Tudor Prince Date Chrono on Rolex Jubilee bracelet?

[Robertus2]

I'm to find a nice pre-loved Tudor 79270. I have a brand new Rolex Jubilee bracelet with end-links 502B, originally my GMT II. came on this bracelet back in 1998. My question to those with the knowledge if the Jubilee with the named end-links will have a perfect fit with the 79270 (both 40 mm cases) or this is only a dream of mine? If someone has the watch and the bracelet it would be nice to see a few photos too.
If this is not the proper place for this thread Mods pls feel free to shift it where it best belongs!
Thank you in advance for any kind input, best with photos!
Regards,
Robert

[mui.richard]

The mid case of the 79270 is much taller than the GMT-MASTER II so I doubt that's gonna fit, even though they both have 20mm lug width.

[andy66db]

I used to own a 79260, which is the same mid-case. Rolex bracelets do fit — in that the case holes are in the same place — but due to the taller case height, you do get an ugly 2-3mm gap between the end-link and the bezel. Tudor end links are much taller.

[Dan Pierce]

As stated above the width would work but not the height of the end links. Might want to consider a Tudor jubilee, if you can source one. It's made for the Tudor chronographs.
dP

[dricig]

If you can get 2 Tudor jubilee end links your Rolex bracelet should fit.
Maybe DP can let you know what the end link number is.

[Dan Pierce]

Originally Posted by dricig

If you can get 2 Tudor jubilee end links your Rolex bracelet should fit.
Maybe DP can let you know what the end link number is.

I don't know of any Tudor end links that fit a Rolex jubilee.
dP

[Robertus2]

Seems not as easy as I was hoping. Thanks for all your inputs!