ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
8 June 2012, 12:07 PM | #1 |
"TRF" Member
Join Date: Jul 2011
Location: Northern VA
Watch: 14060M, 16234
Posts: 104
|
First Rolex and a few questions
Greetings Fellow WIS!
I am a LONG time lurker who, after wanting a ND Sub since a boy (20 or so years ago) finally got one! I purchased this 14060M new from an AD last week because I knew that they were no discontinued, and it was now or never. I am with some, in that I dislike the newer, larger watches (but of course to each his own!), so I always wanted the classic Sub. I also have an Omega Speedy Pro Moonwatch and blue Quartz “Bond” Seamaster. I love both of them dearly, but this is my first Rolex. I would like to thank everyone on the board for all your advice and knowledge over the past year and a half. By the time I walked into the AD, it appeared I knew more then the sales staff….lol. I have a few questions, mainly concerning the starting of the movement after it has stopped. I am awaiting insurance approval, so I have not worn the watch out yet, just a few hours a night around the apartment. A few days ago it was easy to start the movement, but today it was difficult for some reason. My questions are: 1) Is it normal for the watch to not start automatically when giving it the “gentle” swirls? A few days ago it started automatically when I did this (crystal facing me, crown up, moving it up and down). Today it did not after 20 or 30 sec of this. I know not to shake it and give it 40 turns before wearing it. 2) Is it normal for the watch to NOT start on the first or second wind of the crown? Again, it started up on the first twist for the past several times (when I did not start it via the swirl), but today, after it not starting when I swirled it, I wound the crown like 6 or 7 times, put it down(still dead) (phone rang), looked back a moment later, and it was working. Is this normal? 3) Will wearing it around for a few hour a day keep the power reserve full of does it take an entire day of wear? I am testing the accuracy and reserve right now. I wound it like 50 times (just to make sure) and am going let it run down to check the reserve. Any way to check if the rotor is working properly? Please excuse my questions if they sound noobie-ish, but I just want to make sure there is nothing wrong with my new beloved watch. THANK YOU in advance! And I know the drill after being a lurker....Here is the Pic! Mike |
8 June 2012, 12:09 PM | #2 |
TRF Moderator & 2024 SubLV41 Patron
Join Date: Jul 2007
Real Name: Rob
Location: Nearby.
Posts: 24,930
|
Excellent choice Mike..
Congratulations!
__________________
He who wears a Rolex is always on time, even when late!! TRF's "After Dark" Bar & Nightclub Patron-Founding Member.. |
8 June 2012, 12:10 PM | #3 |
"TRF" Member
Join Date: Jul 2011
Location: Northern VA
Watch: 14060M, 16234
Posts: 104
|
Thank you Sir!
|
8 June 2012, 12:15 PM | #4 |
Banned
Join Date: Apr 2006
Real Name: Richard Kloc
Location: New York
Watch: Deepsea D-Blue
Posts: 250
|
You might consider a winder, I think it's more wear & tear to screw/un-screw the crown every week than to keep the watch running. Plus it's much easier to grab-n-go in the morning with which ever watch you feel like wearing. My wife bought me a beautiful double winder this past Christmas and it's been great.
|
8 June 2012, 12:15 PM | #5 |
"TRF" Member
Join Date: Jan 2007
Real Name: Karis
Location: USA
Posts: 19,377
|
Looks great!
|
8 June 2012, 12:20 PM | #6 |
"TRF" Member
Join Date: Apr 2008
Real Name: Tom
Location: In a race car!
Watch: ME RACE PORSCHES
Posts: 24,123
|
Classic congrats!!
|
8 June 2012, 12:41 PM | #7 |
"TRF" Member
Join Date: Jul 2011
Location: Northern VA
Watch: 14060M, 16234
Posts: 104
|
Thanks again guys! I was just wondering if anyone knows about the questions posted. I know it's alot of reading and apprechate any help! Glad to finally get one!
|
8 June 2012, 12:53 PM | #8 | |
TRF Moderator & 2024 SubLV41 Patron
Join Date: Jul 2007
Real Name: Rob
Location: Nearby.
Posts: 24,930
|
Quote:
As for the last. A few hours per day will not keep it at full wind. If a few hours is your wearing habit per day, I'd suggest a manual wind every 3 or 4 days to keep it running..... Having said that, there is no harm in letting your watch rest (stop) if you are not using it!
__________________
He who wears a Rolex is always on time, even when late!! TRF's "After Dark" Bar & Nightclub Patron-Founding Member.. |
|
8 June 2012, 01:07 PM | #9 |
"TRF" Member
Join Date: Jun 2009
Real Name: Adam
Location: Orlando, Florida
Watch: Me
Posts: 9,935
|
Looks like Rob has answered your questions, congrats on the beauty by the way! A timeless classic
__________________
The richest people in the world look for and build NETWORKS, Everyone else looks for work... Robert Kiyosaki |
8 June 2012, 01:18 PM | #10 |
TRF Moderator & 2024 SubLV41 Patron
Join Date: May 2007
Real Name: Larry
Location: Mojave Desert
Watch: GMT's
Posts: 43,488
|
Excellent choice and great looking watch..
your watch is normal.. A mechanical movement, when it stops, may still have some residual torque in the drivetrain.. depending on how the gears and pinions stack against themselves, it may take more than a gentle swirl. Expect your watch to occasionally take a tap or two to start... You cannot wind your watch fully by just wearing it around the house for a few hours.. The gear ratio is designed to give the watch only a percentage of it's total wind if worn for an entire expected day.. say 8 am to 8 pm.. So, 12 hours on and 12 hours off, it only needs to put that same 12 hours of wind back into it when worn each day; not the entire 48hour reserve each day...
__________________
(Chill ... It's just a watch Forum.....) NAWCC Member |
8 June 2012, 01:42 PM | #11 |
"TRF" Member
Join Date: Jul 2011
Real Name: Gunter
Location: AL/NJ
Watch: DSSD; 116610LN
Posts: 5,509
|
What Larry said. A few hours a day won't keep the power reserve full. Your watch is fine.
|
8 June 2012, 01:44 PM | #12 |
"TRF" Member
Join Date: Oct 2007
Real Name: Dennis
Location: Bay Area - 925
Posts: 40,018
|
Congrats!
|
8 June 2012, 01:56 PM | #13 |
"TRF" Member
Join Date: Jul 2011
Location: Northern VA
Watch: 14060M, 16234
Posts: 104
|
Thanks for the advice everyone! I am very glad to know that everything is ok, but I am still checking the power reserve just to be sure. This is such a great board. I think I am going to take Wr's suggestion and get a watch winder. Any suggestions on what brand or model?
|
8 June 2012, 02:32 PM | #14 |
Banned
Join Date: Apr 2012
Location: UK
Posts: 4,345
|
Congrats!
|
8 June 2012, 02:52 PM | #15 |
"TRF" Member
Join Date: Jun 2010
Location: Colorado
Posts: 14
|
Very nice! Congrats!
|
8 June 2012, 03:19 PM | #16 |
"TRF" Member
Join Date: Jul 2006
Location: Earth
Watch: 16610LV
Posts: 949
|
Congrats!
|
8 June 2012, 03:21 PM | #17 |
Banned
Join Date: Apr 2006
Real Name: Richard Kloc
Location: New York
Watch: Deepsea D-Blue
Posts: 250
|
My wife bought me a Pangaea dual winder from Watch Winder Station. It's not an expensive winder but is working great for me, no complaints. I like that it also has a drawer underneath to hold my quartz watches. They sell other brands as well.
http://www.watchwinderstation.com/pa...chwinders.aspx |
8 June 2012, 03:36 PM | #18 |
"TRF" Member
Join Date: Dec 2009
Real Name: Jose
Location: Here
Watch: SEA-DWELLER
Posts: 2,232
|
Great watch and there is nothing wrong with it. Mine usually starts at wind number 19 from when completely dead.
Wear it and enjoy it! |
8 June 2012, 04:45 PM | #19 | |
"TRF" Member
Join Date: Oct 2010
Location: UK
Posts: 908
|
Quote:
Keeping a watch on a winder 24 hours a day could cause more wear to your watch than a few turns of the crown. At least without a watch winder you get to play with your watch, which for me is a big plus. |
|
8 June 2012, 04:55 PM | #20 |
"TRF" Member
Join Date: Nov 2011
Real Name: Jimmy
Location: Sydney
Watch: yatalkinboutwillis
Posts: 173
|
Great watch a real classic in my opinion sure wish i had the funds to acquire one now that it is discontinued
|
8 June 2012, 06:04 PM | #21 |
Member
Join Date: May 2012
Real Name: Dr P
Location: UK
Posts: 116
|
Congratulations... a Master Piece indeed
|
8 June 2012, 06:09 PM | #22 |
2024 SubLV41 Pledge Member
Join Date: Mar 2010
Location: Paris, France
Posts: 35,243
|
classic goodness. well done. congratulations!
|
8 June 2012, 06:09 PM | #23 |
"TRF" Member
Join Date: May 2012
Real Name: Bob
Location: Dallas, TX
Watch: Explorer II
Posts: 12
|
If you choose to get a winder, I'm happy with my Brookstone winder. They get good reviews and are not expensive.
|
8 June 2012, 06:26 PM | #24 | |
"TRF" Life Patron
Join Date: Jun 2005
Real Name: Peter
Location: Llanfairpwllgwyng
Watch: ing you.
Posts: 53,022
|
Quote:
__________________
ICom Pro3 All posts are my own opinion and my opinion only. "The clock of life is wound but once, and no man has the power to tell just when the hands will stop. Now is the only time you actually own the time, Place no faith in time, for the clock may soon be still for ever." Good Judgement comes from experience,experience comes from Bad Judgement,.Buy quality, cry once; buy cheap, cry again and again. www.mc0yad.club Second in command CEO and left handed watch winder |
|
8 June 2012, 08:51 PM | #25 |
"TRF" Member
Join Date: Mar 2010
Real Name: MJC
Location: PHL USA
Watch: IWC, Rolex, AP
Posts: 29,232
|
Congrats and welcome to the sub club!
__________________
|
9 June 2012, 12:22 AM | #26 |
Banned
Join Date: Sep 2011
Real Name: -------
Location: -------
Watch: ---------
Posts: 12,609
|
When the watch has stopped from lack of wear, wind it 40x's, wear and repeat.
Don't start you watch by swirling it....It will run best with a full power researve which is 40 winds |
9 June 2012, 12:26 AM | #27 |
"TRF" Member
Join Date: Dec 2011
Real Name: Steve
Location: USA
Watch: A few
Posts: 8,881
|
Congrats!
|
9 June 2012, 01:37 AM | #28 |
2024 SubLV41 Pledge Member
Join Date: Jul 2009
Location: Cave
Watch: Sundial
Posts: 33,940
|
Excellent choice!
|
9 June 2012, 04:02 AM | #29 |
"TRF" Member
Join Date: Jul 2011
Location: Northern VA
Watch: 14060M, 16234
Posts: 104
|
Thanks again guys! This forum is outstanding! I guess I will wait on the winder for a few weeks and just keep manually winding it when I wear it. Insurance papers should arrived sometime mid next week, so I will be wearing it much more after that.
|
9 June 2012, 05:13 AM | #30 |
"TRF" Member
Join Date: Feb 2009
Real Name: TSW
Location: Le Brassus
Watch: Rolex & AP's
Posts: 27,449
|
Great choice, Congrats!
__________________
AP Owners Club IG @swiss.watch.connection |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.