ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

shaggy · 12 March 2009, 08:58 PM

i have been thinking of getting a winder but am worried it may damage my watch
i read a bit of info (from a winder salesperson) that if you dont get the proper winds per day you can either underwind making the winder useless or overwind putting undue stress on your watch
it said something along the lines of "find out how many winds a day and buy a winder that does that ie: 750 850 950 etc
im thinking of buying a couple of tool watches seiko or casio automatics

so
how many winds a day does a sub date need to keep it going without over doing it?
or is this just a sales strategy?

louie · 12 March 2009, 09:07 PM

i have been thinkin abt it too...is it advisable to put our automatic Rolexes on winder?

Tools · 13 March 2009, 05:03 AM

The winder Salesperson you talked to was giving absolutely wrong information..

You cannot over-wind a Rolex on a winder (or any other self-wind watch for that matter). Once the watch is wound, the mainspring slips in it's housing just like it would if worn on your wrist..

You can "under-wind", but this only means that the watch will not have a full power reserve when you put it on. Since winders are on timers generally, it might also mean that it may not have enough power reserve to last it through the time the winder is turned of....say a few hours..

For a Rolex with about a 50 hour power reserve, most winders will work fine with about 650 rotations per day. For the Daytona etc, with a 72 hr power reserve, you might need 900 rotations........but it will still stay wound at 650..

Rolex watches wind in either direction with the exception of the Zenith which winds CW.

louie · 13 March 2009, 05:27 AM

okay,so Larry you got a winder at your place....

Tools · 13 March 2009, 05:35 AM

Quote:

Originally Posted by louie

okay,so Larry you got a winder at your place....

I don't use a winder for any of my watches...and I have quite a few.. I have a couple of older non-quickset models that take a few minutes to set, but generally, I don't mind the half minute it takes each time I change..

There is also no sound technical basis for keeping a watch running all the time.. but some are more comfortable with that than others..

louie · 13 March 2009, 05:40 AM

Quote:

Originally Posted by Tools

I don't use a winder for any of my watches...and I have quite a few.. I have a couple of older non-quickset models that take a few minutes to set, but generally, I don't mind the half minute it takes each time I change..

There is also no sound technical basis for keeping a watch running all the time.. but some are more comfortable with that than others..

thanks Larry for the quick answer! so now i can TOTALLY forget the idea of getting one...(been thinkin quite a while now)

i will just take them out and wind them one by one once in a while.

shaggy · 13 March 2009, 09:39 AM

hanks larry
pointless getting one i think as like you say its a minute to chage the time/date etc

12 March 2009, 08:58 PM	#1
shaggy "TRF" Member Join Date: Dec 2008 Real Name: Brett Location: leeds,uk Watch: BLUE ARAB DAYTONA Posts: 691	rolex & watch winder i have been thinking of getting a winder but am worried it may damage my watch i read a bit of info (from a winder salesperson) that if you dont get the proper winds per day you can either underwind making the winder useless or overwind putting undue stress on your watch it said something along the lines of "find out how many winds a day and buy a winder that does that ie: 750 850 950 etc im thinking of buying a couple of tool watches seiko or casio automatics so how many winds a day does a sub date need to keep it going without over doing it? or is this just a sales strategy?

12 March 2009, 09:07 PM	#2
louie "TRF" Member Join Date: May 2008 Real Name: Lewis Location: Earth Watch: The Beast Posts: 1,352	i have been thinkin abt it too...is it advisable to put our automatic Rolexes on winder? __________________ " I THINK PERFECTION IS UGLY. SOMEWHERE IN THE THINGS HUMANS MAKE, I WANT TO SEE SCARS, FAILURE, DISORDER AND DISTORTION" - YOHJI YAMAMOTO

13 March 2009, 05:03 AM	#3
Tools TRF Moderator & 2024 SubLV41 Patron Join Date: May 2007 Real Name: Larry Location: Mojave Desert Watch: GMT's Posts: 43,514	The winder Salesperson you talked to was giving absolutely wrong information.. You cannot over-wind a Rolex on a winder (or any other self-wind watch for that matter). Once the watch is wound, the mainspring slips in it's housing just like it would if worn on your wrist.. You can "under-wind", but this only means that the watch will not have a full power reserve when you put it on. Since winders are on timers generally, it might also mean that it may not have enough power reserve to last it through the time the winder is turned of....say a few hours.. For a Rolex with about a 50 hour power reserve, most winders will work fine with about 650 rotations per day. For the Daytona etc, with a 72 hr power reserve, you might need 900 rotations........but it will still stay wound at 650.. Rolex watches wind in either direction with the exception of the Zenith which winds CW. __________________ (Chill ... It's just a watch Forum.....) NAWCC Member

13 March 2009, 05:27 AM	#4
louie "TRF" Member Join Date: May 2008 Real Name: Lewis Location: Earth Watch: The Beast Posts: 1,352	okay,so Larry you got a winder at your place.... __________________ " I THINK PERFECTION IS UGLY. SOMEWHERE IN THE THINGS HUMANS MAKE, I WANT TO SEE SCARS, FAILURE, DISORDER AND DISTORTION" - YOHJI YAMAMOTO

13 March 2009, 09:39 AM	#7
shaggy "TRF" Member Join Date: Dec 2008 Real Name: Brett Location: leeds,uk Watch: BLUE ARAB DAYTONA Posts: 691	hanks larry pointless getting one i think as like you say its a minute to chage the time/date etc

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)