Watchwinder question

[DJlove]

Received a wolf winder as a gift and rolex is recommended fir 650 turns per day bidirectional. Apparently bidirectional doubles the tpd so my question on the bottom was basically what setting to turn it to and they told me 1300 tpd was the answer. Not sure if i trust this. I called Wolf as well and they said the same thing



Sent from my iPhone using Tapatalk

[Rolexken]

I’ll be very interested to see how others answer this. My winder is set to bi-directional and it turns 30 times every 30 minutes first one way then the other so 60 turns per hour.

I have it on a timer switch running 0800 to 1800 so the watch gets 600tpd. This keeps both my “650tpd” Rolex watches running no problem.

I would set your winder to a low setting and see what happens - if your watch stops then increase the tpd. But very interested in other’s views.

[Rolexken]

I’ve always thought 650tpd bi directional meant 325 turns clockwise and 325 turns anti-clockwise not 650 turns each way but happy to learn otherwise.

[SilverStar]

Here is my interaction with Wolf:

Q. I ordered your WOLF 270102 Heritage Double Watch Winder after seeing great reviews. I own Tudor, Rolex and Longines watches and your website recommends 650 tbd bi-directional for all of them. I am trying to make sure I am using the correct setting and the information I came across on the internet is a little confusing. Can I use this winder with those watches or it over wind them? If so, is C the right setting for the rotation? Does the watch turn 1800 tbd or still 900 in that setting?

A.Thank you for contacting WOLF - I can certainly help you with this.

The Heritage model pairs perfectly with your timepiece collection if they are require 650 TPD Bidirectional. Your winder requires to be on the 'C' setting as it will double the number of turns per day to 1,800.

Let me know if you have additional questions.

It been almost 5 years and the watches have not exploded.

[OG1982]

Only watches I see benefit in using a winder would be a perpetual calendar.

Time and date watches take seconds to wind and set, and gives me a chance to properly interact with the mechanical marvel, before I strap it on and go about my day.


Sent from my iPhone using Tapatalk

[WilsdorfNDavis]

Originally Posted by OG1982

Only watches I see benefit in using a winder would be a perpetual calendar.

^^^This is the only correct answer when it comes to watch winders.

Originally Posted by OG1982

Time and date watches take seconds to wind and set, and gives me a chance to properly interact with the mechanical marvel, before I strap it on and go about my day.

If watch manufacturers felt you needed a watch winder they would insist you buy their branded watch winder with every purchase. Have you ever seen a Rolex, Patek, AP or Vacheron factory watch winder?
There's your answer.

[Tools]

Rolex says 650 turns to keep a watch wound, and it can be turned in either direction to wind it (bi-directional)

Typically you set a winder on the lowest setting, then if it stops while on the winder you set it up to the next setting.

[Rolexken]

This thread is asking about using winders, not whether to use them or not.

[Jack T]

A winder serves no purpose for me. I wear a watch or two for a week, then put it away for a month or two.

[daysky1]

If you have a watch Winder and you want to use it feel free it's not going to hurt your watch. I commend you for attempting to sort out which setting to use and being careful to make sure that you appropriately set it. Personally I have four wolf winders each one of them are a two watch Winder. Since I cleared out room in my safe I now have a large Shelf that's carpeted that I keep my watches on so my winders aren't being used at this time. I try to give all of my watches time on my wrist which negates the use of a Winder because I have more watches and I don't want to miss out on enjoying any one of my watches on my wrist. Maybe someday I'll start using my winders again but not today.

[Mystro]

650 TPD bi-directional is what I have used for over 30 years for my Rolex watches. Orbita was the brand for most of the time until I had a beautiful large customer multi head winder made. 800 TPD bi-directional is what most of my chronographs use including the Daytona.

Wont go into my TT Sub that ran non stop on a winder or wrist for 15 years constantly. At the 15 year mark I did a routine service, even though the watch didn’t need one and there were no additional wear on the movement reported by a well respected forum watchmaker that did the service. In fact he said the movement looked great inside.

[SkyDFan]

From ChatGPT:

If a watch winder is set to 650 turns per day (TPD) bi-directional, the actual number of turns per day is 650 TPD. Here’s why:

Definition of TPD:

TPD refers to the total number of rotations the winder performs in a 24-hour period, regardless of direction.

Bi-Directional Setting:

A bi-directional winder alternates between clockwise (CW) and counterclockwise (CCW) rotations.

For a 650 TPD bi-directional setting, the winder splits the 650 rotations between the two directions, typically with 325 turns clockwise and 325 turns counterclockwise.

Total Turns:

Since TPD measures the total turns (CW + CCW), the actual value remains 650 TPD, not 1,300 or double.

This setting is designed for watches that require winding in both directions. If you need further clarification or have a specific watch model in mind, feel free to ask!

[Andad]

Wow.

[Carguy87]

For my Rolex watches I’ve found 700 TPD on my wolf winders seem to be perfect.