ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
|
7 April 2018, 10:26 PM | #1 |
Banned
Join Date: Jan 2008
Real Name: Anastasios
Location: Athens Greece
Watch: Rolex GMT 1675
Posts: 8,497
|
FS: Rolex 114060 Submariner Bracelet Double Spring Bar Removal Tool
This tool is made specifically for spring bar pins and help install watch bracelets
and bands of new (or used) watch cases. The width of these pliers adjusts to fit bands from 10 mm to 30 mm, and by just turning a screw you can lock the pliers in the specific size you need for your repair. It features two reversible, stainless steel forks to grip the bracelet. There are notches allowing you to position the forks anywhere from 0 to 45º degree angles. Choose from the standard or the fine tips. The standard tips measure 1.30mm wide with 0.33mm point diameter. The fine tips measure 1.10mm wide with 0.23mm point diameter. Width adjusts from 10 to 30 mm Locks by turning a screw Notches for fork position from 0 to 45º degree angles Reversible Stainless Steel forks Choose from 1.10mm or 1.3mm fork width Product size 3.8" X 1.6" X 0.4" Inches (95 X 40 X 9mm) Comes with 4 double forks Prior to using the springbar tool to release the bracelet from the case (?) Separate the bracelet from the clasp using a small pin so the bracelet can lay flat on the table/bench After separating the bracelet from the clasp, mask off the lug with either masking tape, Line up the straight edge of the tape with the edge of the lug. The masking tape will help prevent springbar scratches. Extremely affordable Before using the Rolex bracelet removal tool, be sure to adjust the set of screws so the tongs are just wider than the solid end link. Doing so will prevent the tongs from scratching the case just in case the tongs slip from the springbar shoulders. Insert the tool around the narrow part of the clasp hinge on the 6:00 o'clock side of the watch. Starting at the 12:00 o'clock side is kind of hard as the tool has to navigate around the wider part of the clasp hinge - So start at 6 Squeeze both sides equally insuring that the springbar is fully compressed together. Once compressed slide the watch head away from the solid end link. To refit, start with the 12:00 o'clock side if the bracelet. Squeeze both sides equally insuring that the springbar is fully compressed, and keep the solid end link stationary on the work surface and slide the watch head into the solid end link Nir the otherway around Carefully fit the watch head into the solid end link. Once the 12:00 o'clock side watch head is backed into the solid end link, release the tool and move the end link so that the springbars fully fit into the holes. Essentially, keep the solid end link stationary, and back the watch head into SEL. Slide the end link around such that the springbars snap into the holes. You should hear it click into place. Follow the same steps for the 6:00 o'clock side, installing the 6 o'clock side last is easier as there is more room to maneuver with the skinnier part of the bracelet clasp hinge. Price $45.- Includes shipping and insurance within USA Pay Me PayPal Gift text me +1 954.892.9291 Email me: tempoking@yahoo.com I am in SE Florida [/QUOTE] [/QUOTE] |
11 April 2018, 07:29 AM | #2 |
Banned
Join Date: Jan 2008
Real Name: Anastasios
Location: Athens Greece
Watch: Rolex GMT 1675
Posts: 8,497
|
Available
|
17 April 2018, 05:01 AM | #3 |
Banned
Join Date: Jan 2008
Real Name: Anastasios
Location: Athens Greece
Watch: Rolex GMT 1675
Posts: 8,497
|
Many available
|
23 April 2018, 12:32 AM | #4 |
Banned
Join Date: Jan 2008
Real Name: Anastasios
Location: Athens Greece
Watch: Rolex GMT 1675
Posts: 8,497
|
Great opportunity
|
25 April 2018, 11:53 PM | #5 |
Banned
Join Date: Jan 2008
Real Name: Anastasios
Location: Athens Greece
Watch: Rolex GMT 1675
Posts: 8,497
|
Great opportunity
|
30 June 2018, 06:04 PM | #6 |
Banned
Join Date: Jan 2008
Real Name: Anastasios
Location: Athens Greece
Watch: Rolex GMT 1675
Posts: 8,497
|
Nice Tool to have !
|
3 July 2018, 10:00 AM | #7 |
Banned
Join Date: Jan 2008
Real Name: Anastasios
Location: Athens Greece
Watch: Rolex GMT 1675
Posts: 8,497
|
Nice Tool to have !
|
12 July 2018, 07:55 PM | #8 |
Banned
Join Date: Jan 2008
Real Name: Anastasios
Location: Athens Greece
Watch: Rolex GMT 1675
Posts: 8,497
|
The...Tool
|
14 July 2018, 11:42 PM | #9 |
Banned
Join Date: Jan 2008
Real Name: Anastasios
Location: Athens Greece
Watch: Rolex GMT 1675
Posts: 8,497
|
Wholesale available
Minimum 50 pieses !! |
17 July 2018, 08:49 AM | #10 |
Banned
Join Date: Jan 2008
Real Name: Anastasios
Location: Athens Greece
Watch: Rolex GMT 1675
Posts: 8,497
|
Fun tool to own
|
25 July 2018, 10:17 AM | #11 |
Banned
Join Date: Jan 2008
Real Name: Anastasios
Location: Athens Greece
Watch: Rolex GMT 1675
Posts: 8,497
|
Tool available for wholesale
|
27 July 2018, 04:12 PM | #12 |
Banned
Join Date: Jan 2008
Real Name: Anastasios
Location: Athens Greece
Watch: Rolex GMT 1675
Posts: 8,497
|
Tool
|
31 July 2018, 04:47 PM | #13 |
Banned
Join Date: Jan 2008
Real Name: Anastasios
Location: Athens Greece
Watch: Rolex GMT 1675
Posts: 8,497
|
The tool
|
4 August 2018, 05:05 PM | #14 |
Banned
Join Date: Jan 2008
Real Name: Anastasios
Location: Athens Greece
Watch: Rolex GMT 1675
Posts: 8,497
|
Nice Tool to have !
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.