ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
|
20 August 2015, 02:47 PM | #1 |
"TRF" Member
Join Date: Sep 2014
Location: Wales
Posts: 635
|
A bit disappointed..
My DJ II is only eight months old but it started losing about six minutes a day since the start of the week. Before that it used to run about + 1-2 secs a day.
I haven't done anything differently with the watch other than it sat in a safe for 3 weeks whilst I was on vacation. I use it on rotation with my BLNR using it during the week when I wear a suit and then the BLNR on evenings and weekends. I would give it a full wind when I put it back on at the start of the week and had no issues until now. Anyway, I dropped it off at the local service centre last night and they are going to keep it for 3-4 days to test and observe it. I hope that this is a quick fix but I am resigned to losing it for several weeks. I suppose I could look on the bright side as this may give my speedmaster the opportunity for some wrist time as it has hardly been out of the watch box the last 12 months. |
20 August 2015, 03:02 PM | #2 |
2024 Pledge Member
Join Date: Oct 2014
Real Name: Chadri
Location: LI, NY
Watch: 116610LV
Posts: 11,357
|
Strange! Maybe magnetized?
Seems like you have it handled, and RSC will take good care. Keep us updated, best of luck and enjoy that speedy! ;) |
20 August 2015, 09:25 PM | #3 |
"TRF" Life Patron
Join Date: Jun 2005
Real Name: Peter
Location: Llanfairpwllgwyng
Watch: ing you.
Posts: 53,041
|
Lets get things perfectly straight about any watch that shows signs of being magnetised.First in general they will run very very erratic speed up normally and not by a couple of seconds minutes or even hours or stop and refuse to start.In general most timing errors is simply down to how the owner was testing plus the state of power reserve in the mainspring.There is no reason for any watch to start losing time just because its not been worn for a few weeks.Its possible the movement could have been stopped for many months before it was sold and its not magnetised that's for sure.
__________________
ICom Pro3 All posts are my own opinion and my opinion only. "The clock of life is wound but once, and no man has the power to tell just when the hands will stop. Now is the only time you actually own the time, Place no faith in time, for the clock may soon be still for ever." Good Judgement comes from experience,experience comes from Bad Judgement,.Buy quality, cry once; buy cheap, cry again and again. www.mc0yad.club Second in command CEO and left handed watch winder |
20 August 2015, 09:02 PM | #4 |
2024 Pledge Member
Join Date: Apr 2013
Location: Indianapolis
Watch: Patek-Philippe
Posts: 16,832
|
I hope they do a quick turn around for you.
__________________
Rolex and Patek Philippe |
20 August 2015, 09:06 PM | #5 |
2024 SubLV41 Pledge Member
Join Date: Mar 2010
Location: Paris, France
Posts: 35,262
|
sorry to hear. at least it will come back better than ever.
|
20 August 2015, 09:16 PM | #6 |
"TRF" Member
Join Date: Jan 2009
Real Name: Larry
Location: Kentucky
Watch: Yes
Posts: 35,011
|
Here's hoping for a quick fix...
|
20 August 2015, 09:19 PM | #7 |
TRF Moderator & 2024 SubLV41 Patron
Join Date: Apr 2012
Real Name: Tim
Location: Pennsylvania
Watch: 14060M
Posts: 72,158
|
Very disappointing but it's a machine and these things unfortunately happen. Hopeful it will be an easy quick fix. Enjoy the Omega for now, keep us posted.
__________________
Rolex Submariner 14060M Omega Seamaster 2254.50 DOXA Professional 1200T Card carrying member of TRF's Global Association of Retro-Grouch-Curmudgeons TRF's "After Dark" Bar & NightClub Patron P Club Member #17 2 FA ENABLED
|
20 August 2015, 11:11 PM | #8 |
2024 SubLV41 Pledge Member
Join Date: Jul 2013
Real Name: Brian (TBone)
Location: canada
Watch: es make me smile
Posts: 77,873
|
Hope they get to the root and the problem quickly
|
21 August 2015, 12:55 PM | #9 |
"TRF" Member
Join Date: Feb 2012
Real Name: Lance
Location: Nashville, TN
Watch: rolex
Posts: 1,076
|
Bummer
|
21 August 2015, 01:19 PM | #10 |
"TRF" Member
Join Date: Apr 2008
Real Name: Tom
Location: In a race car!
Watch: ME RACE PORSCHES
Posts: 24,123
|
Assuming watch is getting a full wind ?
|
21 August 2015, 03:20 PM | #11 |
"TRF" Member
Join Date: Sep 2014
Location: Wales
Posts: 635
|
I fully wound the watch on Sunday morning and wore to work. I noticed Monday morning that it was running 6 mins slow. I wore the watch on Monday at work and regularly checked the time against time.is through the day and could see that the watch was losing time. I decided to let the watch run down and re-wind to see if this fixed it. By Tuesday morning the watch was running about 13 mins slow. The watch stopped about 3 pm on Wednesday afternoon (which was about 48 hours after i it put back in the watch box). I then gave a full rewind (40 full turns) reset the time and wore the watch for about an hour then checked against time.is again and sadly noted that it had lost about 17 secs. So I immediately took it to the service centre for them to look at.
I should hear back from them on Sunday or Monday. |
23 August 2015, 02:45 PM | #12 |
"TRF" Member
Join Date: Sep 2014
Location: Wales
Posts: 635
|
So I got the watch back yesterday evening. The guy in the service centre didn't speak very good English so I am not exactly sure what was wrong with it. Only words I could make out was that it had been "balanced" and "cleaned". Anyway it's back on the wrist today. I set the time yesterday and as of this morning zero seconds lost.
|
23 August 2015, 03:29 PM | #13 |
"TRF" Member
Join Date: Jul 2014
Location: Australia
Posts: 853
|
That's a good news!
Sent from my iPhone using Tapatalk |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.