ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

DKSRolex · 14 October 2016, 08:49 AM

Hey guys I have a quick question for you all.

So I recently purchased a Z-serial SS GMT pepsi with oyster bracelet and it fits perfectly. I am a pretty hefty guy (6 foot 225 lbs) and have a large wrist (8in). I fluctuate weight extremely easily and in the past some watches became too loose since i was losing weight and some became too tight while gaining weight.

I wanted to get a Sub bracelet and swap it on my GMT since it has an adjuster in the clasp. Would this be a good idea? E.G. the watch would lose value or just a bad idea in general?

Also is it possible to get ONLY the Sub clasp and not the whole bracelet?

P.S. if anyone responds "then stay the same weight" here's what I have to say to you!

Tools · 14 October 2016, 08:56 AM

you can use the Sub Glide lock clasp on just about any Oyster bracelet. It won't affect "value" at all.

However, they are scarce and run about a thousand bucks so it is considerably cheaper to spend the extra minute and a half using the micro adjustments in the clasp you already have.

DKSRolex · 15 October 2016, 01:11 AM

Quote:

Originally Posted by Tools

you can use the Sub Glide lock clasp on just about any Oyster bracelet. It won't affect "value" at all.

However, they are scarce and run about a thousand bucks so it is considerably cheaper to spend the extra minute and a half using the micro adjustments in the clasp you already have.

http://www.ebay.com/itm/Stainless-St...-/322292724367

found one new for 186. Fake?

MorningTundra · 14 October 2016, 09:30 AM

You can change just the clasp. Or perhaps consider an aftermarket oyster clasp that can be had pretty cheap.

Sent from my iPhone using Tapatalk

DKSRolex · 15 October 2016, 01:41 AM

http://www.ebay.com/itm/Stainless-St...-/322292724367

I found one for 186 brand new. Fake?

14 October 2016, 08:49 AM	#1
DKSRolex "TRF" Member Join Date: Oct 2016 Location: NYC Posts: 25	Swap GMT II pepsi oyster bracelet for new Sub bracelet?? Hey guys I have a quick question for you all. So I recently purchased a Z-serial SS GMT pepsi with oyster bracelet and it fits perfectly. I am a pretty hefty guy (6 foot 225 lbs) and have a large wrist (8in). I fluctuate weight extremely easily and in the past some watches became too loose since i was losing weight and some became too tight while gaining weight. I wanted to get a Sub bracelet and swap it on my GMT since it has an adjuster in the clasp. Would this be a good idea? E.G. the watch would lose value or just a bad idea in general? Also is it possible to get ONLY the Sub clasp and not the whole bracelet? P.S. if anyone responds "then stay the same weight" here's what I have to say to you!

14 October 2016, 08:56 AM	#2
Tools TRF Moderator & 2025 Titanium Yacht-Master Patron Join Date: May 2007 Real Name: Larry Location: Mojave Desert Watch: GMT's Posts: 43,681	you can use the Sub Glide lock clasp on just about any Oyster bracelet. It won't affect "value" at all. However, they are scarce and run about a thousand bucks so it is considerably cheaper to spend the extra minute and a half using the micro adjustments in the clasp you already have. __________________ (Chill ... It's just a watch Forum.....) NAWCC Member

14 October 2016, 09:30 AM	#4
MorningTundra "TRF" Member Join Date: Apr 2016 Real Name: Morningtundra Location: USA, UK & HKG Posts: 1,038	You can change just the clasp. Or perhaps consider an aftermarket oyster clasp that can be had pretty cheap. Sent from my iPhone using Tapatalk

15 October 2016, 01:41 AM	#5
DKSRolex "TRF" Member Join Date: Oct 2016 Location: NYC Posts: 25	http://www.ebay.com/itm/Stainless-St...-/322292724367 I found one for 186 brand new. Fake?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)