ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

mjclark32 · 29 February 2012, 02:08 AM

I wear my sub everyday no matter what I may be doing. Thus, some scratches find their way onto the bracelet. No big deal for a couple of bucks you can pick up the necessary supplies to get them out and in a few minutes your bracelet can look as good as new (well almost).
Below is a pictorial of my latest rebrushing and cleaning. I ultrasonic my bracelet every 2-3 months and rebrush it a little less often. I don't touch the actual watch case, I'll let the pros handle that at service time. Cheers!

Rolex Rolex · 29 February 2012, 06:04 AM

good job >>>

mjclark32 · 29 February 2012, 06:14 AM

Quote:

Originally Posted by Rolex Rolex

good job >>>

Thanks

masterserg · 29 February 2012, 06:06 AM

Looks brand new. Good job!

I recommend some Veraet for weekly maintenance.

mjclark32 · 29 February 2012, 06:08 AM

Quote:

Originally Posted by masterserg

Looks brand new. Good job!

I recommend some Veraet for weekly maintenance.

Thanks. Agreed. I use it every week or couple days depending on my activity

Puffy · 29 February 2012, 07:26 PM

very good job!

nim · 4 March 2012, 01:06 AM

Nice..

DDG · 4 March 2012, 02:27 AM

And no matter what type of abrasive you use to re-grain the bracelet, it's going to leave a microscopic abrasive dust that will find it's way into the pins & holes. It would be a real good idea to lay it on edge in the ultrasonic again for a few minutes when you're done.

handsfull · 4 March 2012, 11:22 AM

Quote:

Originally Posted by DDG

And no matter what type of abrasive you use to re-grain the bracelet, it's going to leave a microscopic abrasive dust that will find it's way into the pins & holes. It would be a real good idea to lay it on edge in the ultrasonic again for a few minutes when you're done.

Good call.....makes sense!

mjclark32 · 6 March 2012, 09:28 AM

Quote:

Originally Posted by DDG

And no matter what type of abrasive you use to re-grain the bracelet, it's going to leave a microscopic abrasive dust that will find it's way into the pins & holes. It would be a real good idea to lay it on edge in the ultrasonic again for a few minutes when you're done.

Agreed, sorry pics are out of order. Ultra sonic was the last step before being put back together

Rags · 6 March 2012, 10:26 AM

Great job. I use a scotch brite pad & a 000 steel wool pad to finish..

mjclark32 · 6 March 2012, 10:36 AM

Quote:

Originally Posted by Puffy

very good job!

Quote:

Originally Posted by nim

Nice..

Quote:

Originally Posted by Rags

Great job. I use a scotch brite pad & a 000 steel wool pad to finish..

Thanks gents.

ec51 · 19 March 2012, 02:34 AM

Looks like we have some of the same supplies:

The Amateur DIY Workshop

Well done!

If you were to get the Varaet, I would say you wouldn't need to ultrasonic as much. I use the Varaet for in-between cleanings and the solution works great with a toothbrush.

mjclark32 · 25 March 2012, 08:50 PM

Quote:

Originally Posted by ec51

Looks like we have some of the same supplies:

The Amateur DIY Workshop

Well done!

If you were to get the Varaet, I would say you wouldn't need to ultrasonic as much. I use the Varaet for in-between cleanings and the solution works great with a toothbrush.

Thanks. I use varaet and a toothbrush as a weekly cleaning solution and it does work great.

Kingair · 25 March 2012, 07:27 PM

Great post !

kkim1020 · 30 March 2012, 07:17 AM

What works even better than scotch pads are those manicure nail buffing tools.

jso305 · 11 April 2012, 12:45 PM

i love vereat!!!

vitix · 11 April 2012, 01:54 PM

Awesome! I do the same with mine every 6 or 8 months!

Sent from my iPad2 using Tapatalk

FGorni · 12 April 2012, 11:17 PM

One time try this one for brushing

http://www.ebay.it/itm/10PC-SCOTCHBR...#ht_881wt_1397

you will not be disappointed, just my 2 cents

29 February 2012, 02:08 AM	#1
mjclark32 "TRF" Member Join Date: Mar 2010 Real Name: MJC Location: PHL USA Watch: IWC, Rolex, AP Posts: 29,232	Cleaning and rebrushing my 16610's bracelet I wear my sub everyday no matter what I may be doing. Thus, some scratches find their way onto the bracelet. No big deal for a couple of bucks you can pick up the necessary supplies to get them out and in a few minutes your bracelet can look as good as new (well almost). Below is a pictorial of my latest rebrushing and cleaning. I ultrasonic my bracelet every 2-3 months and rebrush it a little less often. I don't touch the actual watch case, I'll let the pros handle that at service time. Cheers! Attached Images __________________

29 February 2012, 06:06 AM	#4
masterserg "TRF" Member Join Date: Jul 2011 Real Name: Serg Location: US of A Watch: AP Posts: 7,437	Looks brand new. Good job! I recommend some Veraet for weekly maintenance. __________________ How can you have any pudding if you don't eat yer meat????

29 February 2012, 07:26 PM	#6
Puffy "TRF" Member Join Date: Oct 2009 Location: Here and there Posts: 12,485	very good job! __________________ Fine Quality is Long Remembered After the Pain of Spending Money is Forgotten

6 March 2012, 10:26 AM	#11
Rags 2025 Pledge Member Join Date: Jan 2009 Real Name: Chuck Location: SW Florida Watch: 16233,16610,214270 Posts: 11,200	Great job. I use a scotch brite pad & a 000 steel wool pad to finish.. __________________ 16233 Y Serial Datejust 16610 Z Serial Submariner 214270 Explorer *114300 Oyster Perpetual* *76200 Tudor Date+Day*

29 February 2012, 06:04 AM	#2
Rolex Rolex "TRF" Member Join Date: Oct 2011 Location: Dubai Posts: 323	good job >>>

4 March 2012, 01:06 AM	#7
nim Member Join Date: Jan 2012 Location: singapore Watch: cosmograph daytona Posts: 388	Nice..

4 March 2012, 02:27 AM	#8
DDG Member Join Date: Jan 2010 Real Name: Dennis Garrett Location: Land of Oz Watch: Rolex Explorer II Posts: 405	And no matter what type of abrasive you use to re-grain the bracelet, it's going to leave a microscopic abrasive dust that will find it's way into the pins & holes. It would be a real good idea to lay it on edge in the ultrasonic again for a few minutes when you're done.

19 March 2012, 02:34 AM	#13
ec51 Banned Join Date: Apr 2011 Real Name: Eric Location: NY Watch: 14060M Posts: 1,642	Looks like we have some of the same supplies: The Amateur DIY Workshop Well done! If you were to get the Varaet, I would say you wouldn't need to ultrasonic as much. I use the Varaet for in-between cleanings and the solution works great with a toothbrush.

25 March 2012, 07:27 PM	#15
Kingair "TRF" Member Join Date: Oct 2009 Location: USA Watch: Not enough ;-) Posts: 21,232	Great post !

30 March 2012, 07:17 AM	#16
kkim1020 "TRF" Member Join Date: Oct 2011 Location: North Texas Posts: 171	What works even better than scotch pads are those manicure nail buffing tools.

11 April 2012, 12:45 PM	#17
jso305 "TRF" Member Join Date: Dec 2011 Real Name: johnny o Location: san jose, ca. Watch: explorer II Posts: 73	i love vereat!!!

11 April 2012, 01:54 PM	#18
vitix Banned Join Date: May 2009 Real Name: magneeleVE Location: Usa Watch: magneeleVE Posts: 2,030	Awesome! I do the same with mine every 6 or 8 months! Sent from my iPad2 using Tapatalk

12 April 2012, 11:17 PM	#19
FGorni "TRF" Member Join Date: Apr 2012 Real Name: Francis Location: Castell'Arquato Watch: Tudor Montecarlo Posts: 9	One time try this one for brushing http://www.ebay.it/itm/10PC-SCOTCHBR...#ht_881wt_1397 you will not be disappointed, just my 2 cents

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)