ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

zeeww · 6 January 2013, 07:45 AM

Hi guys,

Is there a set sequence in links removal on the oyster bracelet?

Just got my DJII recently and asked for 1 link to be removed, and noticed (after I walked out of the shop) that the link removed was from the 6o'clock side of the bracelet, instead of one from the 12 o'clock side.

Reason I asked is that the watch came with 7(or 8?) links on the 12 o'clock side, and 5(or 6?) links on the 6o'clock side. Now with 1 link removed from the 6o'clock side, it made the clasp (when closed) nearer to the 6 o'clock side, is this normal?

I'd have thought that removing 1 from the 12 o'clock side would make this abit more even?

Thanks

zeeww · 6 January 2013, 08:25 AM

Bump...

TimeToGo · 6 January 2013, 08:26 AM

Welcome to the forum!

As you say, if it was longer on one side, you should've had one removed there.

You can take it back and tell them.

joe100 · 6 January 2013, 08:35 AM

I adjust mine to fit for comfort.

TimeToGo · 6 January 2013, 08:37 AM

Don't forget to place "loctite" on the screw, if you decide to do it yourself.

zeeww · 6 January 2013, 08:54 AM

Ok thanks, will probably take it to the rolex boutique which is closer to me, see if try kind doing me the favour.

Hopefully they use loctite too!

NYresq · 6 January 2013, 09:26 AM

I just had a link removed from my DSSD and they took it off the 12 side. But I also planned on opening up the glide clasp a couple notches so it looks balanced again. But as a rule with most of my watches the 12 side is either equal to the 6 if its an even number of links or if odd, it goes on the 12 side, but never more then one extra. I think 2 extra on the 12 side would make it ride uneven and cocked to the inside of my wrist.

77T · 6 January 2013, 09:31 AM

The AD should have observed where the clasp was meeting the underside of your wrist before choosing the link to remove. Then a post adjustment fitment to confirm the work.

There is no single "right" answer - the objective is to get the head centered on the top and the clasp centered on the bottom of your wrist.

Andad · 6 January 2013, 12:08 PM

IMO removing the link from the six o'clock side is bestto start with as this helps to centre the clasp which in turns stops the head from moving away and down from its position.

zeeww · 6 January 2013, 05:11 PM

The clasp after removal of the link is now not quite centre on the bottom of my wrist. The head is sitting quite still on top and wearing it like this doesn't really move the head a lot, apart from the clasp looking off-centre.

I'll go into rolex boutique tomorrow and see what they say.

Venusfly · 7 January 2013, 02:15 AM

Quote:

Originally Posted by timetogo

welcome to the forum!

As you say, if it was longer on one side, you should've had one removed there.

You can take it back and tell them.

+1

6 January 2013, 07:45 AM	#1
zeeww "TRF" Member Join Date: Dec 2012 Location: London Posts: 205	Removing link on oyster bracelet Hi guys, Is there a set sequence in links removal on the oyster bracelet? Just got my DJII recently and asked for 1 link to be removed, and noticed (after I walked out of the shop) that the link removed was from the 6o'clock side of the bracelet, instead of one from the 12 o'clock side. Reason I asked is that the watch came with 7(or 8?) links on the 12 o'clock side, and 5(or 6?) links on the 6o'clock side. Now with 1 link removed from the 6o'clock side, it made the clasp (when closed) nearer to the 6 o'clock side, is this normal? I'd have thought that removing 1 from the 12 o'clock side would make this abit more even? Thanks

6 January 2013, 08:35 AM	#4
joe100 2024 SubLV41 Pledge Member Join Date: Nov 2007 Real Name: Joe Location: New Mexico Watch: Explorer Posts: 12,838	I adjust mine to fit for comfort. __________________ It's Espresso, not Expresso. Coffee is not a train in Italy. -TRF Member 6982-

6 January 2013, 09:31 AM	#8
77T 2024 SubLV41 Pledge Member Join Date: Dec 2010 Real Name: PaulG Location: Georgia Posts: 41,941	The AD should have observed where the clasp was meeting the underside of your wrist before choosing the link to remove. Then a post adjustment fitment to confirm the work. There is no single "right" answer - the objective is to get the head centered on the top and the clasp centered on the bottom of your wrist. __________________ Does anyone really know what time it is?

6 January 2013, 12:08 PM	#9
Andad 2024 SubLV41 Pledge Member Join Date: Nov 2006 Real Name: Eddie Location: Australia Watch: A few. Posts: 37,497	IMO removing the link from the six o'clock side is bestto start with as this helps to centre the clasp which in turns stops the head from moving away and down from its position. __________________ E

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

6 January 2013, 08:25 AM	#2
zeeww "TRF" Member Join Date: Dec 2012 Location: London Posts: 205	Bump...

6 January 2013, 08:26 AM	#3
TimeToGo 2024 SubLV41 Pledge Member Join Date: Sep 2008 Location: North Florida Posts: 16,715	Welcome to the forum! As you say, if it was longer on one side, you should've had one removed there. You can take it back and tell them.

6 January 2013, 08:37 AM	#5
TimeToGo 2024 SubLV41 Pledge Member Join Date: Sep 2008 Location: North Florida Posts: 16,715	Don't forget to place "loctite" on the screw, if you decide to do it yourself.

6 January 2013, 08:54 AM	#6
zeeww "TRF" Member Join Date: Dec 2012 Location: London Posts: 205	Ok thanks, will probably take it to the rolex boutique which is closer to me, see if try kind doing me the favour. Hopefully they use loctite too!

6 January 2013, 09:26 AM	#7
NYresq "TRF" Member Join Date: Oct 2011 Real Name: Mark Location: USA Watch: DSSD, TT Serti Sub Posts: 31	I just had a link removed from my DSSD and they took it off the 12 side. But I also planned on opening up the glide clasp a couple notches so it looks balanced again. But as a rule with most of my watches the 12 side is either equal to the 6 if its an even number of links or if odd, it goes on the 12 side, but never more then one extra. I think 2 extra on the 12 side would make it ride uneven and cocked to the inside of my wrist.

6 January 2013, 05:11 PM	#10
zeeww "TRF" Member Join Date: Dec 2012 Location: London Posts: 205	The clasp after removal of the link is now not quite centre on the bottom of my wrist. The head is sitting quite still on top and wearing it like this doesn't really move the head a lot, apart from the clasp looking off-centre. I'll go into rolex boutique tomorrow and see what they say.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)