ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Numismatist · 16 November 2010, 05:14 AM

Hi Tech folks, I have the Sea-dweller toolkit screwdriver which works fine on my SD, but it's a bit for my Datejust.

Also, I have the Bergeon 6111 for bracelet removal, it too works fine on the SD but is too big for the Datejust (M-serial Jubilee).

Any thoughts on proper tools for the datejust for these two tasks?

Chris - Numismatist

hhh007 · 16 November 2010, 05:58 AM

For jubilee bracelets on datejusts I've found a 1.5 mm screwdriver works best for me.

Damage Inc. · 16 November 2010, 11:59 AM

Chris,
Have you tried the small fork end of the springbar tool?

DoubleRedRolex · 25 November 2010, 12:29 PM

Sea-dweller tool is probably 1.5mm or 1.6mm and for a Datejust, a 1.2mm is a perfect fit. I just use my screwdriver set. If you are playing around with Rolex watches then its always nice to have a good quality screwdriver set for changing bracelets and adjusting links.

16 November 2010, 05:14 AM	#1
Numismatist "TRF" Member Join Date: Nov 2007 Real Name: Chris Location: Camden ME & STT Watch: 116600 Posts: 6,350	Sea-dweller screwdriver for datejust doesn't fit? Hi Tech folks, I have the Sea-dweller toolkit screwdriver which works fine on my SD, but it's a bit for my Datejust. Also, I have the Bergeon 6111 for bracelet removal, it too works fine on the SD but is too big for the Datejust (M-serial Jubilee). Any thoughts on proper tools for the datejust for these two tasks? Chris - Numismatist __________________ Rolex 116600 Sea-dweller Montblanc Solitaire Doué Black & White Legrand FP Montblanc Solitaire Doué Black & White RB Montblanc Meisterstück Diamond Mozart BP Montblanc Meisterstück Mozart BP

16 November 2010, 05:58 AM	#2
hhh007 "TRF" Member Join Date: Jan 2010 Real Name: Howard Location: Midwest Watch: 18078 Posts: 604	For jubilee bracelets on datejusts I've found a 1.5 mm screwdriver works best for me. __________________ Day-Date Bark Finish 18078, TT Datejust Turn-O-Graph Oysterquartz 17013 Explorer I 114270

16 November 2010, 11:59 AM	#3
Damage Inc. "TRF" Member Join Date: Oct 2009 Real Name: Vic Location: Colorado, USA Watch: Mechanical!! Posts: 807	Chris, Have you tried the small fork end of the springbar tool? __________________ "Science tastes like vomit." Kari "Mythbusters hottie" Byron Z-serial GMT IIc 2.92M serial 1675 Pepsi V-serial 16610LV

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

25 November 2010, 12:29 PM	#4
DoubleRedRolex "TRF" Member Join Date: Oct 2008 Real Name: Lonnie Location: Canada Watch: Rolex 1680-8 Posts: 80	Sea-dweller tool is probably 1.5mm or 1.6mm and for a Datejust, a 1.2mm is a perfect fit. I just use my screwdriver set. If you are playing around with Rolex watches then its always nice to have a good quality screwdriver set for changing bracelets and adjusting links.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)