ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
3 June 2014, 04:54 PM | #1 |
"TRF" Member
Join Date: May 2014
Location: West Coast
Watch: Sub ND/GMT II SS
Posts: 133
|
GMT II clasp is scratched after two weeks.... Best method of polishing?
Dear Rolex friends, I am really bummed this evening as my Rolex bracelet
Is scratched only after two weeks of ownership. I know some of my friends say this builds character, but I like my bracelet to stay clean. I was coming out of my friends complex and the steel door kicked back At me leaving some large scratches on the bracelet. Should I go to a ROLEX service center and have them buff these out? What does polishing a bracelet normally cost? Any help or advice would be greatly appreciated. |
3 June 2014, 05:03 PM | #2 |
"TRF" Life Patron
Join Date: Jun 2005
Real Name: Peter
Location: Llanfairpwllgwyng
Watch: ing you.
Posts: 53,044
|
Look wearing any watch it will get scratched that's a plain and simple fact of wearing.All normal everyday scratches should be left to normal routine service time only.Then after service watch will look as good as new only to get scratched again.Now what ruins any Rolex watch is wanting to polish every time you see a scratch.Sorry if I seem a bit hard but I always try and give the true facts to Rolex watch owners and that tiny mark is on the bracelet and not the clasp.
__________________
ICom Pro3 All posts are my own opinion and my opinion only. "The clock of life is wound but once, and no man has the power to tell just when the hands will stop. Now is the only time you actually own the time, Place no faith in time, for the clock may soon be still for ever." Good Judgement comes from experience,experience comes from Bad Judgement,.Buy quality, cry once; buy cheap, cry again and again. www.mc0yad.club Second in command CEO and left handed watch winder |
3 June 2014, 05:11 PM | #3 |
"TRF" Member
Join Date: May 2014
Location: West Coast
Watch: Sub ND/GMT II SS
Posts: 133
|
Thanks again, I know it's a watch but I am a perfectionist when it comes to my time piece my friend.
|
3 June 2014, 05:41 PM | #4 |
Banned
Join Date: Jan 2013
Location: Hong Kong
Watch: Sub
Posts: 187
|
listen to peter...just leave it alone. my rolexes are scratched all the time! enjoy it! it built character!
|
3 June 2014, 05:57 PM | #5 |
"TRF" Member
Join Date: Feb 2012
Real Name: Sandy
Location: England.
Watch: 14060M 2 liner
Posts: 3,204
|
There is no need to go to RSC. Any decent watchmaker with the correct tools will easily remove those scratches for you.
|
3 June 2014, 08:36 PM | #6 |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: Aug 2012
Real Name: Lee
Location: 42.48.45N70.48.48
Watch: Too many to list!
Posts: 33,674
|
Wear until it needs servicing and have it polished then.
|
3 June 2014, 08:50 PM | #7 |
"TRF" Member
Join Date: Jun 2011
Location: Chicago
Watch: 216570
Posts: 878
|
+1 for just leaving it be.
|
3 June 2014, 09:21 PM | #8 |
"TRF" Member
Join Date: Jun 2009
Real Name: Brian
Location: Northern Virginia
Watch: One of Not Many
Posts: 17,892
|
I would polish it with a few more scratches and enjoy the watch as it was intended!
__________________
IWC Portugieser 7 Day, Omega Seamaster SMP300m, Vacheron Constantin Traditionnelle Complete Calendar, Glashutte PanoInverse, Glashutte SeaQ Panorama Date, Omega Aqua Terra 150, Omega CK 859, Omega Speedmaster 3861 Moonwatch, Breitling Superocean Steelfish, JLC Atmos Transparent Clock |
3 June 2014, 09:23 PM | #9 |
2024 SubLV41 Pledge Member
Join Date: Jul 2013
Real Name: Brian (TBone)
Location: canada
Watch: es make me smile
Posts: 77,924
|
Ads character ... Leave it be
|
3 June 2014, 09:27 PM | #10 |
"TRF" Member
Join Date: Nov 2011
Real Name: Kyung
Location: Anywhere?
Watch: cha want...
Posts: 4,488
|
Get used to it.
|
3 June 2014, 09:27 PM | #11 |
"TRF" Member
Join Date: Dec 2010
Location: N/A
Posts: 11,137
|
No
__________________
Instagram: @watches_anonymous |
3 June 2014, 09:34 PM | #12 |
2024 SubLV41 Pledge Member
Join Date: Nov 2007
Real Name: Joe
Location: New Mexico
Watch: Explorer
Posts: 12,838
|
If you're a perfectionist then watches aren't for you, unless you plan on keeping them in the box forever. Embrace the horror and you'll be a happier Rolex owner
__________________
It's Espresso, not Expresso. Coffee is not a train in Italy. -TRF Member 6982- |
3 June 2014, 09:38 PM | #13 |
"TRF" Member
Join Date: Sep 2008
Location: Beach in the Med
Watch: Hunting ...
Posts: 1,148
|
I scratched the case of my Sub on Christmas Day... the watch was only a few days old.
If your appropriately skilled/patient, the polished areas can be fixed with some decent metal polish and a pad/cotton bud. The brushed stuff kinda shrugs off the scars, unless you fancy trying to match the brush. |
3 June 2014, 09:56 PM | #14 |
Banned
Join Date: May 2014
Real Name: Douglas
Location: HSV / ANC
Watch: 126660
Posts: 626
|
|
3 June 2014, 09:59 PM | #15 |
"TRF" Member
Join Date: Nov 2010
Location: The Netherlands
Posts: 478
|
Don't doe it. I ruined my Omega Seamaster by erasing the scratches every time I saw them. Today you remover one, tommorow the new one will rise. Wear it and enjoy it. When you send it for service you can let Rolex polish it for you.
|
3 June 2014, 10:09 PM | #16 |
TRF Moderator & 2024 SubLV41 Patron
Join Date: Apr 2012
Real Name: Tim
Location: Pennsylvania
Watch: 14060M
Posts: 72,166
|
I know this is a tough one for you but if you start trying to remove them every time that you get a scratch you'll have to polish it weekly. In my experience I usually just make things worse if I try to do it myself. If you must have it done I'd suggest going to a competent jeweler rather than doing it yourself. Me, I'd wait until service time. Good luck.
PS, I'm one of those guys that generally tucks my left wrist behind my back (think high end waiter style) whenever I'm going through a doorway, just a habit I've formed when I started wearing nice watches. I bet many here do the same. My GF asked me one time if there was something wrong with my back when she saw me do this, then she realized what I was doing and just rolled her eyes...
__________________
Rolex Submariner 14060M Omega Seamaster 2254.50 DOXA Professional 1200T Card carrying member of TRF's Global Association of Retro-Grouch-Curmudgeons TRF's "After Dark" Bar & NightClub Patron P Club Member #17 2 FA ENABLED
|
3 June 2014, 11:34 PM | #17 | |
2024 SubLV41 Pledge Member
Join Date: Nov 2012
Location: Bangkok
Posts: 6,124
|
Quote:
Haha, I have to admit I often do this if I'm going through certain obstacles Sent from my SM-N900 using Tapatalk
__________________
Nil Satis Nisi Optimum |
|
3 June 2014, 11:39 PM | #18 |
2024 Pledge Member
Join Date: Nov 2005
Location: Member 202♛
Posts: 1,815
|
To answer your question, a Cape Cod cloth and some tape might help (like here: http://www.minus4plus6.com/maintenance.htm#capecod ) but I am with the others, leave it alone. After you clean up one scratch, there is just another one behind it in a day or so.
My 216570 Exp II has two years of scratches and looks fine, as does my DeepSea; -I just call the scratches "patina."
__________________
|
3 June 2014, 11:41 PM | #19 |
"TRF" Member
Join Date: Feb 2010
Location: Chicago
Posts: 2,005
|
If you polish out every scratch as it occurs the watch will spend more time at RSC than on your wrist. If that's what you bought it for then just donate it to RSC and ask for occasional visitation rights.
|
4 June 2014, 12:35 AM | #20 |
Banned
Join Date: Sep 2011
Real Name: -------
Location: -------
Watch: ---------
Posts: 12,609
|
Then wrap it in cotton and keep it in a safe...... watches are made to wear and enjoy. Polishing removes metal, you'll have no watch left after 5 years of daily wear and constant polishing.....
|
4 June 2014, 12:37 AM | #21 |
Banned
Join Date: Dec 2011
Location: Rolex Estate
Posts: 1,304
|
Cape cod cloth is ur friend
|
4 June 2014, 12:52 AM | #22 |
"TRF" Member
Join Date: May 2014
Location: West Coast
Watch: Sub ND/GMT II SS
Posts: 133
|
Thanks guys... Great to hear varying opinions.. I am throwing a scratch
party in the city if any of you are interested.. Think of it as a character building exercise.. I like the idea of tucking the watch behind your back At doorways.. I look forward to a head count on my scratch G2G. |
4 June 2014, 12:53 AM | #23 |
"TRF" Member
Join Date: May 2014
Location: West Coast
Watch: Sub ND/GMT II SS
Posts: 133
|
I will polish it during service time.... Thanks you guys rock... I want some scratch photos people....
|
4 June 2014, 12:55 AM | #24 | |
"TRF" Member
Join Date: Nov 2010
Real Name: Jim
Location: Maine & Florida
Watch: 16710,116619
Posts: 540
|
Quote:
|
|
4 June 2014, 01:09 AM | #25 | |
"TRF" Member
Join Date: May 2011
Real Name: gary
Location: Naples,FL
Watch: TT GMTII ,SUB c,
Posts: 337
|
Quote:
|
|
4 June 2014, 01:16 AM | #26 | |
TRF Moderator & 2024 SubLV41 Patron
Join Date: May 2007
Real Name: Larry
Location: Mojave Desert
Watch: GMT's
Posts: 43,502
|
Quote:
I'm not one to advocate constantly refinishing bracelets and cases because it does remove metal and being too aggressive could ruin the proper contours.. In this case, if it was mine, I would definitely touch that up for piece of mind. The RSC does not "buff it out" for you. They only refinish bracelets during a full service and consider 5 to 6 refinishes to be the life of a bracelet/case. An AD may touch it up for customer service or their watchmaker - do not expect it to be free. Here is a DIY that you can use to touch-up your bracelet.. http://www.rolexforums.com/showthread.php?t=111743
__________________
(Chill ... It's just a watch Forum.....) NAWCC Member |
|
4 June 2014, 01:18 AM | #27 |
"TRF" Member
Join Date: Dec 2013
Real Name: Anthony
Location: Brooklyn, NY
Watch: Dblue
Posts: 6,723
|
normally i would say ignore it and in a week or so youll be used to it and it will fade out in your mind. but looking at the first pic you posted, that looks like that would annoy me. i might get that polished out
|
4 June 2014, 01:20 AM | #28 |
2024 Pledge Member
Join Date: Oct 2009
Location: USA & France
Posts: 11,078
|
Just get over it. Even if you polish it there will be more signs of wear soon. Just enjoy your watch.
|
4 June 2014, 01:21 AM | #29 |
"TRF" Member
Join Date: Dec 2009
Location: New Hampshire
Watch: 116710
Posts: 305
|
Maybe you can order some new links instead of polishing.
|
4 June 2014, 02:20 AM | #30 |
"TRF" Member
Join Date: Jun 2013
Location: San Diego
Watch: Sub-C blue, DSSD
Posts: 2,482
|
On the brushed part, a Scotch-brite #7447 pad will take this out. A few brush strokes with your finger on the pad, and going with the grain should do it. Sunshine polishing cloths also work on the polished center. Good luck!
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.