The Rolex Forums   The Rolex Watch

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX


Go Back   Rolex Forums - Rolex Forum > Rolex & Tudor Watch Topics > Vintage Rolex Discussion

Reply
 
Thread Tools Display Modes
Old 27 December 2024, 10:43 PM   #1
mat-with-one-t
"TRF" Member
 
Join Date: Dec 2024
Location: Australia
Posts: 5
Do all these codes seem appropriate for a 5513 Sub?

Hi all. This is my first post, so be gentle! I'm a long-suffering vintage Seiko fan, but have always kept eyes open for the right Sub!! It turns out, a 1970 5513 has caught my eye. My primary criteria is originality, followed by condition and provenance. The one I'm looking at looks pretty good, and has paperwork showing service work by a reputable dealer.
In my research, most things are looking right, but one small detail has be a bit puzzled regarding the bracelet.

SHOULD END LINKS ONLY BE 580?

Bracelet is 93150
End links are 585
Clasp is 176

I note that it was the Sea Dweller 1665 that was normally supplied with 585 end links, and the Sub should perhaps be 580 only.

Is it still possible that the end links are still original to the bracelet, which is original to the watch?

Down the rabbit hole I go!

All the best,
Mat
mat-with-one-t is offline   Reply With Quote
Old 28 December 2024, 12:20 AM   #2
Dan S
2025 Pledge Member
 
Dan S's Avatar
 
Join Date: Oct 2018
Location: Colorado, USA
Posts: 6,457
A 1970 5513 (assuming that's actually the year, it's better to post the serial number so the year can be checked) would not have come with a 93150, which did not exist in 1970. A clasp code of "176" makes no sense. You should probably post photos.
__________________
@oldwatchdan on IG
Dan S is offline   Reply With Quote
Old 28 December 2024, 01:36 AM   #3
offrdmania
2025 Pledge Member
 
offrdmania's Avatar
 
Join Date: May 2008
Real Name: Matt
Location: Wine Country, Ca
Posts: 6,030
Quote:
Originally Posted by Dan S View Post
A 1970 5513 (assuming that's actually the year, it's better to post the serial number so the year can be checked) would not have come with a 93150, which did not exist in 1970. A clasp code of "176" makes no sense. You should probably post photos.
I dont think its a clasp code, I think it is referring to the year stamp which is the 1st quarter of 1976. A much later replacement bracelet.
__________________
TRF Member 11738
offrdmania is offline   Reply With Quote
Old 28 December 2024, 02:12 AM   #4
Dan S
2025 Pledge Member
 
Dan S's Avatar
 
Join Date: Oct 2018
Location: Colorado, USA
Posts: 6,457
Quote:
Originally Posted by offrdmania View Post
I dont think its a clasp code, I think it is referring to the year stamp which is the 1st quarter of 1976. A much later replacement bracelet.
Wouldn't 1976 be too late for that type of date code? It would be a letter code by 1976, IIRC.
__________________
@oldwatchdan on IG
Dan S is offline   Reply With Quote
Old 28 December 2024, 09:13 AM   #5
offrdmania
2025 Pledge Member
 
offrdmania's Avatar
 
Join Date: May 2008
Real Name: Matt
Location: Wine Country, Ca
Posts: 6,030
Quote:
Originally Posted by Dan S View Post
Wouldn't 1976 be too late for that type of date code? It would be a letter code by 1976, IIRC.
https://www.rolexforums.com/showthread.php?t=465189
__________________
TRF Member 11738
offrdmania is offline   Reply With Quote
Old 28 December 2024, 09:31 AM   #6
Dan S
2025 Pledge Member
 
Dan S's Avatar
 
Join Date: Oct 2018
Location: Colorado, USA
Posts: 6,457
Quote:
Originally Posted by offrdmania View Post
Interesting, I would have expected an "A" date code. Learned something today!
__________________
@oldwatchdan on IG
Dan S is offline   Reply With Quote
Old 28 December 2024, 09:54 AM   #7
springer
2025 Pledge Member
 
springer's Avatar
 
Join Date: Apr 2008
Real Name: jP
Location: Texas
Watch: GMT-MASTER
Posts: 17,389
Quote:
Originally Posted by Dan S View Post
Interesting, I would have expected an "A" date code. Learned something today!
Hello Dan, you are correct about clasps having an alpha date code beginning with "A" indicating 1976, but, you will also find numbered clasp date codes during the late 1970s - such as 1 76. So, you and offrdmania are both correct.

As indicated, the 93150 Oyster bracelet is not considered original for a 1970 SUBMARINER and neither are the 585 end links which were found on a SEA-DWELLER. For me, someone replaced the bracelet during some point of ownership.

The watch should have a 9315 Oyster flip-lock bracelet - probably with a 1970 or 1971 clasp code based on a 1970 date of production.
__________________
Member of NAWCC since 1990.

INSTAGRAM USER NAME: SPRINGERJFP
Visit my Instagram page to view some of the finest vintage GMTs anywhere - as well as other vintage classics.
springer is offline   Reply With Quote
Old 28 December 2024, 10:35 AM   #8
mat-with-one-t
"TRF" Member
 
Join Date: Dec 2024
Location: Australia
Posts: 5
Quote:
Originally Posted by Dan S View Post
A 1970 5513 (assuming that's actually the year, it's better to post the serial number so the year can be checked) would not have come with a 93150, which did not exist in 1970. A clasp code of "176" makes no sense. You should probably post photos.
Are you sure about the 93150? I thought I found references to this bracelet being issued with the 5513, but I could be mistaken....
mat-with-one-t is offline   Reply With Quote
Old 28 December 2024, 11:13 AM   #9
Tools
TRF Moderator & 2025 Patron
 
Tools's Avatar
 
Join Date: May 2007
Real Name: Larry
Location: Mojave Desert
Watch: GMT's
Posts: 43,573
Quote:
Originally Posted by mat-with-one-t View Post
Are you sure about the 93150? I thought I found references to this bracelet being issued with the 5513, but I could be mistaken....
The 93150 was introduced in about '75/76, and so would have been found on Subs of that age or newer. It is possible that the clasp date code I 76 is original to the bracelet, but not the watch.

If your watch is a 1970 then it could not have been "originally" issued with a 93150, although this is a correct service replacement.

Do not confuse originality with authenticity or correct for the era, these are separate categories.

It is very difficult to actually find a true original 50+ year old example, especially one that has been recently serviced. It is very likely that this one is simply accessorized and cleaned up for a sale. Nothing wrong with that, but know what you are buying if it is important to you.
__________________
(Chill ... It's just a watch Forum.....)
NAWCC Member

Last edited by Tools; 28 December 2024 at 05:19 PM.. Reason: typo correction as discussed below
Tools is offline   Reply With Quote
Old 28 December 2024, 12:39 PM   #10
Dan S
2025 Pledge Member
 
Dan S's Avatar
 
Join Date: Oct 2018
Location: Colorado, USA
Posts: 6,457
Quote:
Originally Posted by Tools View Post
The 93150 was introduced in about '95/96, and so would have been found on Subs of that age or newer. It is possible that the clasp date code I 76 is original to the bracelet, but not the watch.

If your watch is a 1970 then it could not have been "originally" issued with a 93150, although this is a correct service replacement.

Do not confuse originality with authenticity or correct for the era, these are separate categories.

It is very difficult to actually find a true original 50+ year old example, especially one that has been recently serviced. It is very likely that this one is simply accessorized and cleaned up for a sale. Nothing wrong with that, but know what you are buying if it is important to you.
I think Larry meant to type '75/76. And yes, too late for a 1970 watch (assuming that's when the watch was manufactured), and the wrong end-links. However, all things considered, if the watch itself is good and priced right, the bracelet shouldn't be a dealbreaker IMO.
__________________
@oldwatchdan on IG
Dan S is offline   Reply With Quote
Old 28 December 2024, 12:40 PM   #11
Kingface66
2025 Pledge Member
 
Kingface66's Avatar
 
Join Date: Aug 2013
Location: The Empire State
Watch: Many
Posts: 3,473
“ The 93150 was introduced in about '95/96”

Larry, I think you mean ‘75/‘76
__________________
Kingface66 is offline   Reply With Quote
Old 28 December 2024, 05:18 PM   #12
Tools
TRF Moderator & 2025 Patron
 
Tools's Avatar
 
Join Date: May 2007
Real Name: Larry
Location: Mojave Desert
Watch: GMT's
Posts: 43,573
Yes, typo guys.... wouldn't make any sense the way my old fingers said it.
__________________
(Chill ... It's just a watch Forum.....)
NAWCC Member
Tools is offline   Reply With Quote
Old 28 December 2024, 08:59 PM   #13
TuRo
"TRF" Member
 
TuRo's Avatar
 
Join Date: Jan 2022
Real Name: Paul
Location: Cantabrigia - G.B
Watch: ing the detectives
Posts: 2,917
Only thing to add to above is that 585 fetch good money, so you could buy two sets of 580s if you swapped them. Of course 93150 and 585 not orig. as everyone pointed out. 585 fit sub fine they are only microscopically wider opening - and in fact they fit 5513/1680 better than 580 (380 int') in many instances !

I remembered I also have a orig. owner 69/70 5513, that originally came on an old stock 7206 Rivet (documented on warranty) from the A.D. (an original buyer preference, cos he couldn't get his fingernail on first finger under the VERY tricky to flick open - i.e. non indented - 9315 version).
__________________
I may go out tomorrow if I can borrow a coat to wear. Oh, I'd step out in style with my sincere smile and my dancing bear. Outrageous, alarming, courageous, charming. Oh, who would think a boy and bear could be well accepted everywhere, It's just amazing how fair people can be.

S.S.A.T.A.D.B - RANDY NEWMAN
TuRo is online now   Reply With Quote
Old 29 December 2024, 11:29 AM   #14
mat-with-one-t
"TRF" Member
 
Join Date: Dec 2024
Location: Australia
Posts: 5
Hi all and so many thanks for all of the fantastic replies! I always love the detective work - that is what makes collecting so interesting!

I somehow lost my last post, so here we go again! This is all with a view to purchasing a long-hunted watch - a 1970 Sub.

So it looks like we have a circa 1976 93150/585 (possibly from a Sea Dweller) with a 176 clasp, that is too late to be original to this watch (which should have a 9315/580. I'll add some pics when I figure out how to!

Whilst I try to keep things all original, I figure this is not a dealbreaker, as it seems to be a well chosen quality authentic replacement, and I plan to WEAR the watch if I purchase it!

As for the watch, please confirm if I have it right so far! It was overhauled in approx 2018 by a reputable dealer.

Submariner 5513
Serial #2898*** (is this early 1970?)
Matte feet-first non serif dial
Attached Images
   
mat-with-one-t is offline   Reply With Quote
Old 29 December 2024, 11:42 AM   #15
mat-with-one-t
"TRF" Member
 
Join Date: Dec 2024
Location: Australia
Posts: 5
.
Attached Images
   
mat-with-one-t is offline   Reply With Quote
Old 16 January 2025, 10:45 AM   #16
mat-with-one-t
"TRF" Member
 
Join Date: Dec 2024
Location: Australia
Posts: 5
?
mat-with-one-t is offline   Reply With Quote
Old 16 January 2025, 10:58 AM   #17
Dan S
2025 Pledge Member
 
Dan S's Avatar
 
Join Date: Oct 2018
Location: Colorado, USA
Posts: 6,457
Quote:
Originally Posted by mat-with-one-t View Post
?
Apparently you are still looking for help?

Serial number lists are in the reference library:
https://www.rolexforums.com/showthread.php?t=54362
https://www.rolexforums.com/showthread.php?t=350245

Dial is non-serif.
http://5513mattedial.com

Did you have any specific questions? The case looks mediocre at first glance, but the photo doesn't really allow us to judge.
__________________
@oldwatchdan on IG
Dan S is offline   Reply With Quote
Old 16 January 2025, 11:37 AM   #18
alwayshere
"TRF" Member
 
alwayshere's Avatar
 
Join Date: Jun 2013
Location: Australia
Posts: 1,566
need better pics, OP.

The clasp code - looks like I 76? is that what you're trying to say? let the other experts chime in if thats correct for the era.
alwayshere is offline   Reply With Quote
Old 16 January 2025, 11:40 AM   #19
Dan S
2025 Pledge Member
 
Dan S's Avatar
 
Join Date: Oct 2018
Location: Colorado, USA
Posts: 6,457
Quote:
Originally Posted by alwayshere View Post
need better pics, OP.

The clasp code - looks like I 76? is that what you're trying to say? let the other experts chime in if thats correct for the era.
I think the clasp date-code has already been addressed comprehensively, but the OP still seems to have questions, judging by his recent cryptic post, "?"
__________________
@oldwatchdan on IG
Dan S is offline   Reply With Quote
Old 16 January 2025, 11:45 AM   #20
alwayshere
"TRF" Member
 
alwayshere's Avatar
 
Join Date: Jun 2013
Location: Australia
Posts: 1,566
Quote:
Originally Posted by Dan S View Post
I think the clasp date-code has already been addressed comprehensively, but the OP still seems to have questions, judging by his recent cryptic post, "?"
I did a TLDR haha
alwayshere is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

OCWatches

Wrist Aficionado

WatchShell

My Watch LLC

WatchesOff5th

DavidSW Watches

Takuya Watches


*Banners Of The Month*
This space is provided to horological resources.





Copyright ©2004-2025, The Rolex Forums. All Rights Reserved.

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Rolex is a registered trademark of ROLEX USA. The Rolex Forums is not affiliated with ROLEX USA in any way.