ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

tmmii · 25 November 2019, 02:03 PM

Have a 10 year old or so Mont Blanc with the twist at the bottom to have the ink part come out (very technical terms I know!) that doesn’t work. Sent to Mont Blanc and they said the part is nla. Is there an independent repair shop or aftermarket parts manufacturers?

Arcticsub · 26 November 2019, 05:17 AM

Parts of a 10 year old Montblanc piston filler that are no longer available? Do you know what model?

Bisquitlips · 26 November 2019, 01:17 PM

The MB Forum on FPN could speak to this question.

They will need to know the model and will likely know a source for parts and repair.

http://www.fountainpennetwork.com/fo.../69-montblanc/

tmmii · 28 November 2019, 04:09 PM

Hoping this loads, but the plaid looking star walker.

tamiya · 28 November 2019, 05:35 PM

MB usually has good afterservice... if they admit can't fix, they didn't offer to changeover to a current equivalent?

No idea on ballpoint mechanisms, but for their FPs MB has been known to remanufacture new parts for old FPs long after (decades!) the original been sold. Some old pens comeback from service so renewed, only the old nib remains :)

Arcticsub · 29 November 2019, 01:26 AM

Quote:

Originally Posted by tamiya

MB usually has good afterservice... if they admit can't fix, they didn't offer to changeover to a current equivalent?

No idea on ballpoint mechanisms, but for their FPs MB has been known to remanufacture new parts for old FPs long after (decades!) the original been sold. Some old pens comeback from service so renewed, only the old nib remains :)

Yes, good point. One of the cooler things about Montblanc. Reminds me of Patek.

My advice would also be to check with the MB forum on the FPN.

Etouffee · 30 November 2019, 02:38 AM

I have a 28 year old Meisterstuck Rollerball that I sent to Mont Blanc Dallas... Was very impressed with the service. Not only did they repair the issues with the pen but also sent another duplicate pen. Maybe because I've had it so long, I've had since new. The repairs were less than $200.00. This was about two years ago. I am surprised that they offered no alternative solutions to you.

Jabbo84 · 30 November 2019, 02:43 AM

That’s odd. Mont Blanc Dallas told me they had no pen repair program. I will inquire again. Thanks for bringing this up

Thurnau · 31 March 2020, 10:53 AM

Quote:

Originally Posted by tmmii

Have a 10 year old or so Mont Blanc with the twist at the bottom to have the ink part come out (very technical terms I know!) that doesn’t work. Sent to Mont Blanc and they said the part is nla. Is there an independent repair shop or aftermarket parts manufacturers?

I wish I could find an independant too. My rollerball starwalker cap is almost stripped when recapping the pen. I was hoping to find someone in the USA. Montblanc won't fix it, no parts available.

HogwldFLTR · 26 May 2020, 07:56 AM

Here's one off hand. I can't attest to how good they do however here they are.

https://pentiques.com/

jar · 26 May 2020, 10:41 AM

Aaron is really good but there's not much that really can be done for your pen. It's worth a call or email though. Note that what you have is also one of the more commonly faked Montblancs.

HogwldFLTR · 26 May 2020, 11:23 PM

Quote:

Originally Posted by jar

Aaron is really good but there's not much that really can be done for your pen. It's worth a call or email though. Note that what you have is also one of the more commonly faked Montblancs.

Good to know that he's there as Montblanc stores aren't really open around here currently.

pickettt · 27 May 2020, 12:04 AM

I had an MB “repaired” at a boutique once. That’s in quotes because they actually REPLACED all of the resin parts.

Arcticsub · 17 June 2020, 07:02 AM

Quote:

Originally Posted by pickettt

I had an MB “repaired” at a boutique once. That’s in quotes because they actually REPLACED all of the resin parts.

Uh yeah that's pretty much standard practice unless you explicitly tell mb you don't want them to replace specific parts.

peobles21 · 29 December 2020, 01:48 AM

Sure go one around Me

HogwldFLTR · 18 May 2021, 06:32 PM

Quote:

Originally Posted by peobles21

Sure go one around Me

No idea what this means???

jar · 18 May 2021, 09:00 PM

Quote:

Originally Posted by HogwldFLTR

No idea what this means???

Likely "Sure no one around me."

tmmii · 11 December 2021, 01:06 AM

Quote:

Originally Posted by HogwldFLTR

Here's one off hand. I can't attest to how good they do however here they are.

https://pentiques.com/

Finally got tired of this thing not working and called. They referred me to Steve at NW fine Jewelry. He told me $35-$75 to fix it but would need to see it first so I shipped it out. $49 including shipping and insurance back and it works and has a new ink cartridge in it. Great experience. steve at nw fine jewelers .com is his email if anyone needs anything similar repaired.

Harvie · 30 April 2022, 02:46 PM

Steve is a good man, he replaced the white cap on.my 164p for 40-50 bucks.

25 November 2019, 02:03 PM	#1
tmmii "TRF" Member Join Date: Oct 2018 Location: USA Posts: 112	Independent Mont Blanc repairs? Have a 10 year old or so Mont Blanc with the twist at the bottom to have the ink part come out (very technical terms I know!) that doesn’t work. Sent to Mont Blanc and they said the part is nla. Is there an independent repair shop or aftermarket parts manufacturers?

26 November 2019, 01:17 PM	#3
Bisquitlips 2024 Pledge Member Join Date: Sep 2008 Real Name: Richard Location: USA Watch: YM Deep Space Posts: 12,521	The MB Forum on FPN could speak to this question. They will need to know the model and will likely know a source for parts and repair. http://www.fountainpennetwork.com/fo.../69-montblanc/ __________________ Rolex Yacht-Master 40mm (SS-YG / Deep Space MOP) 16623 Breitling Aerospace Titanium / 18K with UTC. Omega Speedmaster 3510.50 Oris TT1 Pro Diver Regulator 43MM

26 May 2020, 07:56 AM	#10
HogwldFLTR 2024 ROLEX SUBMARINER 41 Pledge Member Join Date: Aug 2012 Real Name: Lee Location: 42.48.45N70.48.48 Watch: Too many to list! Posts: 33,643	Here's one off hand. I can't attest to how good they do however here they are. https://pentiques.com/ __________________ Troglodyte in residence! https://www.rolexforums.com/showthread.php?t=808599

26 November 2019, 05:17 AM	#2
Arcticsub "TRF" Member Join Date: Nov 2019 Location: Local group Posts: 226	Parts of a 10 year old Montblanc piston filler that are no longer available? Do you know what model?

28 November 2019, 05:35 PM	#5
tamiya "TRF" Member Join Date: Jul 2017 Real Name: Willy Location: AU, SG, MY Posts: 1,248	MB usually has good afterservice... if they admit can't fix, they didn't offer to changeover to a current equivalent? No idea on ballpoint mechanisms, but for their FPs MB has been known to remanufacture new parts for old FPs long after (decades!) the original been sold. Some old pens comeback from service so renewed, only the old nib remains :)

30 November 2019, 02:38 AM	#7
Etouffee "TRF" Member Join Date: Nov 2019 Location: Louisiana, USA Posts: 20	I have a 28 year old Meisterstuck Rollerball that I sent to Mont Blanc Dallas... Was very impressed with the service. Not only did they repair the issues with the pen but also sent another duplicate pen. Maybe because I've had it so long, I've had since new. The repairs were less than $200.00. This was about two years ago. I am surprised that they offered no alternative solutions to you.

30 November 2019, 02:43 AM	#8
Jabbo84 Banned Join Date: May 2019 Real Name: John Location: Tyler,Texas Watch: Rolex/Piaget Posts: 966	That’s odd. Mont Blanc Dallas told me they had no pen repair program. I will inquire again. Thanks for bringing this up

26 May 2020, 10:41 AM	#11
jar "TRF" Member Join Date: Nov 2016 Real Name: jim Location: Deep South Texas Watch: Samsung Gear S3 Posts: 757	Aaron is really good but there's not much that really can be done for your pen. It's worth a call or email though. Note that what you have is also one of the more commonly faked Montblancs.

27 May 2020, 12:04 AM	#13
pickettt "TRF" Member Join Date: Jul 2017 Location: California Watch: Shiny One Posts: 5,439	I had an MB “repaired” at a boutique once. That’s in quotes because they actually REPLACED all of the resin parts.

29 December 2020, 01:48 AM	#15
peobles21 Banned Join Date: Apr 2018 Real Name: peable pablo Location: Instabul Turkey Watch: Roles Posts: 24	Sure go one around Me

30 April 2022, 02:46 PM	#19
Harvie Banned Join Date: Sep 2009 Real Name: Peter Location: in my house Watch: Yes Posts: 132	Steve is a good man, he replaced the white cap on.my 164p for 40-50 bucks.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)