ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
17 October 2022, 06:57 AM | #1 |
"TRF" Member
Join Date: Oct 2022
Location: NY
Posts: 16
|
5513 Input Requested
Hello knowledgeable members
5513 example below is my late fathers, seeking input if it appears genuine, touched up, serviced etc... as the dial is peculiar to me (note I am still learning the ropes of vintage subs and the endless dial variations) He had this in his possession for quite some time, 30yrs+, not sure of its exact origins though. Movement is still functioning although the stem has rusted through from water damage. Serial 1.3xx.xxx, meters first, Swiss @ 6 marking appears to be chipped off, (similar chipping elsewhere on outside of dial as well) no underlines or exclamation dot, 660ft 6's appear to be closed, rounded crown guards, lume is quite strong, specs/flake on dial present from either lume or salt water damage. 1 bracelet appears to be a late 70s C&I rivet, other looks non genuine case opening tools enroute so I can take a peak at the case back info as well TIA |
17 October 2022, 07:01 AM | #2 |
2024 Pledge Member
Join Date: Oct 2018
Location: Colorado, USA
Posts: 6,132
|
I agree the dial looks strange, as does the flip-lock bracelet. Perhaps it is a service dial that I'm not familiar with, but I don't recognize it at first glance. I believe that 1.3M would originally have had a glossy dial with gilt print.
__________________
@oldwatchdan on IG |
17 October 2022, 07:40 AM | #3 |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: May 2008
Real Name: Matt
Location: Wine Country, Ca
Posts: 5,929
|
Dial looks like a bad relume job
__________________
TRF Member 11738 |
17 October 2022, 07:44 AM | #4 |
"TRF" Member
Join Date: Apr 2018
Real Name: Filipe
Location: Lisbon & Wadesdah
Watch: Never too many
Posts: 1,898
|
It has been serviced sometime, crystal is "service".
Maybe the OP can fine sand it and then polish it to get better images of the dial? |
17 October 2022, 07:49 AM | #5 |
2024 Pledge Member
Join Date: Oct 2018
Location: Colorado, USA
Posts: 6,132
|
I'm more concerned about the printing.
__________________
@oldwatchdan on IG |
17 October 2022, 10:17 AM | #6 |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: Dec 2011
Location: RedSox Nation
Watch: U Talkn Bout Wilis
Posts: 5,477
|
First off, how happy I would be to have my dad's watch - good for you, I mean it.
Dial looks refinished, surely relumed. To make it clean you would need a new dial, hands, and crystal. If it is 1,3xx,xxx then it had a gilt dial, which is long gone and going to be 5-15 grand to source a replacement. I know of a 1968 meter's first dial that would work (confirm it says 5513 and not 5512) and would be much closer to 2K. Going to need hands, going to need service. Insert is pretty nice even though it is one generation newer, was probably installed when the 77 C&I bracelet was added. I would be concerned about rust/water damage. If you are lucky that is just your dad's DNA. Sorry about your dad, very happy for you that you can bring a tactile memory around with you.
__________________
I'm a sailor peg. And I've lost my leg. Climbing up the top sails. I've lost my leg! |
17 October 2022, 12:06 PM | #7 |
"TRF" Member
Join Date: Oct 2022
Location: NY
Posts: 16
|
|
17 October 2022, 01:03 PM | #8 |
"TRF" Member
Join Date: Apr 2022
Location: USA
Watch: 5513, 16750, AK
Posts: 274
|
To the expertsare the hands the correct flat set for a gilt? I agree the dial isnt original.
The relumewhat type lume was used for the green glow under UV? Sent from my iPhone using Tapatalk |
17 October 2022, 02:28 PM | #9 |
"TRF" Member
Join Date: Jun 2013
Location: Australia
Posts: 1,552
|
agree with the others here.
1) dial 100% refinished 2) I think bezel insert, crown and hands were all replaced at a service at some point. That crown looks like a 702? Someone correct me. Orginal hands most likely had been gilt with that serial. 3) Sigificiant rust build up around the crystal means you should open up the caseback and check movement. Sometimes the rust can build up around the retaining ring under the bezel which may crept into the crystal over time especially if the crystal edges have cracked. In any event, get that checked as rust in movement will be hard to repair. |
17 October 2022, 02:42 PM | #10 |
"TRF" Member
Join Date: Jan 2016
Real Name: Mo
Location: Dubai
Watch: 1675 GMT, DRSD
Posts: 1,449
|
|
17 October 2022, 02:49 PM | #11 |
"TRF" Member
Join Date: Jan 2016
Real Name: Mo
Location: Dubai
Watch: 1675 GMT, DRSD
Posts: 1,449
|
No expert, but these hands don't seem flat to me. zinc sulfide lume is green under UV but these markers could be relumed.
|
17 October 2022, 03:45 PM | #12 |
"TRF" Member
Join Date: Jun 2013
Location: Australia
Posts: 1,552
|
|
19 October 2022, 07:38 AM | #13 |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: May 2011
Location: Great State of TX
Posts: 5,734
|
dial is definitely refinished/relumed. 2nd bracelet (fliplock one) is fake. Insert is awesome. Hard to judge hands from the pics. Case looks nice. As mentioned, you can find a decent (later) dial that won't break the bank if you're patient and get lucky.
__________________
Forty six & 2 are just ahead of me. Follow me on Instagram @ccrolex |
20 October 2022, 06:30 AM | #14 |
"TRF" Member
Join Date: Nov 2020
Location: Puerto Rico
Watch: 1968 5513 Sub
Posts: 450
|
According to mattedial.com for meters first dials
“the “6’s” in the depth rating are semi-open and to my eye appear that the top is rotated a couple degrees in the clockwise direction. I use the term semi-open here because it may take a 10X loupe to show that the “6’s” are in fact non closed.” These 6’s in the pics don’t look open to me. |
20 October 2022, 08:31 AM | #15 | |
"TRF" Member
Join Date: Jun 2013
Location: Australia
Posts: 1,552
|
Quote:
|
|
20 October 2022, 10:57 AM | #16 |
"TRF" Member
Join Date: Oct 2022
Location: NY
Posts: 16
|
Sorry for the delay, case back was seized and I was finally able to persuade it to open this evening!
seeing '65 date, '83 & '92 service, 26 jewel (26 imply movement was replaced previously?), and rust/water damage as suspected let me know what you guys can put together with the additional info as we collectively unravel the riddle Thanks to all who have contributed so far, your input is very much appreciated |
20 October 2022, 11:04 AM | #17 |
2024 Pledge Member
Join Date: Oct 2018
Location: Colorado, USA
Posts: 6,132
|
Your case serial number (1.3M) and case-back date (IV.65) are consistent.
__________________
@oldwatchdan on IG |
20 October 2022, 11:55 AM | #18 |
"TRF" Member
Join Date: Oct 2022
Location: NY
Posts: 16
|
dial close up, & the reason this one was shelved long ago, broken stem screw
|
20 October 2022, 12:36 PM | #19 |
2024 Pledge Member
Join Date: Oct 2018
Location: Colorado, USA
Posts: 6,132
|
I don't think I need to see any more photos of the front of the dial. It's 100% clear that it is repainted IMO. Really, it's up to you what you'd like to do regarding the dial. Wear it, refinish it, replace it. Take your time and give it some thought. I have a watch that I inherited from my father with a refinished dial, and I chose to just leave it as he wore it. However, yours is much more special and valuable as a watch.
__________________
@oldwatchdan on IG |
20 October 2022, 01:07 PM | #20 | |
"TRF" Member
Join Date: Apr 2022
Location: USA
Watch: 5513, 16750, AK
Posts: 274
|
Quote:
Your serial is consistent with my 5513, which is 1.28M and case back 3rd quarter 1965. Sent from my iPhone using Tapatalk |
|
20 October 2022, 01:12 PM | #21 | |
"TRF" Member
Join Date: Apr 2022
Location: USA
Watch: 5513, 16750, AK
Posts: 274
|
Quote:
With the crystal off, what are your thoughts on the hand set? Flat or curved? Is the seconds hand longer than the minute hand? Shouldnt both be 12mm? Sent from my iPhone using Tapatalk |
|
20 October 2022, 01:17 PM | #22 |
"TRF" Member
Join Date: Apr 2022
Location: USA
Watch: 5513, 16750, AK
Posts: 274
|
OP,
Do you have access to a Geiger? They are available on Amazon. Id be interested in seeing what it reads directly over the dial? Sent from my iPhone using Tapatalk |
21 October 2022, 02:17 PM | #23 | |
"TRF" Member
Join Date: Oct 2022
Location: NY
Posts: 16
|
Quote:
if anyones got one kicking around collecting dust, I can cover shipping back and forth if they are open to lending |
|
21 October 2022, 03:16 PM | #24 |
"TRF" Member
Join Date: Oct 2018
Location: US
Posts: 657
|
Sorry to say, but since you inquired, the dial appears to either be fake or redone
Sent from my iPhone using Tapatalk |
21 October 2022, 09:27 PM | #25 |
2024 Pledge Member
Join Date: Aug 2013
Location: The Empire State
Watch: Many
Posts: 3,447
|
I believe thats been established in more than a few previous posts.
|
21 October 2022, 10:10 PM | #26 | |
2024 Pledge Member
Join Date: Oct 2018
Location: Colorado, USA
Posts: 6,132
|
Quote:
__________________
@oldwatchdan on IG |
|
21 October 2022, 10:23 PM | #27 |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: May 2008
Real Name: Matt
Location: Wine Country, Ca
Posts: 5,929
|
Personally, since the watch is an heirloom; I would send it to the Ridleys and have it serviced since there is a ton of rust. They can source some hands and possibly revive the crystal and you can leave the dial in the meantime the way it is until you decide what to do. They will get the watch back into a wearable order without harming its collector value
__________________
TRF Member 11738 |
22 October 2022, 06:45 AM | #28 | |
"TRF" Member
Join Date: Apr 2022
Location: USA
Watch: 5513, 16750, AK
Posts: 274
|
Quote:
The reason I asked, I didnt see the point in getting a Geiger until a restoration expert asked me if my 5513 had been checked for radium. Didnt think it was possible, despite the sorry relume. Until it did. The relume on this watch reminds me of the radium relume on my 1965 5513. Sent from my iPhone using Tapatalk |
|
22 October 2022, 06:45 AM | #29 | |
"TRF" Member
Join Date: Apr 2022
Location: USA
Watch: 5513, 16750, AK
Posts: 274
|
Quote:
Concur on Phillip Ridley. Sent from my iPhone using Tapatalk |
|
22 October 2022, 07:21 AM | #30 | |
"TRF" Member
Join Date: Oct 2018
Location: US
Posts: 657
|
5513 Input Requested
Quote:
Theres a difference between reprinted, relumed and outright fake, which I wouldnt rule out from the pics. Thats why I shared my opinion and included as a possibility. Sent from my iPhone using Tapatalk |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.