The Rolex Forums   The Rolex Watch

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX


Go Back   Rolex Forums - Rolex Forum > Rolex & Tudor Watch Topics > Rolex WatchTech

Reply
 
Thread Tools Display Modes
Old 2 February 2015, 04:40 PM   #1
pereiraex
"TRF" Member
 
Join Date: Dec 2014
Location: London
Posts: 50
Advice needed: Rolex stopping suddenly & regulation

Hi guys,

I recently got a new SubC (ref: 116610LN) and I've noticed two main issues:

1. The second hand stops suddenly when the power reserve is close to empty (say 36-48 hours after last use) - now one might reasonably think that it's simply the Rolex not having anymore power reserve to continue running, but no: if I give it a very slight shake it starts running again seemingly as per normal.

2. The watch is running 5 seconds slow on the dial up position - should I send it to regulate? I assume this is free as the watch is still under warranty?

Do let me know what you guys think especially with reference to point 1, are your submariners the same way? I'm hoping there is nothing seriously wrong with the internals and I'll probably get it down to the RSC next chance I get, but would like to hear from you first.
pereiraex is offline   Reply With Quote
Old 2 February 2015, 05:02 PM   #2
Andad
2024 SubLV41 Pledge Member
 
Andad's Avatar
 
Join Date: Nov 2006
Real Name: Eddie
Location: Australia
Watch: A few.
Posts: 37,475
1) This is normal. It will stop when the PR runs out and 48 hrs is good.

Giving it a shake with no PR left will activate the escapement and start it up again for a few minutes.


2) What is the rate result when worn by you in a normal wear pattern for a month?

The rate when running dial up, presumably on a table, doesn't really tell me much about it's precision or accuracy in normal long term wearing.

Welcome to TRF.
__________________
E

Andad is offline   Reply With Quote
Old 2 February 2015, 10:41 PM   #3
pereiraex
"TRF" Member
 
Join Date: Dec 2014
Location: London
Posts: 50
Quote:
Originally Posted by directioneng View Post
1) This is normal. It will stop when the PR runs out and 48 hrs is good.

Giving it a shake with no PR left will activate the escapement and start it up again for a few minutes.


2) What is the rate result when worn by you in a normal wear pattern for a month?

The rate when running dial up, presumably on a table, doesn't really tell me much about it's precision or accuracy in normal long term wearing.

Welcome to TRF.
1) I can confirm my sub runs for a few minutes (2mins~) upon shaking when it has almost no PR left, exactly as you said it would. So I take it this is a non-issue then?

2) I haven't actually worn it consistently for a month now. The reason why I'm just a little hesitant on taking it into the RSC is because I've heard stories of watches getting scratched and dinged when being returned from service. Is this still common?

Thanks! great community to be a part of.

Jean
pereiraex is offline   Reply With Quote
Old 2 February 2015, 11:08 PM   #4
MonBK
Banned
 
Join Date: Nov 2010
Location: Kingstown
Posts: 58,279
Quote:
Originally Posted by pereiraex View Post
1) I can confirm my sub runs for a few minutes (2mins~) upon shaking when it has almost no PR left, exactly as you said it would. So I take it this is a non-issue then?

2) I haven't actually worn it consistently for a month now. The reason why I'm just a little hesitant on taking it into the RSC is because I've heard stories of watches getting scratched and dinged when being returned from service. Is this still common?

Thanks! great community to be a part of.

Jean
For a few seconds off I wouldn't risk having issues.
MonBK is offline   Reply With Quote
Old 2 February 2015, 06:05 PM   #5
Old Expat Beast
TRF Moderator & 2024 SubLV41 Patron
 
Old Expat Beast's Avatar
 
Join Date: Jul 2013
Real Name: Adam
Location: Far East
Watch: Golden Tuna
Posts: 28,784
+1 on the first point, as Eddie says. Newer models like the SubC don't really respond to positioning regulation like the older models/movements. If it's under warranty, yes, Rolex will regulate it free of charge. Just got my Tudor done under warranty.
Old Expat Beast is offline   Reply With Quote
Old 2 February 2015, 10:53 PM   #6
Old Expat Beast
TRF Moderator & 2024 SubLV41 Patron
 
Old Expat Beast's Avatar
 
Join Date: Jul 2013
Real Name: Adam
Location: Far East
Watch: Golden Tuna
Posts: 28,784
Yes, it's a non issue. Are you in Singapore? If so, maybe you can check with the local forums there for feedback about RSC issues.
Old Expat Beast is offline   Reply With Quote
Old 3 February 2015, 02:12 AM   #7
Sublover2166
Banned
 
Join Date: Mar 2012
Real Name: John
Location: Manassas,Virginia
Watch: Ol'Bluesy & Hulk
Posts: 2,871
Make sure you wind the watch up 40 full turns of the winding crown. Are you doing this? Simply shaking the watch after the mainspring has unwound is not sufficient to keep it running or maintain any type of accuracy. If you do not wear it on a consistent basis maybe a watch winder would be beneficial as it keeps the mainspring fully wound.
Sublover2166 is offline   Reply With Quote
Old 4 February 2015, 02:47 AM   #8
PcarSBA
"TRF" Member
 
PcarSBA's Avatar
 
Join Date: Oct 2012
Location: Santa Barbara
Watch: IWC, Jaeger, Rolex
Posts: 123
My Sky was running 4.6 seconds slow - averaged over many days with different wear patterns. On the timegrapher the A/D found more inconsistencies between the positions.

I had it checked and regulated at the RSC under warranty and couldn't be happier. Now ~0.5 sec fast. Perfect.
PcarSBA is offline   Reply With Quote
Old 4 February 2015, 05:20 AM   #9
Brushpup
"TRF" Member
 
Brushpup's Avatar
 
Join Date: Jun 2007
Real Name: Patrick
Location: Texas
Watch: what I'm wearing
Posts: 5,943
I don't understand the concern of a watch stopping when it's out of power reserve.
__________________
TRFs "AFTER DARK" Bar & NightClub Patron-Founding Member


PClub # 10
74,592
The safest place for your watch is on your wrist.
Brushpup is offline   Reply With Quote
Old 4 February 2015, 05:27 AM   #10
locutus49
Banned
 
Join Date: May 2014
Real Name: John
Location: La Jolla, CA
Watch: Platona
Posts: 12,194
Live with it. All mechanical watches gain or lose a bit. Just part of the life. Strictly my opinion.
locutus49 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Wrist Aficionado

DavidSW Watches

Takuya Watches

My Watch LLC

OCWatches

Asset Appeal


*Banners Of The Month*
This space is provided to horological resources.





Copyright ©2004-2024, The Rolex Forums. All Rights Reserved.

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Rolex is a registered trademark of ROLEX USA. The Rolex Forums is not affiliated with ROLEX USA in any way.