Uncomfortable 116610 !

[scousejames]

So it's been pretty hot here in the UK the last couple of days, not to mention, very humid!

I've been wearing my 116610 this week.
I wear it pretty snug and above the wrist bone, as I don't like my watches flopping about my wrist or the crown hitting the back of my hand.

However, after my wrist gets a bit sweaty the watch becomes pretty top heavy and starts falling below the wrist bone and crown starts digging in to my hand.
I find this a bit annoying, and have never had this issue with my Omegas.

I read a lot on here how people find the Sub ceramic the most comfortable watch and they hardly notice it on their wrist half the time.
Does anyone suffer the same problem as me?

I'm thinking it could be because of the thicker case back, the way it sits on the wrist, the watch is not as planted, hence it starts moving when it gets moist.
It's kind of killing my enjoyment of the watch.

Any ideas?

[Freshly206]

I have not run into that issue myself as I tend to wear mine more on the loose side. Mine usually gets snagged on my skin by the bottom of the clasp. It sticks while the watch itself pulls down towards my hand. I have to unstick it sometimes.

If I were you, I’d just play around with the sizing. One of the best parts about our watch is the adjustable clasp. Play around with that for a while until you find the size that hopefully fixes the issue.


Sent from my iPhone using Tapatalk Pro

[Crazy Lugs]

Fit of six digit subs is highly dependent on bracelet link setting relative to the Glidelock “notches.” Call it a conspiracy theory, but the tail end of the inner clasp can affect the geometry of how the bracelet fits depending on link arrangement and the Glidelock setting. There’s basically only one spot I can get a perfect fit.

YMMV, but it’s worth reading up on bracelet adjustment for this particular piece- there’s a lot of good info on the forum that can be found with some searching. Hot and humid weather will certainly require opening up the Glidelock a notch or so from your typical setting. It’s unlikely to fit perfectly in all scenarios, at least that’s my experience with my particular wrist shape (flat/wide) and diameter (7”). Make sure the six o’clock side is sized properly- most have too many links.

[bp1000]

Originally Posted by Crazy Lugs

Fit of six digit subs is highly dependent on bracelet link setting relative to the Glidelock “notches.” Call it a conspiracy theory, but the tail end of the inner clasp can affect the geometry of how the bracelet fits depending on link arrangement and the Glidelock setting. There’s basically only one spot I can get a perfect fit.

This is rarely discussed but a very good point.

Look at the inner part of the clasp and where it sits on your wrist. Adjust the links until it matches the curvature of your wrist,

If the end of the inner clasp digs into your wrist it’s going to be noticeable after a lot of wear and also push the watch in the opposite direction.

A good point he made

[Mystro]

Originally Posted by bp1000

This is rarely discussed but a very good point.

Look at the inner part of the clasp and where it sits on your wrist. Adjust the links until it matches the curvature of your wrist,

If the end of the inner clasp digs into your wrist it’s going to be noticeable after a lot of wear and also push the watch in the opposite direction.

A good point he made

X2. The glide lock clasp is bigger and heavier and needs to be off center for some wrist as not to dig into the middle tendons. I have noticed the GMT clasp to be more comfortable and not as bulky as the glide lock clasp because the way the glide lock can be adjusted to be longer.

[watchmework]

Originally Posted by Mystro

X2. The glide lock clasp is bigger and heavier and needs to be off center for some wrist as not to dig into the middle tendons. I have noticed the GMT clasp to be more comfortable and not as bulky as the glide lock clasp because the way the glide lock can be adjusted to be longer.

This is so true mystro!

[Dirt]

Originally Posted by bp1000

This is rarely discussed but a very good point.

Look at the inner part of the clasp and where it sits on your wrist. Adjust the links until it matches the curvature of your wrist,

If the end of the inner clasp digs into your wrist it’s going to be noticeable after a lot of wear and also push the watch in the opposite direction.

A good point he made

It's certainly a factor

[nikesupremedunk]

Originally Posted by Crazy Lugs

Fit of six digit subs is highly dependent on bracelet link setting relative to the Glidelock “notches.” Call it a conspiracy theory, but the tail end of the inner clasp can affect the geometry of how the bracelet fits depending on link arrangement and the Glidelock setting. There’s basically only one spot I can get a perfect fit.

YMMV, but it’s worth reading up on bracelet adjustment for this particular piece- there’s a lot of good info on the forum that can be found with some searching. Hot and humid weather will certainly require opening up the Glidelock a notch or so from your typical setting. It’s unlikely to fit perfectly in all scenarios, at least that’s my experience with my particular wrist shape (flat/wide) and diameter (7”). Make sure the six o’clock side is sized properly- most have too many links.

I also had to adjust my bracelet many many times before I could get an acceptable fit. Still nowhere near as comfortable as a GMT even though it lacks the overhyped glide lock. My advice is try removing the half link. When I had the half link in, it wouldn’t fit right even when I tried to adjust with glide lock. Once removed it fit a little better. Another thing that may help is once you get an acceptable fit, just keep wearing it. Over time you get used to it and won’t notice as much. Just don’t expect the same fit as a Daytona or an explorer because it’s a chunky watch. Good luck!

[Psmith]

I wore mine in various climates, including well over 40C, with no issues. Have you played around with the glidelock clasp, as others have suggested? If this doesn't help, perhaps check out bracelet link settings as mentioned above. You should be able to dial-in a good fit with a bit of experimentation.

[Andad]

I notice this on my 114060 until I swapped a few links around and moved the clasp more towards the 6.

[bp1000]

If you wear it quite snug I’m surprised it managed to slip down

I’ve got the opposite problem. In this heat the wrist swells so much the watch becomes tight and I hate that. That’s on watches without the wonderful glide lock system

When I’m wearing my newer subs that’s what I use and I normally always adjust the glide lock in the afternoon, in my case looser.

So why don’t you make the bracelet tighter to stop it moving? I’d also make sure the clasp is centred on your wrist. I find it stops it spinning around. I’m normally 60/40 on the links with more on the 12 side.

[j0hnny]

Originally Posted by bp1000

If you wear it quite snug I’m surprised it managed to slip down

I’ve got the opposite problem. In this heat the wrist swells so much the watch becomes tight and I hate that. That’s on watches without the wonderful glide lock system

When I’m wearing my newer subs that’s what I use and I normally always adjust the glide lock in the afternoon, in my case looser.

So why don’t you make the bracelet tighter to stop it moving? I’d also make sure the clasp is centred on your wrist. I find it stops it spinning around. I’m normally 60/40 on the links with more on the 12 side.

Same here exactly.


Sent from my iPhone using Tapatalk

[Tomas Eriksson]

Is the clasp somewhat centered the same way as on your omegas?

[walds11]

No issues here. I even run with the watch on. Play around with the sizing and centering of the clasp. Hopefully that will suffice.

[abozz]

A steel sports watch is strong, but never comfortable as a dress watch. I live in a hot and humid city all year round, I wear an SD43 all day and night, but I am psyched that I like to wear these 185 grams of steel on my wrist. Tell your mind it's like that, period.

Enviado desde mi SM-G975F mediante Tapatalk

[Chester01]

I have a 16610 and don’t have that problem, as the watch is a good deal lighter. Turns out the added heft of the solid link bracelet is not an advantage especially if one is going to be active while wearing it.

[Crazy Lugs]

Originally Posted by Chester01

I have a 16610 and don’t have that problem, as the watch is a good deal lighter. Turns out the added heft of the solid link bracelet is not an advantage especially if one is going to be active while wearing it.

Yeah...except for the minimum of five links on the 6 o’clock side with a 16610, which on my wrist causes it to kick to the 12 o’clock side.

It would be perfect if you could run four links on the six o’clock side on a 16610, but alas...

[Chester01]

Originally Posted by Crazy Lugs

Yeah...except for the minimum of five links on the 6 o’clock side with a 16610, which on my wrist causes it to kick to the 12 o’clock side.

It would be perfect if you could run four links on the six o’clock side on a 16610, but alas...

That happens to me too. But I also notice that my hand tilts that way when typing or driving and causes much of that tendency.


Sent from my iPhone using Tapatalk

[Heff]

It took me several adjustments before I found the right size in terms of number of links and glidelock location, but once I found it the Hulk became my most comfortable watch.

I do agree with you about the case back. If it were slimmer like the GMT, it would be even more comfortable.


Sent from my iPhone using Tapatalk

[Xenon]

Hmm...Never had that problem with a 11610.

[nighthawk77]

After also picking up a 116610 last week I've been trying out various link configurations. I left the AD with 4 links on the 6oc and 6.5 links on the 12oc with the GL fully closed.

This didnt feel or look right - I could see the top of my clasp when looking at the watch, so I swapped this to 5 links on the 6oc and 5 links on the 12oc with the GL set around the middle. Again this didnt feel right, so swapped again to 4 links on the 6oc and 6 links on the 12oc, but I was back to the same problem I had with when I left the AD - I could again see the top of the clasp on the 6oc side and the watch felt as if it was pulling forward.

I'm now at 4.5 on the 6oc and 6 on the 12oc and can fully close the GL. The watch doesnt feel like it's being pulled forward and the clasp has disappeared out of view under my wrist. Similar to goldilocks, this feels just right. The watch feels a lot more 'natural' on my wrist, similar to how my Omega and my 214270 feel. I think I'll be sticking with this configuration for the time being, but just goes to show you might need to do a little experimenting and trying out different set ups before you find the perfect fit for you.

I would note that the clasp underwrist isn't always central depending on how much of the GL I have out, but I can live with this on the basis the watch head is where it's meant to be and the fact this set up is comfortable.

If you have the proper tools to do it yourself then I'd have a play around, but if not I'm sure your AD will assist...

[SearChart]

I hate wearing a watch in hot humid weather. I also just really hate hot weather.

It is no watch or something on NATO when it's hot for me.

[Oxfordian]

Originally Posted by SearChart

I hate wearing a watch in hot humid weather. I also just really hate hot weather.

It is no watch or something on NATO when it's hot for me.

Nato straps in the summer, easy to adjust if wrist swells or contracts, cooler than a bracelet, less sweaty than leather, just a win win for me.

[socialpro]

Originally Posted by scousejames

So it's been pretty hot here in the UK the last couple of days, not to mention, very humid!

I've been wearing my 116610 this week.
I wear it pretty snug and above the wrist bone, as I don't like my watches flopping about my wrist or the crown hitting the back of my hand.

However, after my wrist gets a bit sweaty the watch becomes pretty top heavy and starts falling below the wrist bone and crown starts digging in to my hand.
I find this a bit annoying, and have never had this issue with my Omegas.

I read a lot on here how people find the Sub ceramic the most comfortable watch and they hardly notice it on their wrist half the time.
Does anyone suffer the same problem as me?

I'm thinking it could be because of the thicker case back, the way it sits on the wrist, the watch is not as planted, hence it starts moving when it gets moist.
It's kind of killing my enjoyment of the watch.

Any ideas?

I could never get my 116610 to sit just right, and found it rather uncomfortable and bulky for daily wear - even trying the links in various settings and combinations. I ended up selling it shortly after.

Beautiful watch, but just wasn't meant to be.

[JohnnyBer]

Moving the half link to the 6:00 side (and removing a full link) helps quite a bit.

[acheronsgrief]

I know this is not a popular opinion, but I’ve had 2 6 digit subs (bluesy and 116610) and both have been incredibly uncomfortable. I can wear my YM, DD or Daytonas without even noticing, but something about the sub doesn’t work for me. I even get a weird carpal tunnel like pain in my wrist from wearing them that I don’t get from any other watch. You’d think with the half link and glidelock this would never be a problem but unfortunately it is.

[Jmbarrack]

Originally Posted by acheronsgrief

I know this is not a popular opinion, but I’ve had 2 6 digit subs (bluesy and 116610) and both have been incredibly uncomfortable.

Agreed. I've owned several 6 digit models, sub, gmt, SD4k. All of them uncomfortable and eventually sold them. The 5 digit equivalents I've also owned. All of them miles ahead of the newer references in terms of comfort and daily wrist wearing. The bulk of the new references weighs the watch down and makes them pull in all different directions. I tried every possible configuration to no avail.

My 116523 Daytona is the only 6 digit reference that wears comfortable to me. Again, I think it's due to the less sharp and less bulky case, because the overall weight of the two-tone Daytona is the same or a little more than the 116610.

[Crazy Lugs]

Originally Posted by Jmbarrack

Agreed. I've owned several 6 digit models, sub, gmt, SD4k. All of them uncomfortable and eventually sold them. The 5 digit equivalents I've also owned. All of them miles ahead of the newer references in terms of comfort and daily wrist wearing. The bulk of the new references weighs the watch down and makes them pull in all different directions. I tried every possible configuration to no avail.

My 116523 Daytona is the only 6 digit reference that wears comfortable to me. Again, I think it's due to the less sharp and less bulky case, because the overall weight of the two-tone Daytona is the same or a little more than the 116610.

What’s your wrist shape & size?

[Jmbarrack]

Originally Posted by Crazy Lugs

What’s your wrist shape & size?

6.75 inches, flat.

[Dirt]

Originally Posted by Jmbarrack

6.75 inches, flat.

In that case Andad's suggestion would seem viable to try out if you haven't already