![]() |
ROLEXROLEXROLEXROLEXROLEXROLEX
ROLEXROLEXROLEXROLEXROLEXROLEX
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
"TRF" Member
Join Date: Sep 2011
Location: UK
Posts: 728
|
Deteriorating Patek quality, need ideas to stop my brand new blue 5711 from rusting
I have read about the deteriorating quality of the new Patek’s so I thought I’d share my experience and ask for advice. I got my blue 5711 from AD in April, it has the new blue dial, but 324 movement so must have been one of the last of that configuration issued.
Everything was fine until recently I noticed some marks on the edge of the bracelet, closer inspection shows it seems to be rust. The watch has been stored in a watch box, worn a handful of times and never been wet. Has anyone else had this? Are Patek using a cheaper steel? I have known some low-grade stainless steel to rust but I never expected this. I took some pictures then used some WD40 to clean the links and it seems to have cleared it up, any thoughts on how to stop it getting worse |
![]() |
![]() |
![]() |
#2 |
"TRF" Member
Join Date: Jul 2014
Location: Washington, DC
Posts: 5,350
|
Interesting. Is that definitely rust?
|
![]() |
![]() |
![]() |
#3 | |
2024 Pledge Member
Join Date: May 2016
Location: UK
Posts: 4,203
|
Quote:
|
|
![]() |
![]() |
![]() |
#4 |
"TRF" Member
Join Date: May 2014
Location: united kingdom
Posts: 126
|
Not sure about the "rust", but those pin sleeves scream SEIKO, if that's any indication of the quality of their bracelets.
|
![]() |
![]() |
![]() |
#5 |
2024 Pledge Member
Join Date: Jan 2018
Real Name: Michael
Location: Dotonbori
Watch: Mostly blue dials
Posts: 7,856
|
Can stainless steel rust under normal conditions after just a couple of months?
|
![]() |
![]() |
![]() |
#6 |
"TRF" Member
Join Date: Sep 2011
Location: UK
Posts: 728
|
|
![]() |
![]() |
![]() |
#7 |
"TRF" Member
Join Date: Oct 2007
Location: DC Area, USA
Watch: IIc,1680 Red,16660
Posts: 4,492
|
Deteriorating Patek quality, need ideas to stop my brand new blue 5711 from rusting
A cursory Google image search seems to show two bracelet configurations - one with recesses in the screw/pin holes on the side of the bracelet like your photo, and one with screw heads like the photo below. I don’t know if both could be correct depending on the vintage - perhaps someone with more knowledge can chime in?
![]() Sent from my iPhone using Tapatalk |
![]() |
![]() |
![]() |
#8 | |
2024 Pledge Member
Join Date: May 2016
Location: UK
Posts: 4,203
|
Quote:
https://www.patek.com/en/company/sav...-and-bracelets |
|
![]() |
![]() |
![]() |
#9 |
"TRF" Member
Join Date: Sep 2011
Location: UK
Posts: 728
|
I have cleaned the bracelet with a little WD40 and gentle rub with a finger nail. Perhaps a clean with soap and water and see if the rust comes back. If it does I will take to the AD but not sure what the AD or Patek can do if its rusting. I guess they all must be the same.
|
![]() |
![]() |
![]() |
#10 |
"TRF" Member
Join Date: Aug 2011
Real Name: Josh
Location: Lost in time
Watch: Me Nae Nae
Posts: 9,821
|
Wow how in the world does a Patek rust?? Is this for real?
__________________
"Sometimes the songs that we hear are just songs of our own." -Jerome J. Garcia, Robert C. Hunter ![]() |
![]() |
![]() |
![]() |
#11 |
"TRF" Member
Join Date: Mar 2014
Location: Virginia
Posts: 816
|
Lol, that’s not what I’d expect from Patek. Unreal.
|
![]() |
![]() |
![]() |
#12 |
"TRF" Member
Join Date: Mar 2019
Location: Watch Town
Posts: 305
|
This is interesting. I have a few steel Patek watches that are old and have been worn in many summers and have gotten wet and sweaty and none have ever rusted. I have a new 5960 in steel and it has seen daily wear and has gotten wet and sweaty and it has never rusted either. If that is truly rust and the fact that it is in the side, would make me investigate how it’s being stored and what the side of the bracelet is being exposed to?
|
![]() |
![]() |
![]() |
#13 | |
2024 Pledge Member
Join Date: May 2016
Location: UK
Posts: 4,203
|
Quote:
|
|
![]() |
![]() |
![]() |
#14 | ||
Banned
Join Date: Aug 2009
Location: usa
Posts: 6,765
|
Quote:
I'm still skeptical that it's rust. Stainless can discolor from other things. My wife and I went back to the store our silverware came from because, oh the horror, it was rusting after mere months! The salesman told us it wasn't in fact rust, but that it needed to be polished with stainless cleaner. Low and behold, he was correct. That said, I would seek the advice of your AD, or PP, about whether such a cleaner should be applied to a watch. They can be very abrasive. Quote:
That photo isn't a 5711. Chronograph pushers visible (and different case back). I'm guessing that a thicker watch can accommodate a thicker bracelet, allowing for thicker screws/pins. |
||
![]() |
![]() |
![]() |
#15 |
"TRF" Member
Join Date: Sep 2011
Location: UK
Posts: 728
|
I feel I need to add more detail, it has happened twice, the first time a week ago I just rubbed the mark away with a finger. The second time as in the pictures was much worse so cleaned and oiled it. I know that WD40 has a rust inhibitor in it, I didn’t want the steel to start pitting and ruin the finish as its brand new.
The watch is always stored crown up in a nice clean blue velvet watch box on its own. The marks were on both sides. I am sure its rust, I had to wait a month to get it resized as it was too small, I only wore the watch out a few times walking round town in dry weather. The fact it is showing in several places as circles on the fixed link edges seems to suggest its rust, unless it is something used to assemble the bracelet seeping out. It looks like corrosion/rust to me and needed a fair amount of rubbing with a finger nail and WD40 to remove. I was expecting others to have had the same issue, now I’m thinking I should I try to clean off the WD40 oil and get it to rust again and return the watch to Patek. |
![]() |
![]() |
![]() |
#16 |
Banned
Join Date: Feb 2009
Location: USA
Posts: 530
|
Wow did not expect this from Patek. email the pics to the AD and Patek service and ask them to replace the bracelet immediately. Rust is like cancer and will come back and it can spread to the case unless you keep oiling with WD40, and that is NOT something you should have to do with a watch at this price... or even an $800 Tag :(
|
![]() |
![]() |
![]() |
#17 |
2024 Pledge Member
Join Date: Apr 2013
Location: USA
Posts: 1,056
|
Take a look at this Royal Oak bracelet video, which I'm assuming is very similar to a Nautilus bracelet: https://youtu.be/Bh1Xww576Yc
They push solid steel pins through, grind them down, then laser weld before polishing again. To me, it looks like your "rust" is right where the pins would be, especially given their circular shape. My guess would be either a defect in the pin steel, or the welding. Either way -- I would definitely take it back to your AD or Patek directly! |
![]() |
![]() |
![]() |
#18 |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: Jan 2010
Real Name: K.
Location: 780
Posts: 10,433
|
![]() |
![]() |
![]() |
![]() |
#19 |
"TRF" Member
Join Date: Mar 2011
Location: N/A
Watch: the girls
Posts: 7,095
|
I think PP will replace it for you with pleasure ,those marks looks really ugly BTW.
__________________
Best George "Also remember that feet don't get fat and a watch will always speak volumes." Robert Johnston --------------------- *new*https://youtu.be/EljAF-uddhE *new * http://youtu.be/ZmpLoO1Q8eQ IG @passionata1 |
![]() |
![]() |
![]() |
#20 |
Member
Join Date: Jul 2014
Real Name: Roger
Location: ...
Watch: AP/Rolex/PP
Posts: 6,309
|
Of all my watches - I’ve never had one rust. I would have gone right back to my AD once I noticed and would have done nothing else.
Sent from my iPhone using Tapatalk |
![]() |
![]() |
![]() |
#21 |
Banned
Join Date: May 2019
Location: Dubai
Posts: 79
|
Whilst it's been stored in a watch box is there any chance it's been in contact with another metal object? Really bizarre to rust as I even swim with my watches and never had a problem
|
![]() |
![]() |
![]() |
#22 |
"TRF" Member
Join Date: Sep 2017
Location: Northern Monkey
Posts: 478
|
Stainless Steel doesn't rust.
What it looks like to me is cross contamination from a metal that rusts ie, mild steel. All it takes is for a tiny steel particle to land on your watch and that rusts which will then lead to discolouration of the St St. |
![]() |
![]() |
![]() |
#23 |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: Mar 2013
Location: usa
Posts: 19,359
|
What the
Return ASAP |
![]() |
![]() |
![]() |
#24 |
"TRF" Member
Join Date: Aug 2017
Location: Germany
Watch: BLRO
Posts: 161
|
Looks like wrong steel type in the pins built a galvanic pair with the bracelet steel, in this case even stainless steel can rost. Another possibility the welder forgot to wash out the welding flux (not sure it is used at all though) and it’s coming through.
|
![]() |
![]() |
![]() |
#25 |
"TRF" Member
Join Date: Jul 2007
Location: Sunderland
Posts: 1,284
|
The one I got six years ago did not rust, I would say it’s being caused by the pins, they must be using a different grade today, I use the pin and collar system on my watch bracelets and have had emails from customers calling me a cheapskate! Mine are £44!
Sent from my iPhone using Tapatalk
__________________
Instagram @scurfawatches |
![]() |
![]() |
![]() |
#26 | |
Banned
Join Date: Aug 2009
Location: usa
Posts: 6,765
|
Quote:
I would take it back immediately and request a new bracelet. The last thing you want is for a pin to rust through and your watch to pop off! |
|
![]() |
![]() |
![]() |
#27 |
2024 Pledge Member
Join Date: Nov 2012
Real Name: Steven
Location: Glocal
Posts: 20,427
|
Weird! My 5167 never rusted and it was a true daily beater. Yes the lume fell out of the '1' on the '10' dial marker. We all know many modern Pateks are lower quality than when they adhered to the Geneva Seal, yet rust is very strange.
Let us hope this is an anomaly and not the new norm for those who truly wear and use their Patek timepieces.
__________________
__________________ Love timepieces and want to become a Watchmaker? Rolex has a sensational school. www.RolexWatchmakingTrainingCenter.com/ Sent from my Etch A Sketch using String Theory. |
![]() |
![]() |
![]() |
#28 |
"TRF" Member
Join Date: Jun 2017
Location: Los Angeles
Watch: 3970
Posts: 3,838
|
Unacceptable!
|
![]() |
![]() |
![]() |
#29 |
"TRF" Member
Join Date: Jun 2016
Location: USA
Watch: Rolex & Patek
Posts: 1,436
|
Maybe it's spaghetti sauce, taste it??
Kidding kidding! I wouldn't clean it with anything abrasive, just take it to the AD to have it cleaned. If it's still there after then ask for it to be replaced. It's under warranty. |
![]() |
![]() |
![]() |
#30 |
"TRF" Member
Join Date: Sep 2011
Location: San Francisco, CA
Watch: this space
Posts: 1,867
|
That's shocking. I would not have taken WD-40 to such an expensive watch. Doesn't your wrist get greasy??? By the way, I was under the impression stainless steel was so named because it does not rust.
__________________
![]() |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 3 (0 members and 3 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.