ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
|
11 March 2024, 02:27 PM | #1 |
"TRF" Member
Join Date: Mar 2024
Real Name: Emil
Location: Canada
Posts: 4
|
Breitling Bezel
Hi guys, so I newly acquired a love of watches. I liked watches when I was younger but just didn’t care for them until now. I am pretty novice when it comes to timepieces but I’m getting there. Anyways excuse my inexperience if I say something incorrectly.
So anyways, I recently purchased a used Breitling Navi A23322. And I had no ideas that you could spin the bezel. I showed it to my friend and he had trouble turning it. My question is, is there a way to maybe loosen it up a bit? I was told it shouldn’t be so hard as to where you had to take the watch off your wrist and use two hands to turn it. Does anyone have any suggestions? Sent from my iPhone using Tapatalk |
24 March 2024, 04:48 PM | #2 |
"TRF" Member
Join Date: May 2019
Location: Florida
Posts: 178
|
Put some sort of lubricant like silicone spray under the bezel. Lots of body grease and gunk can build up in there.
|
24 March 2024, 11:16 PM | #3 |
"TRF" Member
Join Date: Jul 2014
Real Name: Ed
Location: Boston, MA
Watch: all of them!!!
Posts: 57
|
Try cleaning with dental floss first. Good luck and nice watch!
|
24 March 2024, 11:43 PM | #4 |
Banned
Join Date: Feb 2024
Location: Colorado
Posts: 70
|
Clean the bezel first with a toothbrush, mild soap or detergent, lukewarm water, and a soft, lint-free cloth. Pay close attention to any dirt, grime, or residue that may have accumulated in the bezel's crevices or markings after that you can spin the bezel.
|
9 April 2024, 12:15 AM | #5 |
"TRF" Member
Join Date: Sep 2011
Location: Canada
Posts: 140
|
Be careful with spraying stuff under the bezel. That’s the area responsible for the Navi’s poor water resistance. You could end up staining your dial, rehaut, etc. Try gentle brushing with a wet toothbrush, cleaning carefully under the bezel with a thin toothpick and sliding floss underneath as much as you can. It’s possible the bezel may have to be removed and cleaned properly and thoroughly.
Cheers and good luck. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.