Breitling cockpit b50 screwdriver

[Danilotiago]

Does somebody have the tool to open a cockpit b50 ?

[RW16610]

Ah, this is a though one. Never knew they had these types of screws back then got some models.

Unfortunately (but thankfully) you're not the first to encounter this. I did some digging and found some hopefully accurate information from someone else on a different forum that faced this challenge and somehow measured the 5 point screw roughly:

As near as I can measure (they're recessed) they're about 1.5mm diameter, with a solid center of about 1.1mm.

He ended up ordering one close to his originally reported outer diameter, but I didn't see any further updates:

Quick update, found one that looks about right (5 point, 1.4mm outer diameter) in China. The owner really doesn't want to send it to Breitling so he's decided to leave it with me until it arrives. I'll update again when it gets here whether it fits or not.

Also check with Bergeon or similar companies to see if they've got anything to fit. If not, it might be some trial and error on Amazon with a few 5 point tools matching the specifications above. I'm not sure if anything from an electronic repair kit would match that and not destroy the screw. If all else fails it'll have to be sent to Breitling, I guess.

[MiamiB]

I found that 5 prong 1.95mm screwdriver works. Not much helping though. It has a proprietary LiPo battery, which is not readily available... Could not source one just yet. Might send it over to dealer after all.