Hi folks new guy here I need a vintage plexi

[Molson]

I would like to purchase a crystal for my wife's vintage Rolex sub dial. The watch is 14K and the only numbers I can get from inside the case back are 4019
and 61513. The case back also has the numbers 126 stamoed in a small box.

I also could use some help identifying this watch if anyone knows anything about this watch. The case back also have Rolex s.a. 31 victoires, haute precision and RWC td.

Thanks in advance for any help you folks can give me

Molson

[Robbyvm]

Postsome pics... The feedback will be more accurate

[marcello pisani]

should be the reference number , but I can't find in my records " 4019 " .. so maybe it's a " 4029 " ( square case precision manual winding ) ???

[marcello pisani]

[Molson]

Marcello,

I couldn't figure out how to paste a photo of the watch so it is now my Avatar.

The dial is 19.75mm and the case less the winding crown is 21.21 mm

I hope you can make the watch out from the small avatar

Molson

[Molson]

Also on the rear edge of the case back exposed to the wrist is engraved Modlel DeRose

If anyone can help a guy out it would be much appreciated

Molson

[kieselguhr]

Originally Posted by Molson

Marcello,

I couldn't figure out how to paste a photo of the watch so it is now my Avatar.

The dial is 19.75mm and the case less the winding crown is 21.21 mm

I hope you can make the watch out from the small avatar

Molson

Upload pics of the watch onto a web host like http://imageshack.com/

Copy the direct link

When you post, click the insert image button, paste the direct link and voila!

The insert image button is the yellow tinged mountain portrait above the typing window

Hope this helps

[Molson]

Originally Posted by kieselguhr

Upload pics of the watch onto a web host like http://imageshack.com/

Copy the direct link

When you post, click the insert image button, paste the direct link and voila!

The insert image button is the yellow tinged mountain portrait above the typing window

Hope this helps

kieselguhr

I did as you instructed - I got a message the post can't be seen until a moderator looks at it. I hope was smart enough to post the photo.

Thanks for your help

Molson

[Molson]