ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Japan · 20 April 2011, 12:42 AM

I am thinking about doing this on a submariner no-date. The crown should be on the left side after the modification. Before I void the warranty for this modification, does anyone know if it can be done?

PhilM · 20 April 2011, 12:50 AM

Can't be done, the problem is with the dial and the position of the feet and that it has to sit in a particular position

Japan · 20 April 2011, 01:06 AM

Is it that the dial is not round or are the dial feet not 180 degree opposite to each other?

PhilM · 20 April 2011, 01:13 AM

No the dial is round, that part is fine, but the feet are not at say 3 and 9, they will be in diffrent locations.

Edit: You will need to check on the particular model, as I'm not 100% sure.

Although Rolex will not touch the watch once you have done this.

MonBK · 20 April 2011, 01:14 AM

It can and has been done but better left to an expert.

PhilM · 20 April 2011, 01:53 AM

Quote:

Originally Posted by MonBK

It can and has been done but better left to an expert.

Sorry but it really depends on the Sub reference, as not all have the same dial configuration.

The OP hasn't even posted this.

Johny · 28 April 2011, 12:18 AM

Quote:

Originally Posted by MonBK

It can and has been done but better left to an expert.

x2 agree.

Japan · 20 April 2011, 02:14 AM

I am looking at a 14060M. I understand this would void the warranty so has to make sure that it can be done first.

Taxi! · 21 April 2011, 11:39 AM

Here's a pic from another thread, although this is a 14060:

http://www.rolexforums.com/showthread.php?t=159394

20 April 2011, 12:42 AM	#1
Japan "TRF" Member Join Date: Apr 2011 Location: Japan Posts: 3	Rotate dial 180 degree for a lefty I am thinking about doing this on a submariner no-date. The crown should be on the left side after the modification. Before I void the warranty for this modification, does anyone know if it can be done?

20 April 2011, 12:50 AM	#2
PhilM "TRF" Member Join Date: Nov 2007 Real Name: Phil Location: London Watch: Sea-Dweller Posts: 1,765	Can't be done, the problem is with the dial and the position of the feet and that it has to sit in a particular position

20 April 2011, 01:06 AM	#3
Japan "TRF" Member Join Date: Apr 2011 Location: Japan Posts: 3	Is it that the dial is not round or are the dial feet not 180 degree opposite to each other?

20 April 2011, 01:13 AM	#4
PhilM "TRF" Member Join Date: Nov 2007 Real Name: Phil Location: London Watch: Sea-Dweller Posts: 1,765	No the dial is round, that part is fine, but the feet are not at say 3 and 9, they will be in diffrent locations. Edit: You will need to check on the particular model, as I'm not 100% sure. Although Rolex will not touch the watch once you have done this.

20 April 2011, 01:14 AM	#5
MonBK Banned Join Date: Nov 2010 Location: Kingstown Posts: 58,279	It can and has been done but better left to an expert.

20 April 2011, 02:14 AM	#8
Japan "TRF" Member Join Date: Apr 2011 Location: Japan Posts: 3	I am looking at a 14060M. I understand this would void the warranty so has to make sure that it can be done first.

21 April 2011, 11:39 AM	#9
Taxi! Member Join Date: Dec 2010 Location: South Florida Posts: 37	Here's a pic from another thread, although this is a 14060: http://www.rolexforums.com/showthread.php?t=159394

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)