ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Mondo · 2 October 2011, 08:58 AM

I have a Pepsi coming in from an Internet purchase and am wanting to open it up once it arrives to ensure it's authenticity.

Should I gobto my ad or open it up myself.

What are the dangers if I do it myself?

smallcandle · 2 October 2011, 09:11 AM

If you don't have the proper tool or experience I would suggest going to an AD or well-respected watchmaker.

Speed · 2 October 2011, 09:16 AM

I wouldn't do it.

If you don't have the right tool, I could see you chewing up the teeth on the caseback. Would you know what to look for if you were to open up the watch?

kilyung · 2 October 2011, 09:33 AM

Without the right tools, you risk damaging the caseback. You also risk damaging the caseback gasket. You'll also need to check water resistance of the reassembled case. Unless you're ready to sink $5k+ on tools, take it to a watchmaker.

HL65 · 2 October 2011, 09:39 AM

I always open up my vintage watches - no reason on modern ones IMHO.

dddrees · 2 October 2011, 09:44 AM

Quote:

Originally Posted by kilyung

without the right tools, you risk damaging the caseback. You also risk damaging the caseback gasket. You'll also need to check water resistance of the reassembled case.

x2

Dan Pierce · 2 October 2011, 09:54 AM

Only on my Seiko's where any margin of error is less dramatic.
dP

HL65 · 2 October 2011, 09:56 AM

PS- Having the right tools and knowing what you are doing is a given!

MY-WATCH · 2 October 2011, 12:02 PM

Take it to AD

Rolex Junky · 2 October 2011, 12:05 PM

Does the back open?

Andad · 2 October 2011, 12:14 PM

I have a case opener set and checked the movement number on my '71 DJ.
I also swapped my Pepsi to a clear caseback and took some pix of my SD movement.
Pressure testing the SD was a problem - that water sure was DEEP.

MortgageGuy · 2 October 2011, 12:32 PM

Take it to your AD, it will take a moment or two and no questions or concerns

humvee · 2 October 2011, 12:36 PM

There is no good reason for anyone to be opening the caseback of their rolex.
You're asking for trouble. Somethings are better left alone or to the pros.

Mondo · 2 October 2011, 02:27 PM

Thanks for all the info. The AD it is.

Thanks again
Mondo

SkyKing31 · 2 October 2011, 02:44 PM

Better off taking it to the AD of a watchmaker

Darlinboy · 2 October 2011, 08:40 PM

You're smart to check out a new purchase, but unless you have the tools and know-how...

get thee to a professional!

padi56 · 2 October 2011, 08:58 PM

Quote:

Originally Posted by Mondo

I have a Pepsi coming in from an Internet purchase and am wanting to open it up once it arrives to ensure it's authenticity.

Should I gobto my ad or open it up myself.

What are the dangers if I do it myself?

If you bought though a reliable sourse even via the Internet cannot see any point in getting the back of now as you have paid for the watch.Has the person you bought it from promised you a refund if anything is wrong with your watch.Getting the back of a Rolex is not rocket science with the correct tool,most any good watchmaker will have those.And the pressure check after well again most watchmakers on the high street could do that.Now watches like the SD although rated at extreme depth,if it passes a normal 200-300m test then it would be fine for all normal scuba and water activities.

jezza17 · 2 October 2011, 09:02 PM

best to take it to an AD or an authorised and trusted watchmaker.

Alcan · 2 October 2011, 09:05 PM

Quote:

Originally Posted by directioneng

Pressure testing the SD was a problem - that water sure was DEEP.

jamesbondOO7 · 2 October 2011, 09:21 PM

I don't even open the bonnet of the car, why would I open my watch?

Rags · 2 October 2011, 10:30 PM

I guess if I had the proper tools I would but since I don't I won't... Hey I made a funny...

travisb · 2 October 2011, 10:40 PM

Take it to your AD or experienced watchmaker.

tictic · 3 October 2011, 01:25 AM

making sure it is waterproof after closing it up is another matter.
Are you willing to take that chance?

Andelain · 3 October 2011, 01:41 AM

When I bought my T-Bird recently from ebay I also got online and ordered an LG Openall. We don't exactly have AD's and watch repair shops over here, so I was on my own. I paid real close attention to what I was doing, and once it was open I snapped some pics to post in Watchout, then closed it back up real carefully. T-Bird proved to be real, and it's no worse for the experience.

Like To Watch · 3 October 2011, 01:53 AM

No way.

siewmaiwatch · 3 October 2011, 05:28 AM

Not unless you know what you are doing, and what you are looking for once opened. Otherwise, risks are not necessary. Leave it to the pros.

SteKos · 4 October 2011, 02:00 AM

Without the right tools, which are fairly costly, you'll probably never even get it open. The backs are on very tight. Of course, opening the case is the best way to insure it's got a real movement, any watchmaker should have the tools to open it, and should know what a real one looks like. I doubt an AD would open it for you just to verify.

That said, I have opened mine. I don't go with the "Only Rolex can open it" thing. It's mine, if I wanna pop it open, I will. Did it with an Exp II that I got in a trade, just to be 100% sure. But I have the tool and the movement holder. And I make sure the seal is clean before closing it. No, it's not pressure tested, but for what I use it for, I'm 99.999% sure it will survive till the next maintenance.

chronoman · 4 October 2011, 02:15 AM

Sure, but let's put it this way, my friendly Rolex watchmaker is the only tool i need. I've seen my Daytona in hundreds of bits, as the crystal was broke prior to my ownership. It was just far easier to observe.

padi56 · 4 October 2011, 03:40 AM

Quote:

Originally Posted by SteKos

Without the right tools, which are fairly costly, you'll probably never even get it open. The backs are on very tight. Of course, opening the case is the best way to insure it's got a real movement, any watchmaker should have the tools to open it, and should know what a real one looks like. I doubt an AD would open it for you just to verify.

That said, I have opened mine. I don't go with the "Only Rolex can open it" thing. It's mine, if I wanna pop it open, I will. Did it with an Exp II that I got in a trade, just to be 100% sure. But I have the tool and the movement holder. And I make sure the seal is clean before closing it. No, it's not pressure tested, but for what I use it for, I'm 99.999% sure it will survive till the next maintenance.

Have to agree its not rocket science to get the back off a Rolex with the correct tools.Fact its quite simple to do, I am sure that most could do it quite easy.Myself have had more problem trying to get the top off a pot of jam,than getting the back off a Rolex watch.And pressure check again not rocket science most high street watchmaker could do test to 200-300m.And if it passes that test all the oyster range will be find for scuba and all other water like shower etc.But today reading the many posts on TRF many are afraid to even get there watches wet.

tattooedfagin · 4 October 2011, 03:44 AM

i'd rather leave it to an expert

2 October 2011, 08:58 AM	#1
Mondo Member Join Date: Aug 2010 Location: Texas Posts: 243	How many of you open your rolex backs (for whatever reason)? I have a Pepsi coming in from an Internet purchase and am wanting to open it up once it arrives to ensure it's authenticity. Should I gobto my ad or open it up myself. What are the dangers if I do it myself?

2 October 2011, 09:11 AM	#2
smallcandle "TRF" Member Join Date: Mar 2009 Real Name: Brian Location: Kansas Watch: 16610, Omega PO Posts: 1,898	If you don't have the proper tool or experience I would suggest going to an AD or well-respected watchmaker. __________________ Things got out of control and I had to stab a clown...

2 October 2011, 09:39 AM	#5
HL65 TRF Moderator & 2024 SubLV41 Patron Join Date: Dec 2007 Real Name: Ken Location: SW Florida Watch: One on my wrist. Posts: 63,991	I always open up my vintage watches - no reason on modern ones IMHO. __________________ *SPEM SUCCESSUS ALIT*

2 October 2011, 09:54 AM	#7
Dan Pierce 2024 Pledge Member Join Date: Dec 2006 Real Name: D'OH! Location: Kentucky Watch: Rolex-1 Tudor-3 Posts: 36,185	Only on my Seiko's where any margin of error is less dramatic. dP __________________ TRF Member# 1668 Bass Player in TRF "AFTER DARK" Bar & NightClub Band Commander-in-Chief of The Nylon Nation The Crown & Shield Club Honorary Member of P-Club

2 October 2011, 09:56 AM	#8
HL65 TRF Moderator & 2024 SubLV41 Patron Join Date: Dec 2007 Real Name: Ken Location: SW Florida Watch: One on my wrist. Posts: 63,991	PS- Having the right tools and knowing what you are doing is a given! __________________ *SPEM SUCCESSUS ALIT*

2 October 2011, 09:16 AM	#3
Speed "TRF" Member Join Date: Aug 2009 Location: USA Posts: 19,706	I wouldn't do it. If you don't have the right tool, I could see you chewing up the teeth on the caseback. Would you know what to look for if you were to open up the watch?

2 October 2011, 09:33 AM	#4
kilyung 2024 SubLV41 Pledge Member Join Date: Jul 2009 Location: Cave Watch: Sundial Posts: 33,940	Without the right tools, you risk damaging the caseback. You also risk damaging the caseback gasket. You'll also need to check water resistance of the reassembled case. Unless you're ready to sink $5k+ on tools, take it to a watchmaker.

2 October 2011, 12:02 PM	#9
MY-WATCH "TRF" Member Join Date: Jul 2010 Real Name: Sala hu din Location: N/A Posts: 1,781	Take it to AD

2 October 2011, 12:05 PM	#10
Rolex Junky Banned Join Date: Apr 2010 Real Name: Lorenzo Location: Netherlands Watch: 116710LN & 116201 Posts: 849	Does the back open?

2 October 2011, 12:32 PM	#12
MortgageGuy "TRF" Member Join Date: Jun 2009 Real Name: Adam Location: Orlando, Florida Watch: Me Posts: 9,935	Take it to your AD, it will take a moment or two and no questions or concerns __________________ The richest people in the world look for and build NETWORKS, Everyone else looks for work... Robert Kiyosaki

2 October 2011, 12:36 PM	#13
humvee Banned Join Date: Sep 2011 Location: Los Angeles Posts: 451	There is no good reason for anyone to be opening the caseback of their rolex. You're asking for trouble. Somethings are better left alone or to the pros.

2 October 2011, 02:27 PM	#14
Mondo Member Join Date: Aug 2010 Location: Texas Posts: 243	Thanks for all the info. The AD it is. Thanks again Mondo

2 October 2011, 02:44 PM	#15
SkyKing31 "TRF" Member Join Date: Nov 2010 Location: Manalapan Florida Watch: Tridor Masterpiece Posts: 2,819	Better off taking it to the AD of a watchmaker

2 October 2011, 08:40 PM	#16
Darlinboy 2024 SubLV41 Pledge Member Join Date: Apr 2011 Real Name: DB Location: :noitacoL Watch: :hctaW Posts: 6,701	You're smart to check out a new purchase, but unless you have the tools and know-how... get thee to a professional! __________________ Lorem ipsum dolor sit amet, consectetur adipiscing elit.

2 October 2011, 09:02 PM	#18
jezza17 "TRF" Member Join Date: Nov 2009 Real Name: Alex Location: Sydney, Australia Watch: DRSD Posts: 511	best to take it to an AD or an authorised and trusted watchmaker.

2 October 2011, 09:21 PM	#20
jamesbondOO7 "TRF" Member Join Date: Oct 2010 Real Name: BondJamesBond Location: The Algarve Watch: Rolex or nothing Posts: 4,077	I don't even open the bonnet of the car, why would I open my watch? __________________ ♛ 5-digit Rolex or nothing ♛

2 October 2011, 10:30 PM	#21
Rags 2024 Pledge Member Join Date: Jan 2009 Real Name: Chuck Location: SW Florida Watch: 16233,16610,214270 Posts: 11,196	I guess if I had the proper tools I would but since I don't I won't... Hey I made a funny... __________________ 16233 Y Serial Datejust 16610 Z Serial Submariner 214270 Explorer *114300 Oyster Perpetual* *76200 Tudor Date+Day*

2 October 2011, 10:40 PM	#22
travisb 2024 SubLV41 Pledge Member Join Date: Aug 2009 Real Name: Travis Location: FL / NYC Watch: Yes.. Posts: 33,430	Do NOT do it yourself.. Take it to your AD or experienced watchmaker.

3 October 2011, 01:25 AM	#23
tictic "TRF" Member Join Date: Sep 2008 Real Name: Mark Location: New England USA Watch: 124060 Posts: 128	Opening is not the issue... making sure it is waterproof after closing it up is another matter. Are you willing to take that chance?

3 October 2011, 01:41 AM	#24
Andelain "TRF" Member Join Date: Jul 2011 Location: The Sandbox Watch: ing your 6...... Posts: 1,379	When I bought my T-Bird recently from ebay I also got online and ordered an LG Openall. We don't exactly have AD's and watch repair shops over here, so I was on my own. I paid real close attention to what I was doing, and once it was open I snapped some pics to post in Watchout, then closed it back up real carefully. T-Bird proved to be real, and it's no worse for the experience. __________________ .

3 October 2011, 01:53 AM	#25
Like To Watch "TRF" Member Join Date: Aug 2011 Location: Sydney Australia Posts: 1,196	No way.

3 October 2011, 05:28 AM	#26
siewmaiwatch "TRF" Member Join Date: Aug 2011 Location: Macau Watch: 16610LV 14060m Posts: 399	Not unless you know what you are doing, and what you are looking for once opened. Otherwise, risks are not necessary. Leave it to the pros.

4 October 2011, 02:00 AM	#27
SteKos Member Join Date: Mar 2009 Location: Wisconsin Posts: 150	Without the right tools, which are fairly costly, you'll probably never even get it open. The backs are on very tight. Of course, opening the case is the best way to insure it's got a real movement, any watchmaker should have the tools to open it, and should know what a real one looks like. I doubt an AD would open it for you just to verify. That said, I have opened mine. I don't go with the "Only Rolex can open it" thing. It's mine, if I wanna pop it open, I will. Did it with an Exp II that I got in a trade, just to be 100% sure. But I have the tool and the movement holder. And I make sure the seal is clean before closing it. No, it's not pressure tested, but for what I use it for, I'm 99.999% sure it will survive till the next maintenance.

4 October 2011, 02:15 AM	#28
chronoman "TRF" Member Join Date: Dec 2010 Location: Midwest, U.S.A. Watch: 116520 & 3570.50 Posts: 255	Sure, but let's put it this way, my friendly Rolex watchmaker is the only tool i need. I've seen my Daytona in hundreds of bits, as the crystal was broke prior to my ownership. It was just far easier to observe.

4 October 2011, 03:44 AM	#30
tattooedfagin "TRF" Member Join Date: Jan 2010 Real Name: Chad Location: the neighbourhood Watch: 1680 Red Posts: 2,262	i'd rather leave it to an expert __________________ SS Sub Date (F) DSSD (V) Red Sub (Mk4) TRF Hall of Fame

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode