ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

miamiman · 7 May 2013, 08:36 AM

Hi guys, I just purchased this one ,let me know what you guys think original hands dial, im not to sure about the bezel.

tudorluv · 7 May 2013, 08:42 AM

congrats! well rounded trio!

Jannal · 7 May 2013, 08:44 AM

HL65 · 7 May 2013, 08:53 AM

Congrats!

drainaps · 7 May 2013, 08:57 AM

Nice 1675. Looks the part. Hands look the part too, including some minor "rot", proof of authenticity. Bezel is replacement. Nice 5513 and Snowie too. Winning trio of aces there.

springer · 7 May 2013, 09:33 AM

Quote:

Originally Posted by drainaps

Nice 1675. Looks the part. Hands look the part too, including some minor "rot", proof of authenticity. Bezel is replacement. Nice 5513 and Snowie too. Winning trio of aces there.

To clarify the quoted post, the bezel insert is not a replacement but an aftermarket, non-Rolex insert.

Good luck with the GMT.

miamiman · 7 May 2013, 09:36 AM

It's always been hard for me to figure out aftermarket or original bezels, what are the clues?

HL65 · 7 May 2013, 09:38 AM

Quote:

Originally Posted by springer

to clarify the quoted post, the bezel insert is not a replacement but an aftermarket, non-rolex insert.

Good luck with the gmt.

X2

Also look at a real one and you will know why in a hurry. I hope the seller disclosed that to you and I would worry more about the watch if not. JMHO.....Best,

pdoukas · 7 May 2013, 11:15 AM

Ditto on aftermarket insert on gmt

Sent from my mobile device. Please excuse spelling, punctuation, and brevity.

swish77 · 7 May 2013, 11:35 AM

Quote:

Originally Posted by miamiman

It's always been hard for me to figure out aftermarket or original bezels, what are the clues?

PM sent.

springer · 7 May 2013, 01:08 PM

Quote:

Originally Posted by miamiman

It's always been hard for me to figure out aftermarket or original bezels, what are the clues?

Below are examples of a genuine insert and an aftermarket insert. The aftermarket is usually identified by the "hooked" number 2. The top left of the 2's will hook out from the top and not be parallel to the side of the number.

Frogman4me · 7 May 2013, 01:25 PM

All three watches have incorrect inserts.

miamiman · 7 May 2013, 01:30 PM

Great info guys, I really didn't care too much if the bezel was aftermarket. I know that's an easy change....I looked at the case the dial and made sure the ref numbers and serial numbers were legit. And of course the movement...

Tudor66 · 7 May 2013, 01:36 PM

Nice GMT Pepsi, welcome to the club...!

Marrk · 7 May 2013, 01:44 PM

Quote:

Originally Posted by springer

Below are examples of a genuine insert and an aftermarket insert. The aftermarket is usually identified by the "hooked" number 2. The top left of the 2's will hook out from the top and not be parallel to the side of the number.

Good explanation. Thanks.

Marrk · 7 May 2013, 01:46 PM

Nice trio, miamiman.

What year is the 5513? Or what's the serial number?

miamiman · 7 May 2013, 03:49 PM

If remember it's a 5.3 mil ,1974 5513...

7 May 2013, 08:44 AM	#3
Jannal "TRF" Member Join Date: Oct 2009 Location: Hong Kong Posts: 685	__________________ Bell & Ross: BRS-98S Casio: G-Shock GW-5000-1JF / DW-5040 40th / DW-5035D 35th / DW-5030C 30th / DW-5000SP 20th / DW-5600C-9CV / Marlin W-450 Panerai: Luminor 000i Seiko: SBGX117 / SBGX335 / SNE543P1

7 May 2013, 08:53 AM	#4
HL65 TRF Moderator & 2024 SubLV41 Patron Join Date: Dec 2007 Real Name: Ken Location: SW Florida Watch: One on my wrist. Posts: 63,991	Congrats! __________________ *SPEM SUCCESSUS ALIT*

7 May 2013, 01:36 PM	#14
Tudor66 "TRF" Member Join Date: Aug 2011 Real Name: Al Location: California, USA Watch: GMT- Pepsi Posts: 3,462	Nice GMT Pepsi, welcome to the club...! __________________ -NAWCC Member

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

7 May 2013, 08:42 AM	#2
tudorluv "TRF" Member Join Date: Dec 2012 Real Name: Erich Location: -5 Posts: 742	congrats! well rounded trio!

7 May 2013, 08:57 AM	#5
drainaps "TRF" Member Join Date: Oct 2010 Location: Shanghai Watch: Too many to tell Posts: 522	Nice 1675. Looks the part. Hands look the part too, including some minor "rot", proof of authenticity. Bezel is replacement. Nice 5513 and Snowie too. Winning trio of aces there.

7 May 2013, 09:36 AM	#7
miamiman "TRF" Member Join Date: Sep 2009 Real Name: wil Location: miami,fl Watch: rolex 1675 Posts: 146	It's always been hard for me to figure out aftermarket or original bezels, what are the clues?

7 May 2013, 11:15 AM	#9
pdoukas "TRF" Member Join Date: Dec 2010 Real Name: Pete Location: Arizona Watch: ing Duke bball Posts: 1,488	Ditto on aftermarket insert on gmt Sent from my mobile device. Please excuse spelling, punctuation, and brevity.

7 May 2013, 01:25 PM	#12
Frogman4me Banned Join Date: Jun 2010 Location: Maryland Posts: 6,268	All three watches have incorrect inserts.

7 May 2013, 01:30 PM	#13
miamiman "TRF" Member Join Date: Sep 2009 Real Name: wil Location: miami,fl Watch: rolex 1675 Posts: 146	Great info guys, I really didn't care too much if the bezel was aftermarket. I know that's an easy change....I looked at the case the dial and made sure the ref numbers and serial numbers were legit. And of course the movement...

7 May 2013, 01:46 PM	#16
Marrk "TRF" Member Join Date: Mar 2008 Real Name: Mark Location: Los Angeles Watch: 5513 Posts: 2,192	Nice trio, miamiman. What year is the 5513? Or what's the serial number?

7 May 2013, 03:49 PM	#17
miamiman "TRF" Member Join Date: Sep 2009 Real Name: wil Location: miami,fl Watch: rolex 1675 Posts: 146	If remember it's a 5.3 mil ,1974 5513...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)