ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Bradskyd · 25 November 2018, 08:18 AM

Hi Guys,

After reading a thread on this forum, I was under the impression that Rolex has patented the screw on the Sky-Dweller so that the coronet logo on the crown would always point upwards in the tightened position.

However after purchasing my new SD today I've noticed the crown is pointing downwards when fully tightened. I've also noticed this is the case with a few of the Sky Dwellers on Watch Finder.

Please can someone shed some light on this?

Mine is a 2018 Sky Dweller Two Tone (gold/steel).

Thanks in advance.

Chewbacca · 25 November 2018, 08:19 AM

It’s a rare Australian market version.

Congrats!

Bradskyd · 25 November 2018, 08:25 AM

Thanks! So what does this mean? So some of the other watches on watchfinder are from Australia also?

v8plus4 · 25 November 2018, 08:28 AM

I believe only the all-gold Sky-D crowns line up, not the SS or two-tone models.

Scottosan · 25 November 2018, 08:29 AM

Send it to me
I'll fix it

Bradskyd · 25 November 2018, 08:31 AM

Quote:

Originally Posted by v8plus4

I believe only the all-gold Sky-D crowns line up, not the SS or two-tone models.

Ah ok thanks

peterpl · 25 November 2018, 08:48 AM

Your one is the Twin Tone that is why.

You need to buy the full precious metal versions for the patent to be applied. Been discussed many times.

GradyPhilpott · 25 November 2018, 09:49 AM

Picture or it didn't happen.

DoctorA · 25 November 2018, 09:52 AM

Mine doesn’t line up! And it really doesn’t matter!

jfestrelabr · 25 November 2018, 10:22 AM

Only full Gold Sky have this feature

Enviado do meu iPhone usando Tapatalk

Brenngun · 25 November 2018, 10:39 AM

It's not supposed to line up.

Boaters · 25 November 2018, 10:42 AM

One tough crowd ...lol

bradyb · 25 November 2018, 12:55 PM

Unscrew your crown until it lines up the way you want it to. An easy solution!

Chilly Coconut · 25 November 2018, 01:30 PM

Quote:

Originally Posted by Bradskyd

Thanks! So what does this mean? So some of the other watches on watchfinder are from Australia also?

He was being facetious.

Macnavara · 25 November 2018, 06:19 PM

Quote:

Originally Posted by v8plus4

I believe only the all-gold Sky-D crowns line up, not the SS or two-tone models.

This

padi56 · 25 November 2018, 06:42 PM

With today's many alignment point syndromes perhaps Rolex should do all these guys a favour get rid of the crown emblem then everyone's crown would line up somewhere.

joli160 · 25 November 2018, 08:01 PM

Only the full Gold models have this beautifully engineered feat and are always aligned.

phez · 25 November 2018, 10:05 PM

Quote:

Originally Posted by Bradskyd

Hi Guys,

After reading a thread on this forum, I was under the impression that Rolex has patented the screw on the Sky-Dweller so that the coronet logo on the crown would always point upwards in the tightened position.

However after purchasing my new SD today I've noticed the crown is pointing downwards when fully tightened. I've also noticed this is the case with a few of the Sky Dwellers on Watch Finder.

Please can someone shed some light on this?

Mine is a 2018 Sky Dweller Two Tone (gold/steel).

Thanks in advance.

Only the PM ones have that. SS and TT dont

1William · 25 November 2018, 10:42 PM

I have two Sky-Dwellers, one YG and the other SS, and I have never even looked at the crown to see if it lines up. In the end it does not matter to me and I can line it up if I choose.

HogwldFLTR · 25 November 2018, 11:37 PM

Quote:

Originally Posted by Bradskyd

Thanks! So what does this mean? So some of the other watches on watchfinder are from Australia also?

Quote:

Originally Posted by v8plus4

I believe only the all-gold Sky-D crowns line up, not the SS or two-tone models.

It only works on the PM SkyDs.

GoingPlaces · 25 November 2018, 11:53 PM

Quote:

Originally Posted by Bradskyd

Thanks! So what does this mean? So some of the other watches on watchfinder are from Australia also?

Correct, Australia only. Good luck.

Alpino · 26 November 2018, 12:00 AM

Quote:

Originally Posted by v8plus4

I believe only the all-gold Sky-D crowns line up, not the SS or two-tone models.

Quote:

Originally Posted by peterpl

Your one is the Twin Tone that is why.
You need to buy the full precious metal versions for the patent to be applied. Been discussed many times.

Quote:

Originally Posted by jfestrelabr

Only full Gold Sky have this feature

Quote:

Originally Posted by joli160

Only the full Gold models have this beautifully engineered feat and are always aligned.

Quote:

Originally Posted by phez

Only the PM ones have that. SS and TT dont

Quote:

Originally Posted by HogwldFLTR

It only works on the PM SkyDs.

What is the need to repeat the same (true) thing again and again, once someone gave the answer

bradyb · 26 November 2018, 08:32 AM

Quote:

Originally Posted by Alpino

What is the need to repeat the same (true) thing again and again, once someone gave the answer

Because we're too lazy to read through all the replies? I think that's it.

challer · 28 November 2018, 12:50 AM

Quote:

Originally Posted by v8plus4

I believe only the all-gold Sky-D crowns line up, not the SS or two-tone models.

Has this been confirmed? My SS nearly always aligns, but over torque can result in misalignment.

samson66 · 28 November 2018, 12:52 AM

the posts on here are hilarious!

25 November 2018, 08:18 AM	#1
Bradskyd "TRF" Member Join Date: Nov 2018 Location: London Posts: 3	Rolex Sky-Dweller coronet logo doesn't line up Hi Guys, After reading a thread on this forum, I was under the impression that Rolex has patented the screw on the Sky-Dweller so that the coronet logo on the crown would always point upwards in the tightened position. However after purchasing my new SD today I've noticed the crown is pointing downwards when fully tightened. I've also noticed this is the case with a few of the Sky Dwellers on Watch Finder. Please can someone shed some light on this? Mine is a 2018 Sky Dweller Two Tone (gold/steel). Thanks in advance.

25 November 2018, 09:49 AM	#8
GradyPhilpott 2024 SubLV41 Pledge Member Join Date: Sep 2008 Location: New Mexico Watch: Seiko #SRK050 Posts: 34,447	Picture or it didn't happen. __________________ JJ Inaugural TRF $50 Watch Challenge Winner

25 November 2018, 09:52 AM	#9
DoctorA "TRF" Member Join Date: Oct 2017 Location: USA Posts: 6,545	Mine doesn’t line up! And it really doesn’t matter! __________________ Wear the watch you like, not the one they tell you to wear!

25 November 2018, 10:39 AM	#11
Brenngun 2024 SubLV41 Pledge Member Join Date: Mar 2010 Real Name: Rick Location: Smokin' Heaven Watch: Rolex & Tudor Posts: 3,858	It's not supposed to line up. __________________ Simple solutions solve complexed problems more often than complexed solutions solve simple problems!

25 November 2018, 06:42 PM	#16
padi56 "TRF" Life Patron Join Date: Jun 2005 Real Name: Peter Location: Llanfairpwllgwyng Watch: ing you. Posts: 53,035	With today's many alignment point syndromes perhaps Rolex should do all these guys a favour get rid of the crown emblem then everyone's crown would line up somewhere. __________________ ICom Pro3 All posts are my own opinion and my opinion only. "The clock of life is wound but once, and no man has the power to tell just when the hands will stop. Now is the only time you actually own the time, Place no faith in time, for the clock may soon be still for ever." Good Judgement comes from experience,experience comes from Bad Judgement,.Buy quality, cry once; buy cheap, cry again and again. www.mc0yad.club Second in command CEO and left handed watch winder

25 November 2018, 08:19 AM	#2
Chewbacca Banned Join Date: May 2012 Real Name: CJ Location: Kashyyyk Watch: Kessel Run Chrono Posts: 21,112	It’s a rare Australian market version. Congrats!

25 November 2018, 08:25 AM	#3
Bradskyd "TRF" Member Join Date: Nov 2018 Location: London Posts: 3	Thanks! So what does this mean? So some of the other watches on watchfinder are from Australia also?

25 November 2018, 08:28 AM	#4
v8plus4 "TRF" Member Join Date: Jul 2016 Location: 30-A Watch: it's complicated Posts: 129	I believe only the all-gold Sky-D crowns line up, not the SS or two-tone models.

25 November 2018, 08:29 AM	#5
Scottosan "TRF" Member Join Date: Apr 2017 Location: SFO Posts: 15	Send it to me I'll fix it

25 November 2018, 08:48 AM	#7
peterpl Banned Join Date: Aug 2012 Location: . Posts: 6,692	Your one is the Twin Tone that is why. You need to buy the full precious metal versions for the patent to be applied. Been discussed many times.

25 November 2018, 10:22 AM	#10
jfestrelabr "TRF" Member Join Date: Jul 2009 Real Name: Felipe Location: Brazil Watch: ALL rolex models Posts: 397	Only full Gold Sky have this feature Enviado do meu iPhone usando Tapatalk

25 November 2018, 10:42 AM	#12
Boaters 2024 Pledge Member Join Date: May 2015 Real Name: Mike Location: Pacific Northwest Watch: 116610LV 16710 SD Posts: 10,653	One tough crowd ...lol

25 November 2018, 12:55 PM	#13
bradyb "TRF" Member Join Date: May 2010 Real Name: Brady Location: Austin, TX Watch: GMT Posts: 976	Unscrew your crown until it lines up the way you want it to. An easy solution!

28 November 2018, 12:52 AM	#25
samson66 2024 ROLEX SUBMARINER 41 Pledge Member Join Date: Jul 2013 Real Name: Mike Location: Downy Ocean Hon Watch: my money leaving! Posts: 13,759	the posts on here are hilarious!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)