The Rolex Forums   The Rolex Watch

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX


Go Back   Rolex Forums - Rolex Forum > Rolex & Tudor Watch Topics > Rolex WatchTech

Reply
 
Thread Tools Display Modes
Old 4 August 2022, 07:36 AM   #1
Rolexrolexrolexxx
"TRF" Member
 
Join Date: Jul 2022
Real Name: Larry
Location: Mesa az
Watch: 5 Digit SD 16600
Posts: 10
16610 Submariner stopped working while being on my wrist 24/7

Had my new to me V serial 16610LN for a few weeks without any problems, never really wound it as it was delivered running and on time but this is first rolex ive owned that just ran out of reserve while wearing it? Any ideas? Or suggestions would be greatly appreciated
Rolexrolexrolexxx is offline   Reply With Quote
Old 4 August 2022, 07:58 AM   #2
Tools
TRF Moderator & 2024 SubLV41 Patron
 
Tools's Avatar
 
Join Date: May 2007
Real Name: Larry
Location: Mojave Desert
Watch: GMT's
Posts: 43,492
Wind it.

Wearing it isn't what winds it, activity does. It is very common for the watch to stop on your wrist if you are inactive for the day.

Each day you need to put 24 hours of wind into it just to keep it at a static wind. Any less and it will eventually stop.
__________________
(Chill ... It's just a watch Forum.....)
NAWCC Member
Tools is offline   Reply With Quote
Old 4 August 2022, 11:42 PM   #3
Smobews
"TRF" Member
 
Join Date: Aug 2020
Location: Usa
Watch: The BIG ones
Posts: 515
It sounds like it needs a service. It shouldn't stop if worn 24/7
Smobews is offline   Reply With Quote
Old 5 August 2022, 01:10 AM   #4
Albertfrank
"TRF" Member
 
Join Date: Jul 2022
Location: Dayton
Posts: 10
It’s best to always keep your Rolex on a 24 hour wind but if that’s not the problem I guess it probably needs servicing
Albertfrank is offline   Reply With Quote
Old 6 August 2022, 09:41 PM   #5
Sunny Arizona
"TRF" Member
 
Sunny Arizona's Avatar
 
Join Date: Jul 2007
Real Name: Brad
Location: Colorado
Watch: 16613
Posts: 1,263
Ridley is in Mesa. Stop by and get a quote.




Quote:
Originally Posted by Rolexrolexrolexxx View Post
Had my new to me V serial 16610LN for a few weeks without any problems, never really wound it as it was delivered running and on time but this is first rolex ive owned that just ran out of reserve while wearing it? Any ideas? Or suggestions would be greatly appreciated
__________________
2 Factor Authentication
Sunny Arizona is offline   Reply With Quote
Old 8 August 2022, 02:03 AM   #6
Drrich1101
"TRF" Member
 
Join Date: Aug 2022
Location: USA NY
Posts: 2
I’m not an expert, but I’ve had my sub since new- 20 years ago……. and worn it pretty much 24/7/365. It’s never stopped while being worn. I too would suggest service if it happens again.
Drrich1101 is offline   Reply With Quote
Old 25 November 2022, 10:35 PM   #7
SOG DIVER
"TRF" Member
 
SOG DIVER's Avatar
 
Join Date: Jan 2019
Real Name: LtCol R
Location: Mtns-NM-MT
Watch: 1680Red-551214060M
Posts: 274
Larry probably made a most accurate observation.

Another question that arises: the earlier references vs. later 18,000-19K
vs the 28 K. beat rate ones.
Comparing my 1680 red Submariner and 5512 to a 16610 and 14060M:
it seems the 1680 is more tolerant of relative inactivity than the 16610.

There is also the factor of age. The 1680 was an original purchase in Hong Kong - 1971.
As we age, our activity level may quietly be reduced.
An Oyster Perpetual may be the best exercise monitor.
SOG DIVER is offline   Reply With Quote
Old 25 November 2022, 10:57 PM   #8
MrGoat
2024 SubLV41 Pledge Member
 
MrGoat's Avatar
 
Join Date: Jun 2020
Real Name: Goat
Location: Southwest Florida
Watch: 16613
Posts: 5,411
I just had the same issue albeit 2.5 yrs into 24/7/365 worn ownership of my 16613LB.

Looked down and realized I was an hour behind. Shook it and it started ticking again so went to take a shower. Looked down again in 5 mins or so and dead again. Tried winding it, it wouldn’t wind.

Took it to Rik Dietel and found out it had never been serviced.

If you are fairly active it probably needs a service. Realistically, if no provenance it needs a service anyways as yours could be like mine and never serviced.


Sent from my Apple privacy invasion product
MrGoat is offline   Reply With Quote
Old 26 November 2022, 07:15 AM   #9
Dirt
"TRF" Member
 
Join Date: Mar 2012
Location: Brisbane
Watch: DSSD
Posts: 8,053
Quote:
Originally Posted by MrGoat View Post
I just had the same issue albeit 2.5 yrs into 24/7/365 worn ownership of my 16613LB.

Looked down and realized I was an hour behind. Shook it and it started ticking again so went to take a shower. Looked down again in 5 mins or so and dead again. Tried winding it, it wouldn’t wind.

Took it to Rik Dietel and found out it had never been serviced.

If you are fairly active it probably needs a service. Realistically, if no provenance it needs a service anyways as yours could be like mine and never serviced.


Sent from my Apple privacy invasion product
Agreed.
I normally don't get much more than 5-5.5 years out of a daily worn auto winder before it needs a service to put it right.
Usually they stop randomly or altogether so it's the winding mechanism that starts playing up due to my activity levels.
Timekeeping is always very good and unchanged with the exception of one watch that went about 13 years until it's first service as an occasional wearer before timekeeping started to progressively shift and one could also see the ball bearing mounted Rotor starting to get a little sluggish on rotation through the Saphire caseback.
A service puts them right as one would expect
Dirt is offline   Reply With Quote
Old 26 November 2022, 06:47 PM   #10
50L
"TRF" Member
 
Join Date: Nov 2022
Location: belgium
Posts: 21
I keep mine on 24 7, even in the shower or bath. I also go to the gym with it. I workout 5 times a day so I guess maybe this is why it never runs out. Only take it off if I go running.

in summer I never wear it when doing fitness because I have some kind of small allergy when I start sweating all day because of the weather but it never runs out.
50L is offline   Reply With Quote
Old 7 December 2022, 07:26 AM   #11
Jhertzy
Banned
 
Join Date: Jul 2014
Location: USA
Posts: 24
Quote:
Originally Posted by Smobews View Post
It sounds like it needs a service. It shouldn't stop if worn 24/7

Exactly!
Jhertzy is offline   Reply With Quote
Old 7 December 2022, 06:31 PM   #12
padi56
"TRF" Life Patron
 
padi56's Avatar
 
Join Date: Jun 2005
Real Name: Peter
Location: Llanfairpwllgwyng
Watch: ing you.
Posts: 53,028
Quote:
Originally Posted by Smobews View Post
It sounds like it needs a service. It shouldn't stop if worn 24/7
As Larry stated wearing a watch dont wind the watch its wrist activity that makes the winding pendulum swing to wind the watch.And will add it will do no harm whatsoever to give full manual wind once a week or so to keep mainspring at peak power.
__________________

ICom Pro3

All posts are my own opinion and my opinion only.

"The clock of life is wound but once, and no man has the power to tell just when the hands will stop. Now is the only time you actually own the time, Place no faith in time, for the clock may soon be still for ever."
Good Judgement comes from experience,experience comes from Bad Judgement,.Buy quality, cry once; buy cheap, cry again and again.

www.mc0yad.club

Second in command CEO and left handed watch winder
padi56 is offline   Reply With Quote
Old 8 December 2022, 06:57 AM   #13
forgedblades
"TRF" Member
 
forgedblades's Avatar
 
Join Date: Dec 2014
Real Name: Dave
Location: Memphis
Watch: 16610LV/CokeGMT II
Posts: 396
Broken main spring i would suspect
forgedblades is offline   Reply With Quote
Old 13 December 2022, 07:37 AM   #14
Rolexrolexrolexxx
"TRF" Member
 
Join Date: Jul 2022
Real Name: Larry
Location: Mesa az
Watch: 5 Digit SD 16600
Posts: 10
Thank you for all the replies, a good service at coffin&trout AD in chandler Az fixed it right up
Rolexrolexrolexxx is offline   Reply With Quote
Old 31 December 2022, 01:33 AM   #15
SearChart
TechXpert
 
SearChart's Avatar
 
Join Date: May 2012
Location: Earth
Posts: 23,629
Quote:
Originally Posted by Rolexrolexrolexxx View Post
Thank you for all the replies, a good service at coffin&trout AD in chandler Az fixed it right up
__________________
Quote:
Originally Posted by GB-man View Post
Rolex uses rare elves to polish the platinum. They have a union deal and make like $90 per hour and get time and half on weekends.
SearChart is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Asset Appeal

Wrist Aficionado

DavidSW Watches

Takuya Watches

My Watch LLC

OCWatches


*Banners Of The Month*
This space is provided to horological resources.





Copyright ©2004-2024, The Rolex Forums. All Rights Reserved.

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Rolex is a registered trademark of ROLEX USA. The Rolex Forums is not affiliated with ROLEX USA in any way.