ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Wenga · 2 April 2015, 05:11 AM

In have been reading a lot of posts about the topic , but not really seen any pics.
After reading those posts i have found out that i need the following items:

Rubber Strap BR.403.064.002CA from city of sails , the black rubber strap will be 1 mm to wide but i havent found a better choice.

- 4 X Plots PL.222.014.ST from the city of sails ?

2 X Screws for strap VI.254.066.ST

2 X Nuts for screw above VI.253.056.ST

All OEM

Im not really fond of the AP 18 mm buckle so i found an aftermarket 18 mm no name diver look a like.

Will i succed in doing this conversion ?

Wenga · 2 April 2015, 05:13 AM

Wenga · 2 April 2015, 05:14 AM

Its a SS

illition · 3 April 2015, 07:16 AM

I'm interested in doing this conversion as well. And will have to wait for experts to chime in, but from what I have seen on this forum, it seems like it is possible.

Although I don't think anyone has given a full 100% confirmation of it.

Another option you can try is getting a leather strap custom made for it. That will ensure that it fits 100%. I believe if you mail the plots to somebody to make the strap it should work fine.

srvrf · 3 April 2015, 07:27 AM

The COS rubber strap is 27/18 so it may be okay or even a little short. My older 39mm 25860 takes 26/18 straps so your 41mm 26320 is probably 27mm or 28mm at the case

Sent from my iPhone using Tapatalk

Wenga · 3 April 2015, 02:50 PM

As far as i know the 26320 is 26 mm at the case end , so the strap would be a bit to big , i could accept that.
Yes , i have also read a lot of post about mounting a rubber strap , but have not found pics or confirmation.

The leather / gator strap would be next :-)

2 April 2015, 05:11 AM	#1
Wenga "TRF" Member Join Date: Feb 2014 Location: Denmark Posts: 60	26320 on rubber ? In have been reading a lot of posts about the topic , but not really seen any pics. After reading those posts i have found out that i need the following items: Rubber Strap BR.403.064.002CA from city of sails , the black rubber strap will be 1 mm to wide but i havent found a better choice. - 4 X Plots PL.222.014.ST from the city of sails ? 2 X Screws for strap VI.254.066.ST 2 X Nuts for screw above VI.253.056.ST All OEM Im not really fond of the AP 18 mm buckle so i found an aftermarket 18 mm no name diver look a like. Will i succed in doing this conversion ?

3 April 2015, 07:27 AM	#5
srvrf 2025 Pledge Member Join Date: Dec 2013 Real Name: Steve Location: Indiana Watch: PP/AP/VC Posts: 2,179	26320 on rubber ? The COS rubber strap is 27/18 so it may be okay or even a little short. My older 39mm 25860 takes 26/18 straps so your 41mm 26320 is probably 27mm or 28mm at the case Sent from my iPhone using Tapatalk

2 April 2015, 05:13 AM	#2
Wenga "TRF" Member Join Date: Feb 2014 Location: Denmark Posts: 60

2 April 2015, 05:14 AM	#3
Wenga "TRF" Member Join Date: Feb 2014 Location: Denmark Posts: 60	Its a SS

3 April 2015, 07:16 AM	#4
illition "TRF" Member Join Date: Jan 2015 Location: singapore Posts: 81	I'm interested in doing this conversion as well. And will have to wait for experts to chime in, but from what I have seen on this forum, it seems like it is possible. Although I don't think anyone has given a full 100% confirmation of it. Another option you can try is getting a leather strap custom made for it. That will ensure that it fits 100%. I believe if you mail the plots to somebody to make the strap it should work fine.

3 April 2015, 02:50 PM	#6
Wenga "TRF" Member Join Date: Feb 2014 Location: Denmark Posts: 60	As far as i know the 26320 is 26 mm at the case end , so the strap would be a bit to big , i could accept that. Yes , i have also read a lot of post about mounting a rubber strap , but have not found pics or confirmation. The leather / gator strap would be next :-)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)