ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

MikeJaye · 16 July 2011, 05:57 PM

Hi, I'm getting a GMTIIC (again) and have always thought it would look much better if the centre links on the bracelet were brushed rather than polished. Are the bracelets on the 39mm Exp I and the GMTIIC exactly the same except for the finish on the centre links. Are the bracelets interchangeable between the models as I plan on swapping them over...Exp I PCL bracelet and GMTIIC brushed.

Thanks in advance
Mike

mitchy · 17 July 2011, 12:28 AM

hi, yes the bracelets are almost identicle apart from the PCLs. im planning on getting one (Exp39) for my ExpII polar 16570

DCgator · 17 July 2011, 12:33 AM

Good to know. Thanks!

MikeJaye · 17 July 2011, 12:55 AM

Quote:

Originally Posted by mitchy

hi, yes the bracelets are almost identicle apart from the PCLs. im planning on getting one (Exp39) for my ExpII polar 16570

Cool. Thanks.

Mike_Templar · 8 October 2011, 07:29 AM

You can swap a new bracelet onto an older case?

i.e. say, a GMT2C bracelet onto say, a 40mm explorer 2?

Or, as you suggest, a 39mm Explorer onto an Explorer 2?

This opens up a lot of possibilities for a collection.
I think the 39mm bracelet on the previous gen exp2 would be
just about the bee's knee's.

Mike.

16 July 2011, 05:57 PM	#1
MikeJaye Member Join Date: Jun 2008 Location: London Posts: 675	GMTIIC & Exp I bracelet swap? Hi, I'm getting a GMTIIC (again) and have always thought it would look much better if the centre links on the bracelet were brushed rather than polished. Are the bracelets on the 39mm Exp I and the GMTIIC exactly the same except for the finish on the centre links. Are the bracelets interchangeable between the models as I plan on swapping them over...Exp I PCL bracelet and GMTIIC brushed. Thanks in advance Mike

17 July 2011, 12:28 AM	#2
mitchy "TRF" Member Join Date: Apr 2010 Real Name: Mitch Location: . Watch: 116710LN Posts: 2,495	hi, yes the bracelets are almost identicle apart from the PCLs. im planning on getting one (Exp39) for my ExpII polar 16570 __________________ Time you enjoy wasting, was not wasted John Lennon

8 October 2011, 07:29 AM	#5
Mike_Templar "TRF" Member Join Date: Nov 2010 Location: Dallas Posts: 143	So what you're telling me is... You can swap a new bracelet onto an older case? i.e. say, a GMT2C bracelet onto say, a 40mm explorer 2? Or, as you suggest, a 39mm Explorer onto an Explorer 2? This opens up a lot of possibilities for a collection. I think the 39mm bracelet on the previous gen exp2 would be just about the bee's knee's. Mike.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

17 July 2011, 12:33 AM	#3
DCgator "TRF" Member Join Date: Jul 2010 Location: PNW Watch: DS,BLNR,SubLV,DJ2 Posts: 8,123	Good to know. Thanks!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)