ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

dubyatf · 21 July 2007, 07:51 AM

Any tips on removing the hologram from the back of my new TT sub?

Thanks!

SPACE-DWELLER · 21 July 2007, 07:55 AM

Oh no! Please not a "How do I remove the hologram?" thread again!

If you do a search on "hologram" + "remove" you must get like 10,000 hits.

Try it out!

SPACE-DWELLER · 21 July 2007, 07:57 AM

Well, OKAY then!

I did a search for you!

http://www.rolexforums.com/showthrea...emove+hologram

dubyatf · 21 July 2007, 08:05 AM

Thanks Spacedweller - I usually search first and ask questions later. I did however check the FAQ first!

I'll try in order: See if I can convince it to remove itself; make some threats; sheep-dip; plasma-cutter/blue wrench; then body grinder.

SPACE-DWELLER · 21 July 2007, 08:08 AM

Quote:

Originally Posted by dubyatf

Thanks Spacedweller - I usually search first and ask questions later. I did however check the FAQ first!

I'll try in order: See if I can convince it to remove itself; make some threats; sheep-dip; plasma-cutter/blue wrench; then body grinder.

Don't forget the vanilla smelling "Cape Cod" AKA "Shape Odd" to finish it completely off!

Afterwards, please post the "snuff movie" here!

dubyatf · 21 July 2007, 08:21 AM

Quote:

Originally Posted by Spacedweller

Don't forget the vanilla smelling "Cape Cod" AKA "Shape Odd" to finish it completely off!

Afterwards, please post the "snuff movie" here!

Will do Bo!

Maybe whatever the consensus is on the non-destructive/preferred holo removal technique is - could be added to the FAQ for us noobs?

I'm searching for Shape Odd thread right now - it ought to be entertaining!

Tools · 21 July 2007, 08:40 AM

It's just a sticker dub..

I've saved mine by sliding a razer blade under it a bit and slowly peeling it off...I stick it on the warranty paper work

If I'm not saving it I have a special Rolex Removal tool that leaves a smooth finish:

C.J. · 21 July 2007, 08:48 AM

Hit it with a hair dryer until it gets nice and warm then slowly peel it off and stick it to your papers. Be careful not to touch the printed numbers while it's warm or they'll smudge. A little soap and water will take care of any residual gunk and you're all set

dubyatf · 21 July 2007, 08:53 AM

Thanks for the tip CJ/Tools - I couldn't get my fingernail underneath it and figured I was missing something obvious.

I can't wear the darn thing yet anyway as my AD ordered a link that may take 2 weeks!

I believe the TT links are now made of 'unobtanium' and are shipped via steamer directly from Switzerland to the states!

That said, I've got plenty of time to peruse the 10K-plus posts, and attend a few Holo-Removers Anonymous meetings in the mean time!

21 July 2007, 07:51 AM	#1
dubyatf Member Join Date: Jul 2007 Location: USA Watch: ing the detectives Posts: 265	Hologram Removal Any tips on removing the hologram from the back of my new TT sub? Thanks!

21 July 2007, 07:55 AM	#2
SPACE-DWELLER "TRF" Member Join Date: Apr 2007 Real Name: Bo Location: Denmark Watch: Rolex, of course! Posts: 22,436	Oh no! Please not a "How do I remove the hologram?" thread again! If you do a search on "hologram" + "remove" you must get like 10,000 hits. Try it out! __________________ With kind regards, Bo LocTite 221: The Taming Of The Screw...

21 July 2007, 07:57 AM	#3
SPACE-DWELLER "TRF" Member Join Date: Apr 2007 Real Name: Bo Location: Denmark Watch: Rolex, of course! Posts: 22,436	Well, OKAY then! I did a search for you! http://www.rolexforums.com/showthrea...emove+hologram __________________ With kind regards, Bo LocTite 221: The Taming Of The Screw...

21 July 2007, 08:48 AM	#8
C.J. "TRF" Member Join Date: Jan 2006 Location: * Posts: 10,196	Hit it with a hair dryer until it gets nice and warm then slowly peel it off and stick it to your papers. Be careful not to touch the printed numbers while it's warm or they'll smudge. A little soap and water will take care of any residual gunk and you're all set __________________ Me? I'm still looking for Kokomo. I just hope that damn golfer isn't there

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

21 July 2007, 08:05 AM	#4
dubyatf Member Join Date: Jul 2007 Location: USA Watch: ing the detectives Posts: 265	Thanks Spacedweller - I usually search first and ask questions later. I did however check the FAQ first! I'll try in order: See if I can convince it to remove itself; make some threats; sheep-dip; plasma-cutter/blue wrench; then body grinder.

21 July 2007, 08:40 AM	#7
Tools TRF Moderator & 2024 SubLV41 Patron Join Date: May 2007 Real Name: Larry Location: Mojave Desert Watch: GMT's Posts: 43,502	It's just a sticker dub.. I've saved mine by sliding a razer blade under it a bit and slowly peeling it off...I stick it on the warranty paper work If I'm not saving it I have a special Rolex Removal tool that leaves a smooth finish:

21 July 2007, 08:53 AM	#9
dubyatf Member Join Date: Jul 2007 Location: USA Watch: ing the detectives Posts: 265	Thanks for the tip CJ/Tools - I couldn't get my fingernail underneath it and figured I was missing something obvious. I can't wear the darn thing yet anyway as my AD ordered a link that may take 2 weeks! I believe the TT links are now made of 'unobtanium' and are shipped via steamer directly from Switzerland to the states! That said, I've got plenty of time to peruse the 10K-plus posts, and attend a few Holo-Removers Anonymous meetings in the mean time!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)