![]() |
ROLEXROLEXROLEXROLEXROLEXROLEX
ROLEXROLEXROLEXROLEXROLEXROLEX
![]() |
#1 |
TRF Moderator & 2024 SUBMARINER Patron
Join Date: May 2007
Real Name: Larry
Location: Mojave Desert
Watch: GMT's
Posts: 43,349
|
Making It Fit........The Bracelet.
Omega uses pins to hold the bracelet together. To confound this, the nice clasp they provide does not have any micro-holes for adjustment..
But you can do it: First you need a couple of simple tools. Either a bracelet pin removal tool...or A pin punch the approximate diameter (smaller) of the pins. A small hammer to tap the pin out. A pair of small pliers to pull out and insert the pin. Something like this: a-tools.jpg Looking at the links from the backside, some small arrows can be seen etched in the removable links. The pins are pushed out in the direction of the arrows. Place the bracelet in a padded vice, or hold sturdily on a piece of padded wood....or two with a small space between for the pin to have room to come out. After the pin is started out, it can be pulled the rest of the way with the pliers. This photo shows two pins partially out. b-Arrows.jpg Here we see the parts. You will notice we have two full links and one 1/2 link. The other parts are the locking tube and the pin. This photo also shows that the center links are actually three pieces and it is possible to mis-align the thin outside pieces.. c-3things.jpg Unfortunately it is trial and error to know if you need a link out/added or a half link, or several, so don't put it together tightly unless you try it on "mocked up" first. When you have the size you want, it's time to reassemble. The locking tube is inserted first in the center link, the link is mated up, and the pin is inserted. It is important that you notice that the pin has a long smooth side and a shorter side with a crimp. The crimp is what locks into the locking tube so it is important to insert the long end first. Push it in against the arrow (opposite of removal) This shows the proper assembly order: d-pinalign.jpg
__________________
(Chill ... It's just a watch Forum.....) NAWCC Member Last edited by Tools; 9 February 2020 at 10:48 AM.. |
![]() |
![]() |
![]() |
#2 |
2024 Pledge Member
Join Date: Jun 2007
Real Name: Robb
Location: USA
Watch: BLNR
Posts: 4,938
|
Great tutorial!!!!
__________________
126610LN l 166610LV l 126619LB l 116710BLNR l 126710BLRO l 126720VTNR l 126718GRNR l 116500 white l 116500 black l 116508 john mayer l 116519LN l 116503 white l 126655 l 226627 Ti Master l 116518LN |
![]() |
![]() |
![]() |
#3 |
"TRF" Member
Join Date: Nov 2007
Location: Perth/Singapore
Posts: 1,764
|
look like seiko links that are on my divers watch
|
![]() |
![]() |
![]() |
#4 |
"TRF" Member
Join Date: Jul 2007
Real Name: Gary
Location: GMT-6
Watch: GMT
Posts: 3,350
|
Great stuff, Larry. I understand that if you use a pin pusher you must get one with a longer pin as the regular pin won't push an Omega pin out far enough. Thanks foe the helpful instructions.
__________________
Omega Seamaster 300M GMT Noire Omega Seamaster Aqua Terra 8500 Benson 1937 Sterling Silver Hunter |
![]() |
![]() |
![]() |
#5 |
"TRF" Member
Join Date: Jul 2007
Real Name: Gary
Location: GMT-6
Watch: GMT
Posts: 3,350
|
Larry,
If you are chnaging the bracelet and need to lay it flat is this the only way to half the strap or is there a spring pin on the clasp somewhere?
__________________
Omega Seamaster 300M GMT Noire Omega Seamaster Aqua Terra 8500 Benson 1937 Sterling Silver Hunter |
![]() |
![]() |
![]() |
#6 |
"TRF" Member
Join Date: Jul 2007
Real Name: Bill
Location: NE Georgia
Watch: Rolex Explorer II
Posts: 1,820
|
Thanks, Larry! I think that even I can do that thanks to your clear explanation! Cheers, Bill P.
|
![]() |
![]() |
![]() |
#7 |
"TRF" Member
Join Date: Dec 2007
Real Name: David
Location: USA
Watch: your step!
Posts: 7,882
|
Outstanding! I tried this a couple months ago on my SMP, but then wisely decided it was best to take it to the AD, since I nearly lost the tube.
__________________
Rolex. The Rolex of watches. 16570 Expy2 Noir, 116710 GMT Master II, 2552.80 SMP |
![]() |
![]() |
![]() |
#8 |
"TRF" Member
Join Date: Oct 2007
Location: TN
Watch: Rolex
Posts: 2,166
|
thanks! have a 2254 coming soon!
__________________
Z- Submariner; P- Airking; R- DateJust; M- GMTII; C0 - Milgauss GV Breitling SuperOcean Heritage 46 Omega Speedmaster Racing Panerai PAM390 |
![]() |
![]() |
![]() |
#9 |
Banned
Join Date: Feb 2009
Location: NY
Posts: 6,382
|
Thanks to your tutorial, mine GMT not flop around on my wrist.
You're one-of-the-best! ![]() |
![]() |
![]() |
![]() |
#10 |
"TRF" Member
Join Date: Oct 2007
Real Name: Monty
Location: Georgia
Watch: Sub LV
Posts: 787
|
Thanks for sharing!
|
![]() |
![]() |
![]() |
#11 |
"TRF" Member
Join Date: Nov 2009
Location: San Diego, CA
Posts: 4
|
I used one of those cheap plastic tools sold at Amazon, those blue ones. It works amazingly! I highly recommend them, and I didn't damage the links at all.
|
![]() |
![]() |
![]() |
#12 |
2024 Pledge Member
Join Date: Aug 2008
Posts: 5,430
|
Does the planet ocean links have the locking tubes also?
__________________
2 FACTOR AUTHENTICATION ENABLED. |
![]() |
![]() |
![]() |
#13 |
"TRF" Member
Join Date: Oct 2008
Real Name: Jim
Location: Anchorage, Alaska
Watch: Rolex
Posts: 1,188
|
Another great tutorial! Thanks, Larry!
![]()
__________________
My collection, in order of acquisition: 16610 Sub (Z serial) 16710 GMT-Master II (Coke and Pepsi) (Z serial) 16570 Explorer II (White) (F serial) 116660 Deepsea (V serial) 79270 Tudor Tiger Chrono (red dial) |
![]() |
![]() |
![]() |
#14 |
"TRF" Member
Join Date: Jul 2008
Location: CONUS
Watch: One That Works.
Posts: 10
|
Half links Info...
The Seamasters come with one half link.
The speedmaster 3570.50.00 has no half links. Two half links, are longer then one full link. The half link from the Seamaster Speedy bracelet fits: The Speedmaster 3570.50.00 bracelet. Adding one,or two half links. Sometimes solve the bracelet fitment problems. On Omega watches. Omega should ship all of their watches with two half links. But this is not the case. Just food for thought. Adding one half link, to my 3570.50.00. Made the bracelet fit correctly. For those who purchase new, ask the AD to include a half link. With your purchase. |
![]() |
![]() |
![]() |
#15 |
"TRF" Member
Join Date: May 2010
Real Name: Peter
Location: Central NJ USA
Posts: 280
|
Awesome.. I just took out a half link.
Thanks!! ![]() |
![]() |
![]() |
![]() |
#16 |
"TRF" Member
Join Date: Sep 2005
Real Name: Steve
Location: Queensland, AUST
Posts: 2,003
|
Great tutorial...thanks!
|
![]() |
![]() |
![]() |
#17 |
Banned
Join Date: Jul 2010
Real Name: janice
Location: St.Petersburg Fl
Watch: all of them!
Posts: 673
|
very helpfull pix
those pix were very helpfull as we just removed links from a bond seamaster so i would fit my wrists
![]() janice :) |
![]() |
![]() |
![]() |
#18 |
Banned
Join Date: May 2010
Location: USA
Watch: Tudor BB S&G
Posts: 138
|
Thank God found this post before I demolished my braclet! Great information! This is why I love this site!!
|
![]() |
![]() |
![]() |
#19 |
Member
Join Date: Aug 2010
Real Name: Terry
Location: Nashville TN
Posts: 22
|
This is great info for Rolex Datejust that was a bit loose...for husbands wrist...
thanks for taking the time to list!! |
![]() |
![]() |
![]() |
#20 |
"TRF" Member
Join Date: Jul 2010
Real Name: tom
Location: northern ireland
Watch: my fins
Posts: 10,063
|
heres a tip , find a small block of wood , say 3x3 inch , and about 3/4 inch thick , and drill a 2mm hole in it , then line the pin your driving out up with the hole , it gives the pin somewhere to go , and the whole job gets easier .
hope tha helps |
![]() |
![]() |
![]() |
#21 | |
"TRF" Member
Join Date: Oct 2009
Location: Here and there
Posts: 12,485
|
Quote:
![]() ![]()
__________________
Fine Quality is Long Remembered After the Pain of Spending Money is Forgotten |
|
![]() |
![]() |
![]() |
#22 |
"TRF" Member
Join Date: Oct 2009
Real Name: Jason
Location: Tejas
Watch: Invicta
Posts: 1,066
|
This may sound lame, but the push-pin bracelets are the only reason I can't fall in love with Omega or any other watch that has a bracelet that has pins instead of screws.
|
![]() |
![]() |
![]() |
#23 |
Member
Join Date: Oct 2010
Location: CALIFORNIA
Watch: rolex ex. sub gmt
Posts: 61
|
If the pin tends to be sloppy a touch of nail varnish help keep it tight the purze
|
![]() |
![]() |
![]() |
#24 |
"TRF" Member
Join Date: Aug 2010
Real Name: Gordon
Location: California
Watch: Gmtll,LV,SD,GV,etc
Posts: 627
|
Ok, all you Macguver fans...
A few years back, I bought my parents matching Constellations (gold/ss). In a pinch, I did not have a punch pin of the right size and length. So, I used pieces of metal I cut from a good sized safety pin. It has to be straight, large enough in diameter to be strong, small enough in diameter to fit the bracelet hole. I supported the bracelet on small toy blocks, and held the safety pin pieces with a small needle nose plier and tapped the Omega pins and tubes out. When replacing the Omega pins, I used the safety pins pieces as a set punch to carefully drive the Omega pins flush. Gutsy in my early days... now I like Bergeon watch tools! |
![]() |
![]() |
![]() |
#25 |
"TRF" Member
Join Date: Sep 2010
Location: Tennessee
Posts: 91
|
Thanks
Information like this is always better shared. Much obliged.
|
![]() |
![]() |
![]() |
#26 |
"TRF" Member
Join Date: Jan 2011
Location: NY, USA
Posts: 87
|
excellent , thank you so much. I always size any bracelet inside an old shirt box, much like you'd get at a department store. This way if something rolls away from you or pops out it will hopefully be contained in the box and you dont find yourself crawling around on the floor looking for it.
best regards, al |
![]() |
![]() |
![]() |
#27 |
"TRF" Member
Join Date: Oct 2010
Location: Australia
Posts: 31
|
Damn speedmaster bracelet!
I have resized many bracelets of many brands myself using my cheapo push pin remove from ebay for $5, however I cannot for the life of me remove the pins from the speedy. Time for a visit to the AD or my local mall watch repairer. Grrrrr ....... Speedy 1 Me 0 |
![]() |
![]() |
![]() |
#28 | |
2024 Pledge Member
Join Date: Oct 2010
Real Name: Mark B
Location: Austin, TX
Watch: 15400ST
Posts: 461
|
Quote:
|
|
![]() |
![]() |
![]() |
#29 |
"TRF" Member
Join Date: Jan 2011
Real Name: GMTII-C
Location: Nashville, TN
Watch: GSAR,Omega 3572.50
Posts: 68
|
Thanks for this. I added a link to my speedy 3572.50 no problem. I need to order another full link and both link pins to make it fit just right. Anyone know a good place to get one? Thanks
|
![]() |
![]() |
![]() |
#30 |
"TRF" Member
Join Date: Sep 2010
Location: Oregon
Watch: Rolex Submariner
Posts: 2
|
Just how much extra length do you get out of a half link?
My dealer made my bracelet exactly the length I asked for but it is just slightly too tight and irritates my wrist after about 4 hours of wear. It needs to be loosened slightly but I don't want it flopping around either. Just curious how much extra length I'll gain before I start tearing the thing apart. Thanks |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.