ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Lol-x · 20 June 2008, 10:51 AM

Out of curiosity I would like to know how Rolex or other watchmakers know if the gears in a watch are worn, or beyond service specifications.

The teeth on the gears must wear and I wonder if there is a gauge or measuring device that the watchmaker uses to determine if excessive wear & tear has occurred to the gears.

The sprockets on a bicycle wear out and the wear is clearly visible and the chain slips on the sprockets. However, in a Rolex the gears are so tiny and so I just wonder how a watchmaker determines if the gears just need to be cleaned and re-lubed or whether they need to be replaced

Photo originally from abbyclock.com

DSJ · 20 June 2008, 12:02 PM

Where's some of our watchmaker friends when you need them!??!

etp095 · 20 June 2008, 12:07 PM

i'm sure a micrometer and a well trained eye help in this matter,just a laymans response.

RW16610 · 20 June 2008, 12:10 PM

Quote:

Originally Posted by DSJ

Where's some of our watchmaker friends when you need them!??!

Yeah really. Something I would also like more details on.

MrClean · 20 June 2008, 12:19 PM

with any handheld instrument
there are optical devices, similiar to overhead projectors or projection TVs that you can place the object and a .002" dimension on an object is displayed on the screen as 1/2" so you can visually easily determine deviation or confirm tolerances, but doubt watchmakers use these - they might on the production floor of the manufacturing floor

but suspect the easiest measurement is by clocking the watch or timing it

just a guess, not a watchmaker

Lol-x · 20 June 2008, 12:34 PM

O.K. but if you timed the watch and found it to be gaining or losing time, how do you know which gear/s are worn and which are not, or whether the gain or loss is due to warn gears and not something else like the balance wheel needing adjustment?

Would the policy be to just replace all the gears, and if so, how many is that??

Damn I wish I knew the answers.

mickeydainish · 20 June 2008, 01:09 PM

....interesting thread Stevo.... I am keen to find out also... If I could be permitted to hazard a guess... For wear detection on those tiny gears, I would say it is more a visual inspection using magnification. The reason I say this is with such fine teeth and a small contact patch when meshed... evidence of wear and surface metal damage will be clear to a trained eye.... If a part is suspected....then further tests could be carried out??? Just my HO... I await the experts to enlighten us... :-)

Tools · 20 June 2008, 01:49 PM

Good Question:

Here are the parts that were just replaced in an overhaul of one of mine:

Let's see, I can make out the Stem Tube, Pallet Fork and Jewels, Winding Pinion, Center Wheel, Escape Wheel, Stem Detent and Stem, A bridge...and some other stuff..

None of it looks worn out to me........

This whole mess of stuff doesn't take up much more space than a shirt button..

dsimon9 · 20 June 2008, 01:59 PM

This is a wild guess on my part. But maybe two possibilities.

1. Maybe they check how much slack there is in the movement. I would expect the slack to increase as the parts wear down. If slack is still under specifications, then they assume everything is a-ok? If not then they dig deeper?

2. From tests and/or experience, they know which parts are subjected to the most wear and tear within a given movement. If those parts are within spec, then everything is a-ok?

If they indeed take the movement apart and check the specs in 100% of the parts, then imho they have the patience of a saint.

Maybe it is worth a quick trip to a local, independent Rolex repair shop and asking.

My $0.02 (if that) worth.

Dex

Vanessa CW21 · 20 June 2008, 02:16 PM

You guys are funny....

Okay, this is the deal. We use a very specific tool to inspect the gears, jewels and everything else in the watch! It's called .... a loupe!
Seriously, that's all we need. In extreme doubt I might use a jeweler's microscope, that can magnify up to 50X.
Most of the time the great wheel is worn, as well as the third wheel. In some occasions it's the second wheel or very rarely the escape wheel. Or a combination of any of these. The wear is clearly marked by grooves on the pivots, or a "flat" or "mushroom" shape. The balance staff can show the same grooves, and then it is impossible to regulate the watch within standards. The palletfork will in some cases show wear (=grooves) on the pallet stones, and this means the escape wheel teeth are bad as well. On the reversing wheels (the red ones) the wear is first visible on the back side.
Hope this explains it for you!

oneillba · 20 June 2008, 02:33 PM

Quote:

Originally Posted by Vanessa

You guys are funny....

Okay, this is the deal. We use a very specific tool to inspect the gears, jewels and everything else in the watch! It's called .... a loupe!
Seriously, that's all we need. In extreme doubt I might use a jeweler's microscope, that can magnify up to 50X.
Most of the time the great wheel is worn, as well as the third wheel. In some occasions it's the second wheel or very rarely the escape wheel. Or a combination of any of these. The wear is clearly marked by groves on the pivots, or a "flat" or "mushroom" shape. The balance staff can show the same groves, and then it is impossible to regulate the watch within standards. The palletfork will in some cases show wear (=grooves) on the pallet stones, and this means the escape wheel teeth are bad as well. On the reversing wheels (the red ones) the wear is first visible on the back side.
Hope this explains it for you!

Yeah, right... that is what I was about to say...

Thanks, Vanessa!

topcat30093 · 20 June 2008, 02:40 PM

Thank you Vanessa, for the explanation

Lol-x · 20 June 2008, 02:50 PM

Thanks very much Vanessa

I understand, so it comes down to the trained eye of the watchmaker and his/her skill and experience in judging what parts are worn and what parts should be replaced.

So the loupe is a very important tool, but without it I guess one couldn't really see anything. By far the most value is in the watchmaker's own ability to look at the movement and make a personal assessment of what is worn and what isn't. This can only come from proper training and years of learning and experience.

East Bay Rider · 20 June 2008, 02:51 PM

I was going to guess they use an optical comparator but Vanessa's explanation is so much better.

1MAC · 20 June 2008, 03:13 PM

My eyes are starting to cross just thinking about examining the inner workings of these fabulous little machines!

jac67 · 20 June 2008, 03:36 PM

Quote:

Originally Posted by Vanessa

We use a very specific tool to inspect the gears, jewels and everything else in the watch! It's called .... a loupe!

What is this "loupe" you talk about.

John.

BiG JeEzY · 20 June 2008, 03:48 PM

Quick question, what is one of the external signs of wear and tear on gears? Will a lower power reserve be a possible sign?

In other words, can you identify if the gears are worn or not without ever having to open up the caseback?

Vanessa CW21 · 20 June 2008, 04:24 PM

Quote:

Originally Posted by BiG JeEzY

Quick question, what is one of the external signs of wear and tear on gears? Will a lower power reserve be a possible sign?

In other words, can you identify if the gears are worn or not without ever having to open up the caseback?

There isn't always a sign that indicates worn parts...

The Rolex movements are so well made, that even when the watch is running dry and parts are getting damaged, it'll keep running! That's why so many people claim "they haven't serviced their watch in 20 years, and it runs perfect!" Yeah right, untill you look at it with a loupe!
I literally cringe when I hear somebody say something like that to me! I swear... It's like telling a doctor you've been smoking for 20 years and never had a physical, but feel fantastic! Once the x-rays view your lungs, it shows a different picture of your "great health"!

BiG JeEzY · 20 June 2008, 04:28 PM

Quote:

Originally Posted by Vanessa

There isn't always a sign that indicates worn parts...

The Rolex movements are so well made, that even when the watch is running dry and parts are getting damaged, it'll keep running! That's why so many people claim "they haven't serviced their watch in 20 years, and it runs perfect!" Yeah right, untill you look at it with a loupe!
I literally cringe when I hear somebody say something like that to me! I swear... It's like telling a doctor you've been smoking for 20 years and never had a physical, but feel fantastic! Once the x-rays view your lungs, it shows a different picture to your "great health"!

Thank you for the reply Vanessa! I will definitely make sure that I strictly follow the guidelines for servicing my watches. I think every 5-7 years is prefect for me.

I even heard of people who would service their watch TOO often on the contrary. They say every 3 years they service them. When I heard that, I thought there was no point. Because I felt, they are having their watch opened up more often then I feel its really necessary.

Vanessa CW21 · 20 June 2008, 04:31 PM

Quote:

Originally Posted by BiG JeEzY

Thank you for the reply Vanessa! I will definitely make sure that I strictly follow the guidelines for servicing my watches. I think every 5-7 years is prefect for me.

I even heard of people who would service their watch TOO often on the contrary. They say every 3 years they service them. When I heard that, I thought there was no point. Because I felt, they are having their watch opened up more often then I feel its really necessary.

3 years is a little much IMO but it certainly wouldn't harm the inside of the watch. What I would be worried about is the amount of times the watch gets an exterior polish!

JJ Irani · 20 June 2008, 05:36 PM

Quote:

Originally Posted by Vanessa

3 years is a little much IMO but it certainly wouldn't harm the inside of the watch. What I would be worried about is the amount of times the watch gets an exterior polish!

Agreed, Vanessa.....just look what happened to my dome!!

mickeydainish · 20 June 2008, 06:30 PM

Thanx Vanessa..... :-)

toph · 20 June 2008, 07:09 PM

Quote:

Originally Posted by jac67

What is this "loupe" you talk about.

John.

something like this, that you hold over your eye and it magnifies the watch or jewellery you are looking at- this one gives 14X the magnification

http://cgi.ebay.co.uk/ws/eBayISAPI.d...2BSI%26otn%3D4

SPACE-DWELLER · 20 June 2008, 10:25 PM

Quote:

Originally Posted by Vanessa

(...)Most of the time the great wheel is worn, as well as the third wheel.(...)

Thanks for the info, Vanessa!

Question: If either of the wheels is showing signs of excessive wear, they will be exchanged. But would the exchange of wheels be included in the service charge? Or would it cost extra to have worn out wheels exchanged for fresh ones?

DSJ · 21 June 2008, 12:06 AM

Vanessa, I was hoping you would weigh in - thanks for all the great information!

Tools · 21 June 2008, 12:26 AM

Good to see you giving us a bit more on the "inside story" V.

......

Vanessa CW21 · 21 June 2008, 01:54 AM

Quote:

Originally Posted by SPACE-DWELLER

Thanks for the info, Vanessa!

Question: If either of the wheels is showing signs of excessive wear, they will be exchanged. But would the exchange of wheels be included in the service charge? Or would it cost extra to have worn out wheels exchanged for fresh ones?

Replacing gears is part of the service cost because we usually cannot forsee all worn parts during the making of an estimate for the customer. Now, if I suspect the watch to have excessive wear because of the age, and knowing the history of "never been serviced" the cost will go up. The escapement and automatic wheels are substantially more expensive. Balance staff replacement cost quite a bit as well, and especially if it needs a complete new balance, because of a messed up hairspring...
There are many things we look at when doing the estimate and every watch is different.
On average I would say I replace 2 to 3 worn parts at no extra charge.
Sometimes I end up replacing the balance at no charge, and then I literally loose money on the repair, but it's about doing the right thing for the watch...

redshirt1957 · 21 June 2008, 01:57 AM

Quote:

Originally Posted by Vanessa

On average I would say I replace 2 to 3 worn parts at no extra charge.
Sometimes I end up replacing the balance at no charge, and then I literally loose money on the repair, but it's about doing the right thing for the watch...

If you will replace JJ's balance I will be more than glad to pick up the cost as a public service to the members.

Now, I will not discuss the other 2 or 3 worn parts!

Vanessa CW21 · 21 June 2008, 02:07 AM

Quote:

Originally Posted by redshirt1957

If you will replace JJ's balance I will be more than glad to pick up the cost as a pubic service to the members.

Now, I will not discuss the other 2 or 3 worn parts!

1MAC · 21 June 2008, 02:11 AM

Wow. Definitely a Freudian slip there Bubba.

20 June 2008, 12:02 PM	#2
DSJ "TRF" Member Join Date: Dec 2007 Real Name: David Location: USA Watch: your step! Posts: 7,882	Where's some of our watchmaker friends when you need them!??! __________________ Rolex. The Rolex of watches. 16570 Expy2 Noir, 116710 GMT Master II, 2552.80 SMP

20 June 2008, 12:07 PM	#3
etp095 "TRF" Member Join Date: Jan 2008 Real Name: rudolph Location: chicago burbs Posts: 2,026	i'm sure a micrometer and a well trained eye help in this matter,just a laymans response. __________________ tt date circa 69' 5513 circa 81' ss sub w/date (z) pepsi gmt for dad(D) polar expy II(z) 1675 gmt circa 68' ladies datejust on jubilee for mom (z) sea dweller16600(M) SS Sub-C(g) Omega Planet Ocean,45.5 on mesh(2500D)

20 June 2008, 12:19 PM	#5
MrClean Member Join Date: Mar 2008 Real Name: Larry Location: Virginia Watch: tudor 7928 Posts: 200	don't believe you're going to measure those teeth manually with any handheld instrument there are optical devices, similiar to overhead projectors or projection TVs that you can place the object and a .002" dimension on an object is displayed on the screen as 1/2" so you can visually easily determine deviation or confirm tolerances, but doubt watchmakers use these - they might on the production floor of the manufacturing floor but suspect the easiest measurement is by clocking the watch or timing it just a guess, not a watchmaker

20 June 2008, 12:34 PM	#6
Lol-x Facilitator Join Date: Nov 2005 Real Name: Steve Location: Omnipresent Posts: 33,462	O.K. but if you timed the watch and found it to be gaining or losing time, how do you know which gear/s are worn and which are not, or whether the gain or loss is due to warn gears and not something else like the balance wheel needing adjustment? Would the policy be to just replace all the gears, and if so, how many is that?? Damn I wish I knew the answers. __________________ *Most folks are about as happy as they make up their minds to be.* ~Abraham Lincoln Nothing compares to the simple pleasure of a bike ride. ~John F. Kennedy ROLEXploitation - yeah I'm a victim

20 June 2008, 01:49 PM	#8
Tools TRF Moderator & 2024 SUBMARINER Patron Join Date: May 2007 Real Name: Larry Location: Mojave Desert Watch: GMT's Posts: 43,459	Good Question: Here are the parts that were just replaced in an overhaul of one of mine: Let's see, I can make out the Stem Tube, Pallet Fork and Jewels, Winding Pinion, Center Wheel, Escape Wheel, Stem Detent and Stem, A bridge...and some other stuff.. None of it looks worn out to me........ This whole mess of stuff doesn't take up much more space than a shirt button.. __________________ (Chill ... It's just a watch Forum.....) NAWCC Member

20 June 2008, 01:09 PM	#7
mickeydainish Banned Join Date: Mar 2008 Real Name: Michael Location: LaLa Land Watch: Sub Date 16610 Posts: 1,757	....interesting thread Stevo.... I am keen to find out also... If I could be permitted to hazard a guess... For wear detection on those tiny gears, I would say it is more a visual inspection using magnification. The reason I say this is with such fine teeth and a small contact patch when meshed... evidence of wear and surface metal damage will be clear to a trained eye.... If a part is suspected....then further tests could be carried out??? Just my HO... I await the experts to enlighten us... :-)

20 June 2008, 01:59 PM	#9
dsimon9 Member Join Date: Apr 2008 Location: Colorado Posts: 284	This is a wild guess on my part. But maybe two possibilities. 1. Maybe they check how much slack there is in the movement. I would expect the slack to increase as the parts wear down. If slack is still under specifications, then they assume everything is a-ok? If not then they dig deeper? 2. From tests and/or experience, they know which parts are subjected to the most wear and tear within a given movement. If those parts are within spec, then everything is a-ok? If they indeed take the movement apart and check the specs in 100% of the parts, then imho they have the patience of a saint. Maybe it is worth a quick trip to a local, independent Rolex repair shop and asking. My $0.02 (if that) worth. Dex

20 June 2008, 02:16 PM	#10
Vanessa CW21 TechXpert & 2016 Patron Join Date: Aug 2007 Location: Mx Posts: 1,572	You guys are funny.... Okay, this is the deal. We use a very specific tool to inspect the gears, jewels and everything else in the watch! It's called .... a loupe! Seriously, that's all we need. In extreme doubt I might use a jeweler's microscope, that can magnify up to 50X. Most of the time the great wheel is worn, as well as the third wheel. In some occasions it's the second wheel or very rarely the escape wheel. Or a combination of any of these. The wear is clearly marked by grooves on the pivots, or a "flat" or "mushroom" shape. The balance staff can show the same grooves, and then it is impossible to regulate the watch within standards. The palletfork will in some cases show wear (=grooves) on the pallet stones, and this means the escape wheel teeth are bad as well. On the reversing wheels (the red ones) the wear is first visible on the back side. Hope this explains it for you! __________________ Member# 5731 Instagram: @vanessa.cw21 Watch my Rolex repair video: https://youtu.be/jDnaotCTpTA

20 June 2008, 02:40 PM	#12
topcat30093 "TRF" Member Join Date: Jan 2008 Real Name: Tony Location: England Posts: 5,437	Thank you Vanessa, for the explanation __________________

20 June 2008, 02:50 PM	#13
Lol-x Facilitator Join Date: Nov 2005 Real Name: Steve Location: Omnipresent Posts: 33,462	Thanks very much Vanessa I understand, so it comes down to the trained eye of the watchmaker and his/her skill and experience in judging what parts are worn and what parts should be replaced. So the loupe is a very important tool, but without it I guess one couldn't really see anything. By far the most value is in the watchmaker's own ability to look at the movement and make a personal assessment of what is worn and what isn't. This can only come from proper training and years of learning and experience. __________________ *Most folks are about as happy as they make up their minds to be.* ~Abraham Lincoln Nothing compares to the simple pleasure of a bike ride. ~John F. Kennedy ROLEXploitation - yeah I'm a victim

20 June 2008, 02:51 PM	#14
East Bay Rider "TRF" Member Join Date: Oct 2007 Real Name: Bill Location: East Bay RI Watch: GMT-II 16710LN Posts: 12,040	I was going to guess they use an optical comparator but Vanessa's explanation is so much better. __________________ I bought a cheap watch from the crazy man Floating down canal It doesn't use numbers or moving hands It always just says "now" Now you may be thinking that I was had But this watch is never wrong And if I have trouble the warranty said Breathe In, Breathe Out, Move On J. Buffett Instagram: eastbayrider46

20 June 2008, 03:13 PM	#15
1MAC "TRF" Member Join Date: Dec 2007 Real Name: Mike Location: Leawood, Kansas Watch: Submariner 16610 Posts: 854	My eyes are starting to cross just thinking about examining the inner workings of these fabulous little machines!

20 June 2008, 03:48 PM	#17
BiG JeEzY "TRF" Member Join Date: Jul 2007 Real Name: Jerome Location: N. California Watch: GMT I/EXP II/DJ Posts: 3,351	Quick question here.... Quick question, what is one of the external signs of wear and tear on gears? Will a lower power reserve be a possible sign? In other words, can you identify if the gears are worn or not without ever having to open up the caseback? __________________ -Rolex Explorer II Black dial 16570 (circa 2001) -Rolex GMT Master I Pepsi 1675 (circa 1978) -Rolex Datejust TT Champagne 16233 (circa 1991) -Vintage Longines Automatic La Grande Classique -Vintage Seiko 6138 Automatic Chronograph with "Kakume" Dial

20 June 2008, 06:30 PM	#22
mickeydainish Banned Join Date: Mar 2008 Real Name: Michael Location: LaLa Land Watch: Sub Date 16610 Posts: 1,757	Thanx Vanessa..... :-)

21 June 2008, 12:06 AM	#25
DSJ "TRF" Member Join Date: Dec 2007 Real Name: David Location: USA Watch: your step! Posts: 7,882	Vanessa, I was hoping you would weigh in - thanks for all the great information! __________________ Rolex. The Rolex of watches. 16570 Expy2 Noir, 116710 GMT Master II, 2552.80 SMP

21 June 2008, 12:26 AM	#26
Tools TRF Moderator & 2024 SUBMARINER Patron Join Date: May 2007 Real Name: Larry Location: Mojave Desert Watch: GMT's Posts: 43,459	Good to see you giving us a bit more on the "inside story" V. ...... __________________ (Chill ... It's just a watch Forum.....) NAWCC Member

21 June 2008, 02:11 AM	#30
1MAC "TRF" Member Join Date: Dec 2007 Real Name: Mike Location: Leawood, Kansas Watch: Submariner 16610 Posts: 854	Wow. Definitely a Freudian slip there Bubba.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)