![]() |
ROLEXROLEXROLEXROLEXROLEXROLEX
ROLEXROLEXROLEXROLEXROLEXROLEX
![]() |
#1 |
"TRF" Member
Join Date: Aug 2022
Location: Atlanta, GA
Posts: 69
|
Atlanta AD for sizing?
Need to get a couple of links taken out of my new 36 mm OP celebration. Was planning on going to the Buckhead location of Brown and Company to have this done. I’ve seen others say it’s not necessary to go to an A.D., but then I’ve seen many say that going to an AD is your best bet. Anyone have opinions on this? Should I request that the tech at the store do it or would a sales person be competent? I’m assuming they probably do this type of work very often. I just think I’d be more comfortable going to an A.D. rather than a local watchmaker, but I am definitely open for opinions/suggestions. Thanks!
April |
![]() |
![]() |
![]() |
#2 |
"TRF" Member
Join Date: Jul 2013
Location: US
Posts: 382
|
I bought a Rolex screwdriver specifically for this, but Bergeon makes great ones too. I will take my time doing it, tape off what I think is necessary and with the proper screwdriver, you won't damage the heads.
Otherwise, yes, I'd find the best AD in town to do it. I'm not in ATL so I cannot recommend one. |
![]() |
![]() |
![]() |
#3 | |
"TRF" Member
Join Date: Aug 2022
Location: Atlanta, GA
Posts: 69
|
Quote:
|
|
![]() |
![]() |
![]() |
#4 |
"TRF" Member
Join Date: Jun 2012
Location: Lakeville, MN
Watch: 126610LN Finally!
Posts: 390
|
I was thinkin of repositioning some links, I have 4 at 6 oclock and 6 at 12 oclock.
What tools did you get? |
![]() |
![]() |
![]() |
#5 |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: Mar 2017
Location: United States
Watch: Rolex and Patek
Posts: 11,033
|
The loctite can be really tricky to loosen. I would let an AD do it, if they will.
|
![]() |
![]() |
![]() |
#6 |
"TRF" Member
Join Date: Jan 2019
Location: USA
Watch: ing my wrist
Posts: 1,155
|
I'd personally buy the right size screwdriver. Many ADs will scratch your watch up, and you will probably have no recourse.
No one cares about your watch as much as you do, so you will take the greatest care. If you have loctite that needs to be loosened, just put it under a hairdryer for a minute or so, and you'll likely be good to go. Work slowly, and you'll be fine! One more thing to note: you may want to use the microadjust after taking out the link(s). You'll need a spring bar tool or tweezers for this. Also, I'd go to an actual watchmaker before I used a sales associate at an AD! |
![]() |
![]() |
![]() |
#7 |
"TRF" Member
Join Date: Feb 2024
Location: Atlanta, GA
Posts: 90
|
I am in Atlanta, if I was going to have an AD do it, it would be Brown and Co. They have a pretty long reputation and they have been good enough to not only keep expanding their Rolex offerings but also get tagged to spearhead the Patek boutique opening this summer as well.
|
![]() |
![]() |
![]() |
#8 | |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: Jul 2012
Real Name: Kat
Location: CA, USA
Watch: 126233 Wimbledon T
Posts: 6,909
|
Atlanta AD for sizing?
Quote:
Yes, just take it to Brown and Co. The ADs have a machine that heats the links, to soften the Loctite applied at the factory. Best to let them do it. If you get deep into the hobby, you can buy a set of watch tools, and do it yourself, like many of us here. Congrats on your new Celebration OP. Kat Sent from my iPad using Tapatalk |
|
![]() |
![]() |
![]() |
#9 | |
"TRF" Member
Join Date: Aug 2022
Location: Atlanta, GA
Posts: 69
|
Quote:
|
|
![]() |
![]() |
![]() |
#10 | |
"TRF" Member
Join Date: Aug 2022
Location: Atlanta, GA
Posts: 69
|
Quote:
|
|
![]() |
![]() |
![]() |
#11 |
"TRF" Member
Join Date: Mar 2024
Location: Australia
Posts: 163
|
SA’s size a new Rolex when you purchase so I just let them do future adjustments for me. Totally understand the desire to ensure it’s done without scratches and with the most experienced person. Assume SA’s at Rolex are trained in this activity. I’m scared to do micro adjustments on my clasp and just let them do it. They’ve always advised me to come in rather than DIY’ing it. Maybe they can just tell I have no idea.
|
![]() |
![]() |
![]() |
#12 |
"TRF" Member
Join Date: May 2019
Location: Uk
Watch: RolexGMT/Tudor7928
Posts: 3,702
|
Definitely best to let your AD resize it for you. The last thing you want is to scratch it doing it yourself and they are well practiced in doing such jobs
|
![]() |
![]() |
![]() |
#13 |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: Mar 2007
Location: LA
Watch: what’s next.
Posts: 1,158
|
|
![]() |
![]() |
![]() |
#14 |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: Sep 2015
Real Name: Richard
Location: GA
Watch: YTBD
Posts: 23,108
|
I’m in the ATL area, and would use Brown & Co if I were to take it to an AD.
I personally do my own bracelet adjustments. |
![]() |
![]() |
![]() |
#15 |
"TRF" Member
Join Date: Apr 2008
Location: Washington, DC
Posts: 187
|
It's not hard, just buy the correct tools and take your time. You'll be happy after you are done!
|
![]() |
![]() |
![]() |
#16 |
"TRF" Member
Join Date: Oct 2020
Location: Liverpool UK
Posts: 231
|
|
![]() |
![]() |
![]() |
#17 | |
2024 Pledge Member
Join Date: Jun 2016
Real Name: Jeff
Location: PNW
Posts: 1,440
|
If you ever do attempt it, make sure you use a hollow ground screwdriver. Its not just about the size of the screwdriver.
Quote:
|
|
![]() |
![]() |
![]() |
#18 |
"TRF" Member
Join Date: Jun 2020
Location: United Kingdom
Watch: Rollie
Posts: 775
|
|
![]() |
![]() |
![]() |
#19 |
"TRF" Member
Join Date: Feb 2015
Location: usa
Posts: 318
|
|
![]() |
![]() |
![]() |
#20 |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: Sep 2015
Real Name: Richard
Location: GA
Watch: YTBD
Posts: 23,108
|
|
![]() |
![]() |
![]() |
#21 |
"TRF" Member
Join Date: Feb 2023
Location: Us
Posts: 246
|
Browns has a great guy on staff that can do it. Of course not sure what policy is, if you didn’t buy it from them. But they are the best
|
![]() |
![]() |
![]() |
#22 |
"TRF" Member
Join Date: Aug 2022
Location: Atlanta, GA
Posts: 69
|
Thank you! I called the Buckhead location and they said they could do it. Is that the location that has the guy you're referring to or the Roswell location?
|
![]() |
![]() |
![]() |
#23 |
"TRF" Member
Join Date: Aug 2022
Location: Atlanta, GA
Posts: 69
|
|
![]() |
![]() |
![]() |
#24 |
"TRF" Member
Join Date: Dec 2018
Location: Georgia USA
Posts: 366
|
Roswell is where the service department and Rolex certified watch maker is. This is my main AD and has been for many years. Was just in there yesterday. Try going on a week day when it’s not so busy. Weekends at the service desk can be pretty nuts
|
![]() |
![]() |
![]() |
#25 |
"TRF" Member
Join Date: Dec 2009
Real Name: Bob
Location: Mountains
Watch: ALS, AP, PP, Rolex
Posts: 2,958
|
Buy a screwdriver; save a trip.
|
![]() |
![]() |
![]() |
#26 |
"TRF" Member
Join Date: Aug 2022
Location: Atlanta, GA
Posts: 69
|
Ahh, okay thanks for letting me know. I wasn't really super happy about going to Buckhead but it's about 15 mins. closer to me. Think I'll try Roswell. I'll definitely go on a weekday when they're less busy. Thanks again!
|
![]() |
![]() |
![]() |
#27 |
"TRF" Member
Join Date: Jan 2024
Location: GA
Posts: 25
|
I did it myself and also brought to AD as well, here is my experience :
+ DIY : get ifixit tool box, iFixit Mako Driver Kit - 64 Precision Bit Set for Electronics Repair and loctite 242. Use heat gun, to heat it before unscrew. + AD : Mayors, they are in Atlanta and Alpharetta. Best of luck. |
![]() |
![]() |
![]() |
#28 |
2024 Pledge Member
Join Date: Jan 2012
Real Name: Richard
Location: Colorado
Posts: 2,857
|
The best tool I've ever used for DIY Rolex sizing is a knockoff copy of the Panerai screwdriver. It's 1.6mm, hollow-ground (a.k.a. cut out) tip. They're pretty ubiquitous, but here's one for sale on eBay for reference.
I prefer to size my own watches because I've had jewelers scratch them before, like others have mentioned. Also, you can really take your time tinkering with the fitment, move/center the clasp, etc. If the loctite is super tight, hit it with a cigarette lighter for a second or two. |
![]() |
![]() |
![]() |
#29 |
"TRF" Member
Join Date: Sep 2021
Location: Kentucky
Posts: 51
|
My AD actually dinged my brand new sub bracelet resizing it for me. I only noticed because the metal was gouged out and was sharp. Looking at it up close he link and screw head we’re messed up. I was worried they would have to order a new link part but they made it perfect when I brought it up. They also apologized and said they used the wrong screwdriver. Not sure what they did but it’s perfect now.
![]() ![]() ![]() |
![]() |
![]() |
![]() |
#30 | |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: Jul 2012
Real Name: Kat
Location: CA, USA
Watch: 126233 Wimbledon T
Posts: 6,909
|
Quote:
Why put THAT idea in a newbie’s head??? Geesh….. OP, take it to any competent jeweler, or AD, and you will be fine. Kat Sent from my iPad using Tapatalk |
|
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.