
Real Name: Peter
Location: Llanfairpwllgwyng
Watch: ing you.
Posts: 52,766
|
I have one bought for me several Christmases ago,its a rapport very nice box I looked at it and put it back in the cardboard box its still in the attic.Yes I have have a few bad years health wise beginning of this year did not think I was going to be still alive today.But I still got the use of my fingers and quite capable of using the winding crown after all thats what is for.And yes it must take all of 30 seconds to wind and set any watch, I feel so sorry for all those who find this a terrible chore to do.But if you did have a watch with many many complications like say a Patek.Then yes they could be a pure convenience as they are quite difficult to re-set, thats why Patek gives them free when you buy one of there many complication watches.But for Rolex watches that have mostly a simple date complication IMHO machine winders just plain humbug and not needed at all..
__________________
ICom Pro3 All posts are my own opinion and my opinion only. "The clock of life is wound but once, and no man has the power to tell just when the hands will stop. Now is the only time you actually own the time, Place no faith in time, for the clock may soon be still for ever." Good Judgement comes from experience,experience comes from Bad Judgement,.Buy quality, cry once; buy cheap, cry again and again. www.mc0yad.club Second in command CEO and left handed watch winder ![]() |
![]() |
![]() |
![]() |
#32 |
Banned
Join Date: Nov 2010
Location: Kingstown
Posts: 58,279
|
Peter, just be careful so you don't over wind it.
![]() |
![]() |
![]() |
![]() |
#33 |
"TRF" Member
Join Date: Oct 2012
Location: Left Coast
Posts: 7,025
|
The problem with that is the only way to make sure you don't go past the maximum forty turns is if the watch is completely stopped.
![]()
__________________
Some days it's just not worth chewing through the restraints. |
![]() |
![]() |
![]() |
#34 |
"TRF" Member
Join Date: Oct 2015
Real Name: Sean
Location: Alaska
Watch: Deep sea black
Posts: 227
|
My AD is Ben bridge they are offering a free watch winder for October promotion purchases this is my first Rolex and first luxury watch (it will be the deep sea black dial most likely) my question is do watch winders help keep the time more accurate or will simply wearing it achieve that. I work month on month and may not be able to wear it as much as I would like .
|
![]() |
![]() |
![]() |
#35 | |
"TRF" Life Patron
Join Date: Jun 2005
Real Name: Peter
Location: Llanfairpwllgwyng
Watch: ing you.
Posts: 52,766
|
Quote:
__________________
ICom Pro3 All posts are my own opinion and my opinion only. "The clock of life is wound but once, and no man has the power to tell just when the hands will stop. Now is the only time you actually own the time, Place no faith in time, for the clock may soon be still for ever." Good Judgement comes from experience,experience comes from Bad Judgement,.Buy quality, cry once; buy cheap, cry again and again. www.mc0yad.club Second in command CEO and left handed watch winder ![]() |
|
![]() |
![]() |
![]() |
#36 | ||
Banned
Join Date: Nov 2010
Location: Kingstown
Posts: 58,279
|
Quote:
Quote:
![]() |
||
![]() |
![]() |
![]() |
#37 |
Banned
Join Date: Nov 2015
Real Name: Karl
Location: Kuwait
Posts: 5,228
|
I think I am going to diarise 2 weeks and see if we get another watchwinder thread in the interim!!! At least this OP was educational!
|
![]() |
![]() |
![]() |
#38 |
"TRF" Member
Join Date: Jul 2007
Real Name: Mr. Taco
Location: Right Behind You.
Posts: 913
|
I have a '69 Tudor Day Date that I only wear once/twice a week, and can go 2-3 weeks without wearing it.
It is a pain in the ass to set, takes 2-3 minutes if it is more than 7 days past. As such I am in the market for a winder but I also have 2-3 cheap automatics I also only wear every once and while and would like to keep them wound. I need a completely silent option for 3 watches that is cheap and I don't think it exists, so I end up just not wearing my Tudor as much as I would like. |
![]() |
![]() |
![]() |
#39 |
"TRF" Member
Join Date: Oct 2016
Location: Florida
Posts: 6
|
I don't think a winder is needed but it really depends on the individual preference
Sent from my iPhone using Tapatalk |
![]() |
![]() |
![]() |
#40 |
"TRF" Member
Join Date: Dec 2004
Real Name: Adrian
Location: Bolton, UK.
Watch: Daytona 116520
Posts: 6,844
|
![]() This is my watch winder and I certainly need it, otherwise I'd have nothing to pick my nose with. ![]()
__________________
A man with a watch knows what time it is. A man with two watches is never sure.........Segal's Law Member #10 |
![]() |
![]() |
![]() |
#41 |
Banned
Join Date: May 2014
Real Name: John
Location: La Jolla, CA
Watch: Platona
Posts: 12,194
|
I own one but never use it.
|
![]() |
![]() |
![]() |
#42 |
"TRF" Member
Join Date: Jul 2016
Real Name: Allan
Location: Little Red Dot
Watch: Still Looking....!
Posts: 3,899
|
I have one too (hold 6 watches).............but, I never trun the power on....just display it and it do looks nice sitting in my study room~~
![]() |
![]() |
![]() |
![]() |
#43 | |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: Nov 2006
Real Name: Eddie
Location: Australia
Watch: A few.
Posts: 37,234
|
Ter setting the
Quote:
I have about a dozen watch winders in stock and could use them if necessary but: Let's look at scenario 1: You have automatic watches on a winder, you remove one to wear it, it is not on the correct time, it is a Rolex so you feel it really should be correct, you hack it on 12 and set it to your time source and strap it on. Scenario 2: You chose a Rolex from you safe, while you walk to the lounge (holding it in your left hand) you unscrew the crown giving it a few turns to start it and hack it on the 12. In the lounge you set it to your time source and strap it on. The difference - a few turns of the crown. Plus wear and tear on the movement during the previous months on the winder when it was not being used. As for the clumping of oils when not being used? It's a Rolex FGS not a old diesel tractor. ![]()
__________________
E |
|
![]() |
![]() |
![]() |
#44 |
"TRF" Member
Join Date: Oct 2016
Location: France
Posts: 42
|
It's not free you need to buy an expensive watch and the price of that watch include the winder.
__________________
'Three witches watch three Swatch watches. Which witch watch which Swatch watch ? |
![]() |
![]() |
![]() |
#45 |
"TRF" Member
Join Date: Dec 2007
Real Name: Capt Swerve
Location: North Carolina
Watch: less TV
Posts: 2,224
|
I have decided that watch winders are not for me. I do not have to many watches and the ones in the winder ran faster. Constantly. For example, my GO runs about +2 secs per day. In the winder it ran +10 secs per day. If anyone is interested in an Underwood winder, please PM me.
|
![]() |
![]() |
![]() |
#46 | |
2024 ROLEX DATEJUST41 Pledge Member
Join Date: Sep 2008
Location: New Mexico
Watch: 116710 BLNR
Posts: 34,404
|
Quote:
When I put on a watch I always set it to the correct time, which a winder will not maintain, regardless of its quality or price. Setting a watch, including the date, takes about two minutes.
__________________
JJ Inaugural TRF $50 Watch Challenge Winner |
|
![]() |
![]() |
![]() |
#47 |
Banned
Join Date: Nov 2015
Real Name: Karl
Location: Kuwait
Posts: 5,228
|
|
![]() |
![]() |
![]() |
#48 |
2024 Pledge Member
Join Date: Dec 2013
Real Name: Steve
Location: Indiana
Watch: PP/AP/VC
Posts: 2,116
|
I use winders because of the convenience of being ready to grab a watch and go. Depending on how long it has been on the winder, I may have to adjust the time by 5-10 minutes compared to my cell phone. I also really like how the watches are displayed (I use Wolf Meridian triple winders). I've heard all of the arguments before but am still not convinced that winders lead to early or excessive "wear and tear." I've never heard of anyone being told that they should or can extend the life of their watch by not wearing it. Or that a Rolex should be serviced every 5 years if it is worn daily and every 10 years if it isn't worn at all.
Sent from my iPhone using Tapatalk |
![]() |
![]() |
![]() |
#49 |
"TRF" Member
Join Date: Jan 2011
Location: Chicago
Watch: 114060
Posts: 202
|
While a relative newcomer here to Rolex Forums, posting-wise anyway, I'm a watch winder fan. I have a winder that with room for 8 automatic watches - and some of those watches have enough complexities (or are just a pain) to set beyond a few hours that I groove to the watch winder. To watch wind or not is kind of like the 9mm or .45 debate. I've heard plenty of arguments this way or that - nothing really sold me on "this is bad for your watch". What if I only had one watch? It's be on that automatic wrist winder all day long. My $0.02 in a long line of two cents on the subject.
|
![]() |
![]() |
![]() |
#50 |
Banned
Join Date: Jan 2017
Location: YYC-GIG
Watch: 16618LB
Posts: 675
|
The two sales people in my AD are split 5/50 on this.
Personally I won't buy one because spending 60 seconds to set and wind a watch isn't going to kill me.......and I don't want to wear out the watch faster when it is not in use if it is sitting on the winder. "If" there was a valid technical benefit to them, every AD would have every Rolex sitting on one. |
![]() |
![]() |
![]() |
#51 | |
"TRF" Member
Join Date: Feb 2016
Location: N/A
Watch: AP, VC, Breguet
Posts: 1,581
|
Quote:
__________________
The Most Valuable Commodity is Time Audemars, Vacheron, Breguet, Jaquet Droz, JLC, Rolex, Omega, Cartier |
|
![]() |
![]() |
![]() |
#52 |
"TRF" Member
Join Date: Mar 2017
Location: Washington
Watch: 16610LV
Posts: 66
|
Using a watch winder cause of the Gmt watch. It's not worth it for the other watches since it only takes a minute or so to reset it
|
![]() |
![]() |
![]() |
#53 |
"TRF" Member
Join Date: Feb 2012
Location: Sweden
Posts: 791
|
__________________
Submariner 116613 "Flat" First serial "V" 116610V Hulk |
![]() |
![]() |
![]() |
#54 |
"TRF" Member
Join Date: Jan 2016
Location: navy
Posts: 51
|
I just have it sitting
|
![]() |
![]() |
![]() |
#55 |
"TRF" Member
Join Date: Sep 2017
Location: Vietnam
Posts: 22
|
I have the only watch and wear it 24/7 so i dont need a winder
|
![]() |
![]() |
![]() |
#56 |
"TRF" Member
Join Date: Feb 2017
Location: Santa Monica, Ca
Watch: 116619
Posts: 1,334
|
If I was a new watch buyer I would be confused over this topic, however, having owned several Rolex watches with an Omega Seamaster sprinkled in, I have used watch winders for close to 20 years.
For me, the old adage “the proof in in the pudding” applies. Rotating my watches in and out of the winder for almost 20 years and never had any issue with any of them. As I type this, Omega has my 19 year old Seamaster for its first service. When they called me to advise of the service cost, to my surprise, it was just a service. No damage and the Seamaster has spent the most time on the winder ( maybe 8-12 months at a time). RSC has serviced my other watches and again, just service, no damage. So I see how people have many different views on winders, but it’s been my experience that they are an essential tool if you have more than one or two automatic watches. Now I’ve been told that other watches, maybe not as robust as Rolex, could have issues by spending months at a time in a winder. Like others have said, no right or wrong answer, just sharing my experience from say the last 20 years of using watch winders. If anyone is curious, for the last 10 years, I’ve used the Brookstone quad winder X2. ![]() |
![]() |
![]() |
![]() |
#57 |
"TRF" Member
Join Date: Jul 2018
Real Name: Norm
Location: Virginia, USA
Watch: 2005 DateJust
Posts: 103
|
Good insightful info. I often wondered if it was best to 'preserve' my watch by not putting it on a winder with constant motion of all the internal moving parts. Now I know. Cheers. -Norm
|
![]() |
![]() |
![]() |
#58 |
"TRF" Member
Join Date: Jul 2018
Location: Philadelphia/NYC
Posts: 129
|
I wish somebody did an actual study to determine if putting it on a winder is better or worse. A watch sitting still for 20 years has to have less wear than one in motion for 20 years. But does a watch that starts and stops over 20 years wear more than one that is constant motion?
|
![]() |
![]() |
![]() |
#59 |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: Jan 2018
Location: Toronto
Watch: ♕
Posts: 2,066
|
If I recall correctly, TRF member Vanessa CW21, who is a Rolex watch tech, recommends against the use of watch winders for several reasons.
Check out her post and reasons...think she even made it her sig at one point: https://www.rolexforums.com/showthre...ze#post5065210 "Okay I'm here to give my 2 cents since I was asked to give an opinion. I haven't read the responses given, since it's late and I plan on going to bed soon! I don't like winders. I don't like them for several reasons: 1) Most people assume they actually wind the watch... No, they keep the watch wound, which means it should still have a good amount of power reserve in order to maintain the power. I get plenty of customers complaining that their power reserve is too short "even though the watch was on the winder all day 3 days prior". 2) Cheap winders MAGNETIZE watches! The motors aren't insulated and cause the watches to start running erratically! I just had one two weeks ago, with a 2 y.o. DJII. A complete service of the movement was required. 3) Unless you're too old, or have some kind of medical condition that prevents you from having the feeling in your fingertips to wind the crown, I don't see a reason to need a winder. 4) I don't like the unnecessary wear it causes the movement. Unnecessary because you're putting wear on the watch while you're not even enjoying it. In the end, it's all up to you and I'm pretty sure all you TRF'ers know what to expect. I'm mostly having a hard time explaining to people who have absolutely no clue about the inner workings of a watch." |
![]() |
![]() |
![]() |
#60 |
"TRF" Member
Join Date: Aug 2018
Location: China
Posts: 12
|
If you have mechanical watches, you must need one kind of watch winder to make your mechanical watches keep running when it wasn't worn. It's really necessary.
This article may help: https://purchasing.ecvv.com/index.ph..._article_id=11 |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.