ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Jack_23 · 29 January 2009, 12:56 PM

Is the laser etched crown on the GMT IIc easy to spot? I know its located at the 6 but I cant seem to find it.

WatchSmith · 29 January 2009, 01:29 PM

It's easy to spot if you have a loupe and know where to look. It's very faint, but it's there. You have to look closely to see it.

SLS · 29 January 2009, 01:38 PM

Do this
(Photo credit to rocco1109)

~Scott

RLXer_WI · 29 January 2009, 01:40 PM

hi Jack-

In my experience, the LEC on my GMT IIc has been by far the hardest to spot of any other Rolex that I have seen. I have seen this mentioned on other forums, too. Not only did I need a loop - it also had to be at a precise angle and lighting.

Jack_23 · 29 January 2009, 01:48 PM

Thanks for the reply. They seem so clear in some of the pictures and it appears as if it would be hard to miss. Thanks for clarifying.

29 January 2009, 12:56 PM	#1
Jack_23 Member Join Date: Dec 2008 Location: USA Watch: GMT IIc Posts: 29	LEC on the GMT IIc Is the laser etched crown on the GMT IIc easy to spot? I know its located at the 6 but I cant seem to find it.

29 January 2009, 01:38 PM	#3
SLS "TRF" Member Join Date: Aug 2006 Real Name: Scott Location: GMT -7 Watch: GMT's & Sub's Posts: 10,401	Do this (Photo credit to rocco1109) ~Scott __________________ "The bitterness of poor quality remains long after the sweetness of lower price is forgotten." -Benjamin Franklin Member No. 922

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

29 January 2009, 01:29 PM	#2
WatchSmith 2024 Pledge Member Join Date: Jan 2009 Location: USA Posts: 702	It's easy to spot if you have a loupe and know where to look. It's very faint, but it's there. You have to look closely to see it.

29 January 2009, 01:40 PM	#4
RLXer_WI Member Join Date: Dec 2007 Location: SE WI Posts: 105	hi Jack- In my experience, the LEC on my GMT IIc has been by far the hardest to spot of any other Rolex that I have seen. I have seen this mentioned on other forums, too. Not only did I need a loop - it also had to be at a precise angle and lighting.

29 January 2009, 01:48 PM	#5
Jack_23 Member Join Date: Dec 2008 Location: USA Watch: GMT IIc Posts: 29	Thanks for the reply. They seem so clear in some of the pictures and it appears as if it would be hard to miss. Thanks for clarifying.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)