![]() |
ROLEXROLEXROLEXROLEXROLEXROLEX
ROLEXROLEXROLEXROLEXROLEXROLEX
![]() |
#1 |
Member
Join Date: Mar 2006
Location: Fargo
Posts: 116
|
Decided to regulate my GMT
My new-used GMT that I just purchased was 5 years old and running around 15 seconds slow. I am assuming that it is probably due for a service but I figured what the hey. I will crack open the case of my $1000+ watch and jam some tools in there and see if I can fix it.
Before ![]() Grab the vise grip and crank off the back! ![]() Stick in the scredriver and turn it forward a few clicks. Couple shots of the guts before I shut her back up. ![]() ![]() All Done! Now mail it off to Omega to fix the damage! ![]() Just Kidding I Hope. ![]() |
![]() |
![]() |
![]() |
#2 |
"TRF" Life Patron
Join Date: Jun 2005
Real Name: Peter
Location: Llanfairpwllgwyng
Watch: ing you.
Posts: 52,817
|
Well the hardest part of regulating any watch is getting the back off.Check it for a few days for timing, before locking case back down tight.And its nice to see some movement decorationon a non view back watch.Its a pity Rolex could not do the same,even Geneva stripes would do.
__________________
ICom Pro3 All posts are my own opinion and my opinion only. "The clock of life is wound but once, and no man has the power to tell just when the hands will stop. Now is the only time you actually own the time, Place no faith in time, for the clock may soon be still for ever." Good Judgement comes from experience,experience comes from Bad Judgement,.Buy quality, cry once; buy cheap, cry again and again. www.mc0yad.club Second in command CEO and left handed watch winder ![]() |
![]() |
![]() |
![]() |
#3 |
"TRF" Member
Join Date: Jul 2005
Real Name: Chip
Location: Dallas TX
Posts: 6,194
|
that's a good looking movement! Very impressive for a non display back watch!
__________________
Try not. Do... or do not. There is no try. Yoda, Jedi Master CHIP Member # 87 ![]() |
![]() |
![]() |
![]() |
#4 |
Fondly Remembered
Join Date: May 2005
Real Name: JJ
Location: Auckland, NZ
Watch: ALL SOLD!!
Posts: 74,319
|
Hi Haj,
While you may think you've done a commendable job, you wouldn't have the equipment to test for waterproofing. Are you sure you're watch is now 100% water pressure tested? And are you 100% sure the seals on the case back are securely in place? You may need to take the watch over to an AD to have them check it out in a pressure testing unit just to make sure you've got the above right!! Cheers - JJ ![]()
__________________
Words fail me in expressing my utmost thanks to ALL of you for this wonderful support during my hour of need!! ![]() I firmly believe that my time on planet earth is NOT yet up!! I shall fight this to the very end.......and WIN!! |
![]() |
![]() |
![]() |
#5 |
"TRF" Member
Join Date: Aug 2005
Posts: 792
|
good advice from JJ.. given that the wath is 5 yrs old.. due for a service anyway
|
![]() |
![]() |
![]() |
#6 |
Member
Join Date: Mar 2006
Location: Fargo
Posts: 116
|
I do agree with you guys. I will probably send it in at the end of the summer. I was just doing it for the experience of doing it and to see how much difference it makes in the timing of the watch. Who knows if the thing is gummed up enough the adjustment might not make as much of a difference as it should.
I will post some timing results in a few days. ![]() Thanks again for the input. ![]() |
![]() |
![]() |
![]() |
#7 | |
Fondly Remembered
Join Date: May 2005
Real Name: JJ
Location: Auckland, NZ
Watch: ALL SOLD!!
Posts: 74,319
|
Quote:
JJ
__________________
Words fail me in expressing my utmost thanks to ALL of you for this wonderful support during my hour of need!! ![]() I firmly believe that my time on planet earth is NOT yet up!! I shall fight this to the very end.......and WIN!! |
|
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.