Rolex Accuracy

[rickytz7111]

I have a question about the accuracy of a brand new Rolex GMT. If you fully wind the watch and check it after 24 hours with no wear time should it be running + or - 2 sec? Or would 3 to 4 seconds be fine? Thanks

[Atomic4k]

I'm a new member too, and I've seen this in a lot of threads. It's fine. From the posts I've seen from the other members the +2/-2 thing is in a sterile environment in a lab. Lots of different factors and variables attribute to the watch being fast or slow. And one member said there's 86,400 seconds in a day lol don't worry so much about it.

[strafer_kid]

Originally Posted by Atomic4k

I'm a new member too, and I've seen this in a lot of threads. It's fine. From the posts I've seen from the other members the +2/-2 thing is in a sterile environment in a lab. Lots of different factors and variables attribute to the watch being fast or slow. And one member said there's 86,400 seconds in a day lol don't worry so much about it.

Exactly......over the years I have learnt that it's best not to get too concerned about total precision accuracy with Rolex and I have just got on with enjoying wearing them.

[bravetony]

Personally 3/4 seconds is okay

[tamiya]

Originally Posted by rickytz7111

I have a question about the accuracy of a brand new Rolex GMT. If you fully wind the watch and check it after 24 hours with no wear time should it be running + or - 2 sec? Or would 3 to 4 seconds be fine? Thanks

How you lay down the watch makes a difference.
Some positions make it run faster, other slower.

Timing by factory is an average of many (6? 8?) different positions over 24hr period.

[Timetracker]

My previous ones seemed to do better flat. Took a while to learn that:-)

[SearChart]

Originally Posted by Timetracker

My previous ones seemed to do better flat. Took a while to learn that:-)

When it's flat the balance pivots have the least friction and gravity has the least possible (negative) effect on the hairspring, thus making it more accurate.

[Timetracker]

Makes perfect sense........

[holdtime]

/u

[SeaDwellerBund]

~1.5 sec fast per day on mine and it is very consistent from day to day and its on my wrist virtually 24/7, and with good stable measurements on my clock tuner app. Green tag should be within +-2 / day in normal use in my opinion.

[steelman68]

I’ve had my gmt just over a year now and it wasn’t until it was about 3-4 months old before it settled and started being accurate. Now it’s +4 secs a month


Sent from my iPhone using Tapatalk

[mrc39p]

I've had my 14060M from 2010 that hasn't been serviced and it still runs within COSC specs when I measure the accuracy using the Toolwatch app.

[pgrandster]

I have seen a lot of threads on this and the consensus is if it runs fast but not more than +6-8 seconds per 24 hours, the watch is fine until its next servicing. My BLNR runs +1 per week if I wear it and lay it dial side down when I sleep. If I lay it dial side down and don't wear it, it runs +1 every 48 hours. If I lay it dial side up, it runs -1 every 24 hours. My Daytona runs fast in all positions, but no more than +3 or 4 per 24 hours.

[padi56]

Originally Posted by rickytz7111

I have a question about the accuracy of a brand new Rolex GMT. If you fully wind the watch and check it after 24 hours with no wear time should it be running + or - 2 sec? Or would 3 to 4 seconds be fine? Thanks

Simply answer yes.

[Xerxes77]

My Sub work -1 sec/day but if I let it on the night with dial down work +1sec/day
In this modebI can keep my Sub to 0 for month

[jarohr]

I have had two Rolex's, and they have been really accurate. Love them.