Polishing out light scratches

[Peter99]

Whilst carry a pile of bricks wearing my SubC I inadvertently scratched the highly polished edge of the clasp. I was gutted

This troubled me for some time but I remembered I had a tube of 'Autosol Metal Polish' in the garage.
So with some apprehension and using a soft spectacle cleaning cloth I gentle applied a touch of the white cream, started to polish and much to my amazement I have been able to remove the scratches!

I wish I had taken some before & after pics but I just didn't think it would work.
I have no connection whatsoever with the suppliers of this product.

In the UK it is available from Autosol (UK) Ltd of Rotherham, but I believe it was originally a German product, but I could be wrong, and was much used in my early days for removing the heat bluing on exhaust pipes of motor cycles, as was the fashion at that time.
But it works on a Rolex also! Fantastic!

[rafi_16610]

i use autosol too. but dont use it, or use it diluted, on gold finishes, its quite an abrasive

I've also had success using it to lighten, sometimes even remove scratches on acrylic crystals. no success with mineral glass though.

Sent from my B15Q using Tapatalk

[Peter99]

Originally Posted by rafi_16610

i use autosol too. but dont use it, or use it diluted, on gold finishes, its quite an abrasive

I've also had success using it to lighten, sometimes even remove scratches on acrylic crystals. no success with mineral glass though.

Sent from my B15Q using Tapatalk

I would not say that Autosol is quite abrasive, it is not on a SS SubC. Might be on gold, I do not know.
Rolex stainless steel is not a hard steel, hence it can scratch and dent easily with no problem. But that means light scratches can be removed surprising easily with Autosol up to the standard of an as new polished surface.
A small dab on a soft cloth with light pressure.
The light scratches on the polished surfaces of my Exp 39mm Mk1 have also been removed to give an 'as new' condition to the watch.
I would suggest that people 'in the trade' might prefer you to go them rather than use Autosol.

[captain_NEMO]

Awesome. Glad it worked out for you.

I don't have the cajones to do that to any of my watches, so I've learned to live with the scratches - no matter how deep and absurd they are - until it's service time.

[hugs]

Thanks for the thread. BOokmarked this for future reference.

[bobby81]

I would be very apprehensive using such methods when a couple of Cape Cod Cloths wouldn't set you back much & are totally safe especially when dealing with such an expensive Watch

[thesharkfactor]

Cape cod cloth if you must.. personally, I like my sctraches and marks, they make the watch mine and give it character. Only time I want my watch mint and scratch free is on the day I buy it and the day I sell it.

[GradyPhilpott]

My watches, like me, carry some battle scars.

C'est la vie.

[No SUBctitute]

Originally Posted by Peter99

Whilst carry a pile of bricks wearing my SubC I inadvertently scratched the highly polished edge of the clasp. I was gutted

This troubled me for some time but I remembered I had a tube of 'Autosol Metal Polish' in the garage.
So with some apprehension and using a soft spectacle cleaning cloth I gentle applied a touch of the white cream, started to polish and much to my amazement I have been able to remove the scratches!

I wish I had taken some before & after pics but I just didn't think it would work.
I have no connection whatsoever with the suppliers of this product.

In the UK it is available from Autosol (UK) Ltd of Rotherham, but I believe it was originally a German product, but I could be wrong, and was much used in my early days for removing the heat bluing on exhaust pipes of motor cycles, as was the fashion at that time.
But it works on a Rolex also! Fantastic!

Good on you!

I had had success with a damp green Scotchbrite pad for brushed SS Rolex surfaces.

[jimbones43]

Removing scratches is removing metal, be careful how often u do it

[ttomczak]

I agree with the cape cod cloths. Been very happy with the results over the years.

[Rolexrox]

Sorry for being up an old thread. Just wanted to share that I used autosol recently and very lightly on the Rolex. It turned out with a lot of fine scratches. Waiting for the cape cod delivery to save it.

Sent from my SM-N975F using Tapatalk